All MIBs › TELSEY-STB-MIB › upgradeMulticastPort
upgradeMulticastPort
Module: TELSEY-STB-MIB
OID (symbolic): TELSEY-STB-MIB::upgradeMulticastPort
OID (numeric): 1.3.6.1.4.1.10171.2.3.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Get/Set Multicast Port.
What is upgradeMulticastPort?
Gets or sets the UDP port number the set-top box listens on for the multicast firmware update stream, paired with upgradeMulticastGroup to fully address the update feed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.10171.2.3.4 snmpwalk -v2c -c public <target> TELSEY-STB-MIB::upgradeMulticastPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.10171.2.3.4.1 snmpget -v2c -c public <target> TELSEY-STB-MIB::upgradeMulticastPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.10171.2.3.4.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> upgradeMulticastPort.1
Start monitoring Telsey set-top box (STB) devices (firmware/network config, IPTV subscriber settings) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELSEY-STB-MIB::upgradeMulticastPort OID value, configure state conditions and alerts, and monitor any Telsey set-top box (STB) devices (firmware/network config, IPTV subscriber settings) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.10171 | telsey | TELSEY-STB-MIB |
| 1.3.6.1.4.1.10171.2 | stb | TELSEY-STB-MIB |
| 1.3.6.1.4.1.10171.2.3 | systemUpgrade | TELSEY-STB-MIB |
| 1.3.6.1.4.1.10171.2.3.4 | upgradeMulticastPort | TELSEY-STB-MIB |