TELDAT-MON-PROTOCOL-DLSw-MIB :: telProdNpMonProtDLSwQLLCSessQLLCState

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TELDAT-MON-PROTOCOL-DLSw-MIB › telProdNpMonProtDLSwQLLCSessQLLCState

telProdNpMonProtDLSwQLLCSessQLLCState

Module: TELDAT-MON-PROTOCOL-DLSw-MIB

OID (symbolic): TELDAT-MON-PROTOCOL-DLSw-MIB::telProdNpMonProtDLSwQLLCSessQLLCState

OID (numeric): 1.3.6.1.4.1.2007.4.1.2.3.7.9.2.1.7

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: QLLC session state. The possible states are: NET_DOWN : QLLC interface down. QLLC_CNX_OFF : X.25 connection disconnected. QLLC_CNX_PEND : X.25 connection pending. DISCONNECTED : QLLC session disconnected. TEST_PEND : RESOLVE_PEND : Pending on finding remote station. CONNECTED : QLLC session open. CONTACTED : QLLC session active. NULL_XID_PEND : Waiting for empty XID. XID_0_PEND : DISC_PEND : Waiting for QLLC session disconnection. XID_PEND : Session waiting for XID response. CONN_REQ_PEND : QLLC session pending connection. CS_PEND : CONN_PEND : CONN_PEND2 : SEC_IDLE : SEC_NXID_PEND : SEC_CTAC_PEND :

What is telProdNpMonProtDLSwQLLCSessQLLCState?

Reports this QLLC session's current state in its connection state machine, spanning X.25-level states like qllc-cnx-pend/qllc-cnx-off and SNA-level states like connected(7)/contacted(8), per its own DESCRIPTION; contacted is the healthy steady state once the session is fully active.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.2.3.7.9.2.1.7
snmpwalk -v2c -c public <target> TELDAT-MON-PROTOCOL-DLSw-MIB::telProdNpMonProtDLSwQLLCSessQLLCState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.2.3.7.9.2.1.7.1
snmpget -v2c -c public <target> TELDAT-MON-PROTOCOL-DLSw-MIB::telProdNpMonProtDLSwQLLCSessQLLCState.1

Start monitoring Teldat router (DLSw peer/circuit status for SNA/NetBIOS-over-IP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELDAT-MON-PROTOCOL-DLSw-MIB::telProdNpMonProtDLSwQLLCSessQLLCState OID value, configure state conditions and alerts, and monitor any Teldat router (DLSw peer/circuit status for SNA/NetBIOS-over-IP) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2007teldatTELDAT-MIB
1.3.6.1.4.1.2007.4telproductsTELDAT-MIB
1.3.6.1.4.1.2007.4.1telProductsNucleoxTELDAT-SW-STRUCTURE-MIB
1.3.6.1.4.1.2007.4.1.2telProductsNpMonitTELDAT-SW-STRUCTURE-MIB
1.3.6.1.4.1.2007.4.1.2.3telProdNpMonProtocolsTELDAT-SW-STRUCTURE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2007.4.1.2.3.7telProdNpMonProtDLSwTELDAT-MON-PROTOCOL-DLSw-MIB
1.3.6.1.4.1.2007.4.1.2.3.7.9telProdNpMonProtDLSwQLLCGroupTELDAT-MON-PROTOCOL-DLSw-MIB
1.3.6.1.4.1.2007.4.1.2.3.7.9.2telProdNpMonProtDLSwQLLCSessionsTableTELDAT-MON-PROTOCOL-DLSw-MIB
1.3.6.1.4.1.2007.4.1.2.3.7.9.2.1telProdNpMonProtDLSwQLLCSessionsEntryTELDAT-MON-PROTOCOL-DLSw-MIB
1.3.6.1.4.1.2007.4.1.2.3.7.9.2.1.7telProdNpMonProtDLSwQLLCSessQLLCStateTELDAT-MON-PROTOCOL-DLSw-MIB