TFTIF-MIB :: mcmTFTPLastErrorStatus

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › TFTIF-MIB › mcmTFTPLastErrorStatus

mcmTFTPLastErrorStatus

Module: TFTIF-MIB

OID (symbolic): TFTIF-MIB::mcmTFTPLastErrorStatus

OID (numeric): 1.3.6.1.4.1.335.1.4.3.4.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: NAME = ;
DESC = This object shows the error status of \
       last TFTP operation.;
HELP = Error status values: \
          value                 meaning      \
       --------------------------------------------------\
       idle               No download has been done         \
       download-success   A download completed without error\
       out-of-memory      Not enough free memory            \
       flash-error        Could not write to flash memory   \
       download-failed    Download failed for an unknown reason \
       chksum-error       The file to download has a checksum error \
       retrieving-file    The file to download is being retrieved \
       protocol-error     TFTP had an error talking to server \
       server-error       The TFTP server sent error message, Could be bad file name \
       timeout            Could be bad ip address or network errors \
       connection-error   Setup of connection failed \
       bad-file           The file to be download was rejected;
CAPABILITIES = NET_CFG, VPN_NONE;

What is mcmTFTPLastErrorStatus?

Read-only error status of the most recent TFTP operation, with values covering success states as well as specific failure reasons like out-of-memory, flash-error, checksum-error, timeout, or bad-file. Checked immediately after a failed transfer to pinpoint the cause.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.335.1.4.3.4.1
snmpwalk -v2c -c public <target> TFTIF-MIB::mcmTFTPLastErrorStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.335.1.4.3.4.1.1
snmpget -v2c -c public <target> TFTIF-MIB::mcmTFTPLastErrorStatus.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> mcmTFTPLastErrorStatus.1

Start monitoring broadband CPE/access device using TFTP for firmware and config management (transfer status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TFTIF-MIB::mcmTFTPLastErrorStatus OID value, configure state conditions and alerts, and monitor any broadband CPE/access device using TFTP for firmware and config management (transfer status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.335micomMICOM-OSCAR-MIB
1.3.6.1.4.1.335.1productsMICOM-OSCAR-MIB
1.3.6.1.4.1.335.1.4micom_oscarMICOM-OSCAR-MIB
Numeric OIDNameModule
1.3.6.1.4.1.335.1.4.3mcmTFTPTFTIF-MIB
1.3.6.1.4.1.335.1.4.3.4mcmTFTPErrorStatusGroupTFTIF-MIB
1.3.6.1.4.1.335.1.4.3.4.1mcmTFTPLastErrorStatusTFTIF-MIB