TELSEY-STB-MIB

All MIBs › TELSEY-STB-MIB

Category: Consumer Premises and Set-Top Box

Description: Manages Telsey set-top box devices, including tuner status, stream reception quality, and subscriber service parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TELSEY-STB-MIB?

TELSEY-STB-MIB is a vendor-specific MIB from Telsey S.p.A. (enterprise OID telsey, enterprises 10171) that models management of Telsey set-top box devices; unlike the hint's description of tuner/stream-reception monitoring, the actual object set covers hardware/software identification, network configuration, firmware upgrade control, TV output settings, and an embedded browser/player subsystem rather than tuner status or stream-quality counters. It exposes device identity in stbInfo (hwVersion, swVersion, stbStatus for standby states), IP networking in networkIP (ipMode, ipAddress, ipGateway, ipDNS), firmware upgrade parameters in systemUpgrade (upgradeMode, upgradeMulticastGroup/Port, upgradeTftpIpAddress/FileName), and subscriber-facing configuration such as tvHdmiMode, subtitlesLanguage, and audioLanguage. This lets an operator confirm a deployed STB is reachable, running the expected firmware version, and correctly configured for its multicast-based upgrade mechanism, and remotely reboot or ping the unit via stbAction. It uses legacy RFC-1212/RFC1155-SMI conventions rather than SNMPv2 constructs. It is deployed on Telsey set-top boxes used in IPTV/broadcast subscriber deployments, and administrators can download the TELSEY-STB-MIB file to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TELSEY-STB-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Telsey set-top box (STB) devices

Monitoring Examples

An operator polls hwVersion and swVersion for a fleet of set-top boxes after pushing an upgrade, checking upgradeRestoreInfo for error(2) and stbStatus to confirm the unit returned to running(0); a unit still reporting the prior swVersion or an error restore status would indicate a failed firmware upgrade needing a manual actionReboot.

What Can Be Monitored

hardware/software version identification
STB power/standby status
IP network configuration (address, gateway, DNS)
firmware upgrade mode and TFTP/multicast upgrade source
upgrade restore/error status
audio/subtitle language and HDMI output configuration

