T11-IETF-IMSS-FC-VIRTUAL-FABRIC-MIB :: t11vfPortTaggingOperStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › T11-IETF-IMSS-FC-VIRTUAL-FABRIC-MIB › t11vfPortTaggingOperStatus

t11vfPortTaggingOperStatus

Module: T11-IETF-IMSS-FC-VIRTUAL-FABRIC-MIB

OID (symbolic): T11-IETF-IMSS-FC-VIRTUAL-FABRIC-MIB::t11vfPortTaggingOperStatus

OID (numeric): 1.3.6.1.2.1.0.1.3.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This object is used to report the operational status of  
Virtual Fabric tagging on this Port.  
     
SET operation   Description  
--------------  -------------------------------------------  

 
off(1)          Virtual Fabric tagging is disabled on this   
                Port.  
     
on(2)           Virtual Fabric tagging is enabled on this
                Port.

What is t11vfPortTaggingOperStatus?

This read-only value reports the actual operational status of Virtual Fabric tagging on the port, off or on, regardless of what the admin status requests. Comparing this against t11vfPortTaggingAdminStatus lets an admin see whether an auto or on admin setting actually succeeded in negotiating tagging with the attached peer port. For example, if t11vfPortTaggingAdminStatus is set to auto(3) but t11vfPortTaggingOperStatus reads off(1), the admin knows the peer port did not request Virtual Fabric tagging.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.0.1.3.1.3
snmpwalk -v2c -c public <target> T11-IETF-IMSS-FC-VIRTUAL-FABRIC-MIB::t11vfPortTaggingOperStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.0.1.3.1.3.1
snmpget -v2c -c public <target> T11-IETF-IMSS-FC-VIRTUAL-FABRIC-MIB::t11vfPortTaggingOperStatus.1

Start monitoring vendor-neutral, standards-based (T11/IETF) MIB, Fibre Channel switches supporting Virtual Fabrics (virtual-fabric partitioning status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the T11-IETF-IMSS-FC-VIRTUAL-FABRIC-MIB::t11vfPortTaggingOperStatus OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based (T11/IETF) MIB, Fibre Channel switches supporting Virtual Fabrics (virtual-fabric partitioning status) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.0dhcpDHCP-V4-RELAY-MIB
1.3.6.1.2.1.0.1inetMRouteMIBObjectsINETMROUTE-STD-MIB
1.3.6.1.2.1.0.1.3medGwyConnectionsMEGACO-MIB
1.3.6.1.2.1.0.1.3.1medGwyTermIdTableMEGACO-MIB
Numeric OIDNameModule
1.3.6.1.2.1.0.1.3.1.3t11vfPortTaggingOperStatusT11-IETF-IMSS-FC-VIRTUAL-FABRIC-MIB