TEMPAGER-MIB

All MIBs › TEMPAGER-MIB

Category: Temperature and Environmental Monitoring

Description: Manages TempAger temperature monitoring and pager alert device sensor readings, thresholds, and alarm notifications.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TEMPAGER-MIB?

TEMPAGER-MIB is a vendor-specific SNMP module (AVTECH TemPageR product line) for a dedicated environmental monitoring appliance that reads temperature sensors and can trigger pager/alert notifications when thresholds are crossed. It exposes multi-channel temperature readings in both Celsius and Fahrenheit along with per-channel alarm threshold settings, making it a pure environmental-sensor MIB rather than one covering interfaces or traffic. Its entire purpose is hardware status monitoring: tempreading1c through tempreading4c (and their Fahrenheit counterparts) report live sensor temperatures, while alarmtemp1 through alarmtemp4 define the alarm thresholds used to flag over-temperature conditions in a monitored room, cabinet, or rack. No dependency on other standard MIBs is evident; it is a small, self-contained enterprise MIB under the avtech/products tree. It is typically deployed in data centers or equipment closets where the TempAgeR unit is polled by an NMS purely for ambient/equipment temperature and alarm-threshold status, independent of any networking hardware it happens to sit near. Engineers can download the TEMPAGER-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TEMPAGER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

AVTECH TempAgeR temperature monitoring/pager appliance

Monitoring Examples

An operator would poll tempreading1c and tempreading1f to get the current temperature from sensor probe 1 in both units, and compare it against alarmtemp1 to determine whether the room has crossed its configured warning threshold. If tempreading3c climbs above alarmtemp3 while the corresponding channel is otherwise idle, that signals a real environmental event (e.g., failed HVAC) rather than a networking fault. Because the device supports up to four independent probes, an NMS dashboard would typically graph all four tempreadingNc channels together to spot a localized hotspot in a rack.

What Can Be Monitored

sensor 1-4 temperature in Celsius
sensor 1-4 temperature in Fahrenheit
sensor 1-4 alarm threshold
over-temperature alarm state