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
telsey	1.3.6.1.4.1.10171
stb	1.3.6.1.4.1.10171.2
stbInfo	1.3.6.1.4.1.10171.2.1
STR hwVersion	1.3.6.1.4.1.10171.2.1.1	DisplayString	read-only	Read STB hardware version.
STR swVersion	1.3.6.1.4.1.10171.2.1.2	DisplayString	read-only	Read STB software version.
STR vendorVersion	1.3.6.1.4.1.10171.2.1.3	DisplayString	read-only	Read STB vendor name (always 'telsey').
INT collectLog	1.3.6.1.4.1.10171.2.1.4	INTEGER	read-write	Collect STB log.
INT stbStatus	1.3.6.1.4.1.10171.2.1.5	INTEGER	read-write	Get/Set STB status, including standby
stbNetwork	1.3.6.1.4.1.10171.2.2
networkIP	1.3.6.1.4.1.10171.2.2.1
INT ipMode	1.3.6.1.4.1.10171.2.2.1.1	INTEGER	read-write	Upgrade STB firmware.
IP ipAddress	1.3.6.1.4.1.10171.2.2.1.2	IpAddress	read-write	Get/Set STB IP address.
IP ipNetmask	1.3.6.1.4.1.10171.2.2.1.3	IpAddress	read-write	Get/Set STB IP netmask.
IP ipGateway	1.3.6.1.4.1.10171.2.2.1.4	IpAddress	read-write	Get/Set STB IP gateway.
IP ipDNS	1.3.6.1.4.1.10171.2.2.1.5	IpAddress	read-write	Get/Set STB IP DNS.
networkTime	1.3.6.1.4.1.10171.2.2.2
INT timeActive	1.3.6.1.4.1.10171.2.2.2.1	INTEGER	read-write	Upgrade STB firmware.
IP timeServer	1.3.6.1.4.1.10171.2.2.2.2	IpAddress	read-write	Get/Set STB Network Time server IP address.
STR timeZone	1.3.6.1.4.1.10171.2.2.2.3	DisplayString	read-write	Get/Set STB Timezone Country.
systemUpgrade	1.3.6.1.4.1.10171.2.3
INT upgradeActivate	1.3.6.1.4.1.10171.2.3.1	INTEGER	read-write	Active means it checks for newer image from network at boot time.
INT upgradeMode	1.3.6.1.4.1.10171.2.3.2	INTEGER	read-write	Get/Set upgrade mode.
IP upgradeMulticastGroup	1.3.6.1.4.1.10171.2.3.3	IpAddress	read-write	Get/Set Multicast IP Group.
INT upgradeMulticastPort	1.3.6.1.4.1.10171.2.3.4	INTEGER	read-write	Get/Set Multicast Port.
IP upgradeTftpIpAddress	1.3.6.1.4.1.10171.2.3.5	IpAddress	read-write	Get/Set TFTP Server IP address.
STR upgradeTftpFileName	1.3.6.1.4.1.10171.2.3.6	DisplayString	read-write	Get/Set Upgrade Package Name in the TFTP server.
STR upgradeMultipleServer	1.3.6.1.4.1.10171.2.3.7	DisplayString	read-write	Get/Set list of HTTP URLs.
INT upgradeRestoreInfo	1.3.6.1.4.1.10171.2.3.8	INTEGER	read-write	Restore Info for Upgrade .
stbSystem	1.3.6.1.4.1.10171.2.4
INT tvSignal	1.3.6.1.4.1.10171.2.4.1	INTEGER	read-write	Get/Set STB TV signal. Some TV with RGB input only doesn't want Composite input signal.
INT tvHdmiActivate	1.3.6.1.4.1.10171.2.4.2	INTEGER	read-write	Enable/Disable HDMI.
INT tvHdmiMode	1.3.6.1.4.1.10171.2.4.3	INTEGER	read-write	Get/Set HDMI format
INT tvFormat	1.3.6.1.4.1.10171.2.4.4	INTEGER	read-write	Get/Set STB TV format. Normal 4:3 (3), Wide 16:9 (2), 4:3 Letterbox (1)
INT tvBootAutoSwitch	1.3.6.1.4.1.10171.2.4.5	INTEGER	read-write	Get/Set STB TV autoswitch during boot up sequence.
INT tvAudio	1.3.6.1.4.1.10171.2.4.6	INTEGER	read-write	Get/Set STB TV audio volume.
stbBrowser	1.3.6.1.4.1.10171.2.5
STR browserHomepage	1.3.6.1.4.1.10171.2.5.1	DisplayString	read-write	Get/Set STB T-Browsing home page.
STR browserURL	1.3.6.1.4.1.10171.2.5.2	DisplayString	read-write	Get/Set STB T-Browsing home page.
browserProxy	1.3.6.1.4.1.10171.2.5.3
INT proxyMethod	1.3.6.1.4.1.10171.2.5.3.1	INTEGER	read-write	Get/Set method to use to set proxy.
IP proxyServer	1.3.6.1.4.1.10171.2.5.3.2	IpAddress	read-write	Get/Set Proxy server IP address.
browserWindow	1.3.6.1.4.1.10171.2.5.4
INT windowMode	1.3.6.1.4.1.10171.2.5.4.1	INTEGER	read-write	Get/Set STB browser window mode
INT windowWidth	1.3.6.1.4.1.10171.2.5.4.2	INTEGER	read-write	Get/Set STB browser window width in pixel.
INT windowHeight	1.3.6.1.4.1.10171.2.5.4.3	INTEGER	read-write	Get/Set STB browser window height in pixel.
INT windowXPos	1.3.6.1.4.1.10171.2.5.4.4	INTEGER	read-write	Get/Set STB browser window X Position.
INT windowYPos	1.3.6.1.4.1.10171.2.5.4.5	INTEGER	read-write	Get/Set STB browser window Y Position.
browserLink	1.3.6.1.4.1.10171.2.5.5
INT linkVisited	1.3.6.1.4.1.10171.2.5.5.1	INTEGER	read-write	Get/Set STB browser visited link color.
browserFont	1.3.6.1.4.1.10171.2.5.6
INT fontSize	1.3.6.1.4.1.10171.2.5.6.1	INTEGER	read-write	Get/Set STB browser font size.
INT browserLanguage	1.3.6.1.4.1.10171.2.5.7	INTEGER	read-write	Get/Set STB browser language.
browserToolbar	1.3.6.1.4.1.10171.2.5.8
INT toolbarActivate	1.3.6.1.4.1.10171.2.5.8.1	INTEGER	read-write	Show / hide browser navigation toolbar.
STR browserHomepageRollover	1.3.6.1.4.1.10171.2.5.9	DisplayString	read-write	Get/Set STB T-Browsing home page.
INT browserDelay	1.3.6.1.4.1.10171.2.5.10	INTEGER	read-write	Get/Set Delay Browser Execution
stbPlayer	1.3.6.1.4.1.10171.2.6
playerSubtitles	1.3.6.1.4.1.10171.2.6.1
INT subtitlesActivate	1.3.6.1.4.1.10171.2.6.1.1	INTEGER	read-write	Show / hide videostreaming subtitles.
INT subtitlesLanguage	1.3.6.1.4.1.10171.2.6.1.2	INTEGER	read-write	Get/Set STB videostreaming subtitles language.
playerAudio	1.3.6.1.4.1.10171.2.6.2
INT audioLanguage	1.3.6.1.4.1.10171.2.6.2.1	INTEGER	read-write	Get/Set STB videostreaming audio language.
stbRemoteManager	1.3.6.1.4.1.10171.2.7
STR remoteMGroup	1.3.6.1.4.1.10171.2.7.1	DisplayString	read-write	Get/Set Group to belong for the Remote Management.
STR remoteMUser	1.3.6.1.4.1.10171.2.7.2	DisplayString	read-write	Get/Set User for the Remote Management.
STR remoteMPwd	1.3.6.1.4.1.10171.2.7.3	DisplayString	read-write	Get/Set Password of the User for Remote Management.
INT remoteMProtocol	1.3.6.1.4.1.10171.2.7.4	INTEGER	read-write	Get/Set Remote Management Protocol.
INT remoteMEncryptActivate	1.3.6.1.4.1.10171.2.7.5	INTEGER	read-write	Active means use encryption at next reboot.
INT remoteMEncryptAlgo	1.3.6.1.4.1.10171.2.7.6	INTEGER	read-write	Get/Set Algorithm for the Encryption.
stbAction	1.3.6.1.4.1.10171.2.8
INT actionReboot	1.3.6.1.4.1.10171.2.8.1	INTEGER	write-only	Reboot Set Top Box.
IP actionPing	1.3.6.1.4.1.10171.2.8.2	IpAddress	read-write	Return alive message.

RFC description

Telsey set-top box (STB) MIB for monitoring operational metrics, channel tuning, signal quality, and content delivery on cable television and IPTV devices.

Start monitoring Telsey set-top box (STB) devices (firmware/network config, IPTV subscriber settings) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TELSEY-STB-MIB

What Is TELSEY-STB-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

RFC description