All MIBs › TELSEY-STB-MIB › upgradeRestoreInfo
upgradeRestoreInfo
Module: TELSEY-STB-MIB
OID (symbolic): TELSEY-STB-MIB::upgradeRestoreInfo
OID (numeric): 1.3.6.1.4.1.10171.2.3.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Restore Info for Upgrade .
What is upgradeRestoreInfo?
Reports or sets the outcome of a post-upgrade configuration restore — not-needed(0), do-done(1), or error(2) — letting an admin confirm settings were correctly carried over after a firmware update, or spot one that needs manual reconfiguration.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.10171.2.3.8 snmpwalk -v2c -c public <target> TELSEY-STB-MIB::upgradeRestoreInfo
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.10171.2.3.8.1 snmpget -v2c -c public <target> TELSEY-STB-MIB::upgradeRestoreInfo.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.10171.2.3.8.1 i <value>
Start monitoring Telsey set-top box (STB) devices (firmware/network config, IPTV subscriber settings) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELSEY-STB-MIB::upgradeRestoreInfo OID value, configure state conditions and alerts, and monitor any Telsey set-top box (STB) devices (firmware/network config, IPTV subscriber settings) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.10171 | telsey | TELSEY-STB-MIB |
| 1.3.6.1.4.1.10171.2 | stb | TELSEY-STB-MIB |
| 1.3.6.1.4.1.10171.2.3 | systemUpgrade | TELSEY-STB-MIB |
| 1.3.6.1.4.1.10171.2.3.8 | upgradeRestoreInfo | TELSEY-STB-MIB |