TELDAT-MON-PROTOCOL-DLSw-MIB :: telProdNpMonProtDLSwActSessState

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TELDAT-MON-PROTOCOL-DLSw-MIB › telProdNpMonProtDLSwActSessState

telProdNpMonProtDLSwActSessState

Module: TELDAT-MON-PROTOCOL-DLSw-MIB

OID (symbolic): TELDAT-MON-PROTOCOL-DLSw-MIB::telProdNpMonProtDLSwActSessState

OID (numeric): 1.3.6.1.4.1.2007.4.1.2.3.7.4.1.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Session current status: DISCONNECTED - Initial status hasn't a circuit or an established connection. RSLV_PEND - The DLSw target is waiting for a SSP_started indication after a SSP_start request. CIRC_PEND - The DLSw target is waiting for a SSP_REACHACK answer to a SSP_ICANREACH message. CIRC_EST - Circuit has been established end to end. CIR_RSTRT - The DLSw that originated reset is waiting for the reboot CONN_PEND - The DLSw source is waiting for a SSP_CONTACTED answer to a SSP_CONTACT message. CONT_PEND - The DLSw end is waiting for a SSP_CONTACTED confirmation to a SSP_CONTACT message. CONNECT_STATE - DISC_PEND - The DLSw that originated the disconnection is waiting for a SSP_HALTED answer to a SSP_HALT message. HALT_PENDING - The DLSw is waiting for a SSP_HALTED indication after a SSP_HALT request. RESTART_PEND - The remote DLSw is waiting for a SSP_HALTED indication after a SSP_HALT request. WAIT_NOACK - CIRC_STRT - HLT_NOACK -

What is telProdNpMonProtDLSwActSessState?

Reports this session's current stage in the DLSw circuit-establishment/teardown state machine, such as disconnected, circ-pend (waiting on a reach-ack), circ-est (circuit fully established end-to-end), or disc-pend (waiting to confirm disconnection), per its own DESCRIPTION. Admins read circ-est as the healthy steady state and any *-pend value lingering as a stuck negotiation.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.2.3.7.4.1.1.6
snmpwalk -v2c -c public <target> TELDAT-MON-PROTOCOL-DLSw-MIB::telProdNpMonProtDLSwActSessState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.2.3.7.4.1.1.6.1
snmpget -v2c -c public <target> TELDAT-MON-PROTOCOL-DLSw-MIB::telProdNpMonProtDLSwActSessState.1

Start monitoring Teldat router (DLSw peer/circuit status for SNA/NetBIOS-over-IP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELDAT-MON-PROTOCOL-DLSw-MIB::telProdNpMonProtDLSwActSessState OID value, configure state conditions and alerts, and monitor any Teldat router (DLSw peer/circuit status for SNA/NetBIOS-over-IP) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2007teldatTELDAT-MIB
1.3.6.1.4.1.2007.4telproductsTELDAT-MIB
1.3.6.1.4.1.2007.4.1telProductsNucleoxTELDAT-SW-STRUCTURE-MIB
1.3.6.1.4.1.2007.4.1.2telProductsNpMonitTELDAT-SW-STRUCTURE-MIB
1.3.6.1.4.1.2007.4.1.2.3telProdNpMonProtocolsTELDAT-SW-STRUCTURE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2007.4.1.2.3.7telProdNpMonProtDLSwTELDAT-MON-PROTOCOL-DLSw-MIB
1.3.6.1.4.1.2007.4.1.2.3.7.4telProdNpMonProtDLSwSessionsGroupTELDAT-MON-PROTOCOL-DLSw-MIB
1.3.6.1.4.1.2007.4.1.2.3.7.4.1telProdNpMonProtDLSwActSessTableTELDAT-MON-PROTOCOL-DLSw-MIB
1.3.6.1.4.1.2007.4.1.2.3.7.4.1.1telProdNpMonProtDLSwActSessEntryTELDAT-MON-PROTOCOL-DLSw-MIB
1.3.6.1.4.1.2007.4.1.2.3.7.4.1.1.6telProdNpMonProtDLSwActSessStateTELDAT-MON-PROTOCOL-DLSw-MIB