TELDAT-MON-PROTOCOL-DLSw-MIB :: telProdNpMonProtDLSwSAPCommand

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TELDAT-MON-PROTOCOL-DLSw-MIB › telProdNpMonProtDLSwSAPCommand

telProdNpMonProtDLSwSAPCommand

Module: TELDAT-MON-PROTOCOL-DLSw-MIB

OID (symbolic): TELDAT-MON-PROTOCOL-DLSw-MIB::telProdNpMonProtDLSwSAPCommand

OID (numeric): 1.3.6.1.4.1.2007.4.1.2.3.7.6.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Variable used to open or close SAPs. In a set operation the values 2 (open-sap) and 3 (close-sap) are accepted, and in a get operation the value 1 will be get if the open-SAP operation succeede, and 4 (invalid) if the open-SAP operation failed.

What is telProdNpMonProtDLSwSAPCommand?

Writing open-sap(2) or close-sap(3) enables or disables data transmission on this interface's SAP for DLSw; reading it back returns valid(1) if the open succeeded or not-valid(4) if it failed, per its own DESCRIPTION. It should be executed on the router at the session-initiator side of the connection.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.2.3.7.6.1.3
snmpwalk -v2c -c public <target> TELDAT-MON-PROTOCOL-DLSw-MIB::telProdNpMonProtDLSwSAPCommand

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.2.3.7.6.1.3.1
snmpget -v2c -c public <target> TELDAT-MON-PROTOCOL-DLSw-MIB::telProdNpMonProtDLSwSAPCommand.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2007.4.1.2.3.7.6.1.3.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> telProdNpMonProtDLSwSAPCommand.1

Start monitoring Teldat router (DLSw peer/circuit status for SNA/NetBIOS-over-IP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELDAT-MON-PROTOCOL-DLSw-MIB::telProdNpMonProtDLSwSAPCommand OID value, configure state conditions and alerts, and monitor any Teldat router (DLSw peer/circuit status for SNA/NetBIOS-over-IP) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2007teldatTELDAT-MIB
1.3.6.1.4.1.2007.4telproductsTELDAT-MIB
1.3.6.1.4.1.2007.4.1telProductsNucleoxTELDAT-SW-STRUCTURE-MIB
1.3.6.1.4.1.2007.4.1.2telProductsNpMonitTELDAT-SW-STRUCTURE-MIB
1.3.6.1.4.1.2007.4.1.2.3telProdNpMonProtocolsTELDAT-SW-STRUCTURE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2007.4.1.2.3.7telProdNpMonProtDLSwTELDAT-MON-PROTOCOL-DLSw-MIB
1.3.6.1.4.1.2007.4.1.2.3.7.6telProdNpMonProtDLSwSAPTableTELDAT-MON-PROTOCOL-DLSw-MIB
1.3.6.1.4.1.2007.4.1.2.3.7.6.1telProdNpMonProtDLSwSAPEntryTELDAT-MON-PROTOCOL-DLSw-MIB
1.3.6.1.4.1.2007.4.1.2.3.7.6.1.3telProdNpMonProtDLSwSAPCommandTELDAT-MON-PROTOCOL-DLSw-MIB