TEMPAGER3E-MIB

All MIBs › TEMPAGER3E-MIB

Category: Temperature and Environmental Monitoring

Description: Manages TempAger 3E temperature pager device extended sensor inputs, alert thresholds, and contact closure status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TEMPAGER3E-MIB?

TEMPAGER3E-MIB is a private MIB (enterprise OID 20916) for a temperature/environmental monitoring appliance ('TempAgent 3e'-style device). Its objects report internal temperature in Celsius and Fahrenheit (scaled by 100, since SNMP has no native floating-point type), four digital sensor inputs on each of two sensor banks, and a free-text alarm message. As a hardware-status MIB it lets an administrator watch equipment-room temperature and digital sensor (door/water/smoke-style) inputs, with the alarm-message object surfacing the current fault condition in plain text. It is deployed on this vendor's environmental temperature/sensor monitoring appliance. Engineers can download the TEMPAGER3E-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TEMPAGER3E-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Environmental temperature/sensor monitoring appliance

Monitoring Examples

A facilities team monitors internal-tempc and checks alarmmessage together to get both the numeric temperature reading and a plain-language description of any active environmental alarm in the equipment room.

What Can Be Monitored

internal temperature
digital sensor inputs
active alarm message

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
IpAddress
TimeTicks
enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
avtech	1.3.6.1.4.1.20916
products	1.3.6.1.4.1.20916.1
TEMPAGER3E	1.3.6.1.4.1.20916.1.7
NTF tempager3e_snmp_trap	1.3.6.1.4.1.20916.1.7.0.2			A tempager3e-snmp-trap indicates that an alarm condition has occurred on the sensor indicated by the alarmmessage variable.
sensors	1.3.6.1.4.1.20916.1.7.1
internal	1.3.6.1.4.1.20916.1.7.1.1
temperature	1.3.6.1.4.1.20916.1.7.1.1.1
INT internal_tempc	1.3.6.1.4.1.20916.1.7.1.1.1.1	INTEGER	read-only	The internal temperature reading in Celsius. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value.
INT internal_tempf	1.3.6.1.4.1.20916.1.7.1.1.1.2	INTEGER	read-only	The internal temperature reading in Fahrenheit. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value.
digital	1.3.6.1.4.1.20916.1.7.1.2
digital_sen1	1.3.6.1.4.1.20916.1.7.1.2.1
INT digital_sen1_1	1.3.6.1.4.1.20916.1.7.1.2.1.1	INTEGER	read-only	If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage.
INT digital_sen1_2	1.3.6.1.4.1.20916.1.7.1.2.1.2	INTEGER	read-only	If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts.
INT digital_sen1_3	1.3.6.1.4.1.20916.1.7.1.2.1.3	INTEGER	read-only	If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts.
INT digital_sen1_4	1.3.6.1.4.1.20916.1.7.1.2.1.4	INTEGER	read-only	If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts.
digital_sen2	1.3.6.1.4.1.20916.1.7.1.2.2
INT digital_sen2_1	1.3.6.1.4.1.20916.1.7.1.2.2.1	INTEGER	read-only	If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage.
INT digital_sen2_2	1.3.6.1.4.1.20916.1.7.1.2.2.2	INTEGER	read-only	If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts.
INT digital_sen2_3	1.3.6.1.4.1.20916.1.7.1.2.2.3	INTEGER	read-only	If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts.
INT digital_sen2_4	1.3.6.1.4.1.20916.1.7.1.2.2.4	INTEGER	read-only	If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts.
traps	1.3.6.1.4.1.20916.1.7.2
OCT alarmmessage	1.3.6.1.4.1.20916.1.7.2.1	OCTET STRING	read-only	Last Alarm Message

RFC description

Vendor-specific MIB for Tempager 3E environmental monitoring or management system; likely temperature/facility-related controls.

Start monitoring Environmental temperature/sensor monitoring appliance (temperature/digital-sensor/alarm-message status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TEMPAGER3E-MIB

What Is TEMPAGER3E-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description