All MIBs › T11-IETF-IMSS-FC-VIRTUAL-FABRIC-MIB › t11vfPortTaggingAdminStatus
t11vfPortTaggingAdminStatus
Module: T11-IETF-IMSS-FC-VIRTUAL-FABRIC-MIB
OID (symbolic): T11-IETF-IMSS-FC-VIRTUAL-FABRIC-MIB::t11vfPortTaggingAdminStatus
OID (numeric): 1.3.6.1.2.1.0.1.3.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to configure the administrative status
of Virtual Fabric tagging on this Port.
SET operation Description
-------------- -------------------------------------------
off(1) To disable Virtual Fabric tagging on this
Port.
on(2) To enable Virtual Fabric tagging on this
Port if the attached Port doesn't
prohibit it.
auto(3) To enable Virtual Fabric tagging if the
peer requests it. What is t11vfPortTaggingAdminStatus?
This read-write value configures the administrative status of Virtual Fabric tagging on a port: off disables it, on enables it if the peer allows, and auto enables it only if the peer requests it. An admin sets this to control whether frames on this port carry an explicit Virtual Fabric tag, which matters when a port trunks traffic for multiple Virtual Fabrics to a neighboring switch rather than carrying just its single default VF_ID. For example, an admin connecting two switches over an inter-switch link carrying multiple Virtual Fabrics would set t11vfPortTaggingAdminStatus to on(2) on that port to force VF tagging.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.0.1.3.1.2 snmpwalk -v2c -c public <target> T11-IETF-IMSS-FC-VIRTUAL-FABRIC-MIB::t11vfPortTaggingAdminStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.0.1.3.1.2.1 snmpget -v2c -c public <target> T11-IETF-IMSS-FC-VIRTUAL-FABRIC-MIB::t11vfPortTaggingAdminStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.0.1.3.1.2.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> t11vfPortTaggingAdminStatus.1
Start monitoring vendor-neutral, standards-based (T11/IETF) MIB, Fibre Channel switches supporting Virtual Fabrics (virtual-fabric partitioning status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the T11-IETF-IMSS-FC-VIRTUAL-FABRIC-MIB::t11vfPortTaggingAdminStatus OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based (T11/IETF) MIB, Fibre Channel switches supporting Virtual Fabrics (virtual-fabric partitioning status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.0 | dhcp | DHCP-V4-RELAY-MIB |
| 1.3.6.1.2.1.0.1 | inetMRouteMIBObjects | INETMROUTE-STD-MIB |
| 1.3.6.1.2.1.0.1.3 | medGwyConnections | MEGACO-MIB |
| 1.3.6.1.2.1.0.1.3.1 | medGwyTermIdTable | MEGACO-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.0.1.3.1.2 | t11vfPortTaggingAdminStatus | T11-IETF-IMSS-FC-VIRTUAL-FABRIC-MIB |