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
IpAddress
TimeTicks
enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
avtech	1.3.6.1.4.1.20916
products	1.3.6.1.4.1.20916.1
tempager	1.3.6.1.4.1.20916.1.1
NTF alarmstart1_t4	1.3.6.1.4.1.20916.1.1.0.1			A alarmstart1 trap signifies that the current temperature on sensor 1 is outside the defined high or low threshold.
NTF tempager_snmp_trap	1.3.6.1.4.1.20916.1.1.0.2			A tempager-snmp-trap indicates that an alarm condition has occurred on the sensor inidcated by the alarmmessage variable.
NTF alarmstart2_t4	1.3.6.1.4.1.20916.1.1.0.3			A alarmstart2 trap signifies that the current temperature on sensor 2 is outside the defined high or low threshold.
NTF alarmclear2_t4	1.3.6.1.4.1.20916.1.1.0.4			A alarmclear2 trap signifies that the current temperature on sensor 2 has returned to a normal condition and is within the defined high or low threshold.
NTF alarmstart3_t4	1.3.6.1.4.1.20916.1.1.0.5			A alarmstart3 trap signifies that the current temperature on sensor 3 is outside the defined high or low threshold.
NTF alarmclear3_t4	1.3.6.1.4.1.20916.1.1.0.6			A alarmclear3 trap signifies that the current temperature on sensor 3 has returned to a normal condition and is within the defined high or low threshold.
NTF alarmstart4_t4	1.3.6.1.4.1.20916.1.1.0.7			A alarmstart4 trap signifies that the current temperature on sensor 4 is outside the defined high or low threshold.
NTF alarmclear4_t4	1.3.6.1.4.1.20916.1.1.0.8			A alarmclear4 trap signifies that the current temperature on sensor 4 has returned to a normal condition and is within the defined high or low threshold.
sensors	1.3.6.1.4.1.20916.1.1.1
temperature	1.3.6.1.4.1.20916.1.1.1.1
INT tempreading1c	1.3.6.1.4.1.20916.1.1.1.1.1	INTEGER	read-only	Temperature Sensor 1 (Celsius)
INT tempreading2c	1.3.6.1.4.1.20916.1.1.1.1.2	INTEGER	read-only	Temperature Sensor 2 (Celsius)
INT tempreading3c	1.3.6.1.4.1.20916.1.1.1.1.3	INTEGER	read-only	Temperature Sensor 3 (Celsius)
INT tempreading4c	1.3.6.1.4.1.20916.1.1.1.1.4	INTEGER	read-only	Temperature Sensor 4 (Celsius)
INT tempreading1f	1.3.6.1.4.1.20916.1.1.1.1.5	INTEGER	read-only	Temperature Sensor 1 (Fahrenheit)
INT tempreading2f	1.3.6.1.4.1.20916.1.1.1.1.6	INTEGER	read-only	Temperature Sensor 2 (Fahrenheit)
INT tempreading3f	1.3.6.1.4.1.20916.1.1.1.1.7	INTEGER	read-only	Temperature Sensor 3 (Fahrenheit)
INT tempreading4f	1.3.6.1.4.1.20916.1.1.1.1.8	INTEGER	read-only	Temperature Sensor 4 (Fahrenheit)
traps	1.3.6.1.4.1.20916.1.1.2
INT alarmtemp1	1.3.6.1.4.1.20916.1.1.2.1	INTEGER	read-only	Alarm for temperature 1 0 = temperature OK 1 = temperature too high 2 = temperature too low
INT alarmtemp2	1.3.6.1.4.1.20916.1.1.2.2	INTEGER	read-only	Alarm for temperature 2 0 = temperature OK 1 = temperature too high 2 = temperature too low
INT alarmtemp3	1.3.6.1.4.1.20916.1.1.2.3	INTEGER	read-only	Alarm for temperature 3 0 = temperature OK 1 = temperature too high 2 = temperature too low
INT alarmtemp4	1.3.6.1.4.1.20916.1.1.2.4	INTEGER	read-only	Alarm for temperature 4 0 = temperature OK 1 = temperature too high 2 = temperature too low
OCT alarmmessage	1.3.6.1.4.1.20916.1.1.2.5	OCTET STRING	read-write	Message string to send with trap messages
thresholds	1.3.6.1.4.1.20916.1.1.3
INT upperlimit1	1.3.6.1.4.1.20916.1.1.3.1	INTEGER	read-only	High temperature threshold for temperature sensor 1
INT lowerlimit1	1.3.6.1.4.1.20916.1.1.3.2	INTEGER	read-only	Low temperature threshold for temperature sensor 1
INT upperlimit2	1.3.6.1.4.1.20916.1.1.3.3	INTEGER	read-only	High temperature threshold for temperature sensor 2
INT lowerlimit2	1.3.6.1.4.1.20916.1.1.3.4	INTEGER	read-only	Low temperature threshold for temperature sensor 2
INT upperlimit3	1.3.6.1.4.1.20916.1.1.3.5	INTEGER	read-only	High temperature threshold for temperature sensor 3
INT lowerlimit3	1.3.6.1.4.1.20916.1.1.3.6	INTEGER	read-only	Low temperature threshold for temperature sensor 3
INT upperlimit4	1.3.6.1.4.1.20916.1.1.3.7	INTEGER	read-only	High temperature threshold for temperature sensor 4
INT lowerlimit4	1.3.6.1.4.1.20916.1.1.3.8	INTEGER	read-only	Low temperature threshold for temperature sensor 4

RFC description

AVTECH Software TemPageR temperature monitoring appliance MIB providing management objects for temperature sensors and threshold configuration.

Start monitoring AVTECH TempAgeR temperature monitoring/pager appliance (multi-channel temperature/alarm-threshold status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TEMPAGER-MIB

What Is TEMPAGER-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description