All MIBs › T11-FC-FABRIC-LOCK-MIB › t11FLockInitiatorType
t11FLockInitiatorType
Module: T11-FC-FABRIC-LOCK-MIB
OID (symbolic): T11-FC-FABRIC-LOCK-MIB::t11FLockInitiatorType
OID (numeric): 1.3.6.1.2.1.159.1.1.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object specifies what type of initiator generated the request that caused this lock to be established:
other - none of the following.
ssb - this lock was established due to the receipt of an SSB, e.g., from a GS-5 client. cli - this lock was established in order to process a Command Line Interface (CLI) command. snmp - this lock was established as a result of an SNMP SetRequest.
What is t11FLockInitiatorType?
This value identifies what type of client initiated the request that established this Fibre Channel fabric lock: other, ssb (a GS-5 client's Server Session Begin), cli (a Command Line Interface command), or snmp (an SNMP SetRequest). Admins use it to understand what triggered a currently held fabric lock, useful when investigating why fabric-wide configuration changes seem blocked. A value of cli would tell the admin someone is holding the lock via a switch's command-line session rather than through SNMP or a GS-5 management client.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.159.1.1.1.1.3 snmpwalk -v2c -c public <target> T11-FC-FABRIC-LOCK-MIB::t11FLockInitiatorType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.159.1.1.1.1.3.1 snmpget -v2c -c public <target> T11-FC-FABRIC-LOCK-MIB::t11FLockInitiatorType.1
Start monitoring Fibre Channel SAN switches/fabrics, vendor-neutral standards-based MIB (fabric-lock contention/rejection status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the T11-FC-FABRIC-LOCK-MIB::t11FLockInitiatorType OID value, configure state conditions and alerts, and monitor any Fibre Channel SAN switches/fabrics, vendor-neutral standards-based MIB (fabric-lock contention/rejection status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.159 | t11FabricLockMIB | T11-FC-FABRIC-LOCK-MIB |
| 1.3.6.1.2.1.159.1 | t11FLockMIBObjects | T11-FC-FABRIC-LOCK-MIB |
| 1.3.6.1.2.1.159.1.1 | t11FLockConfiguration | T11-FC-FABRIC-LOCK-MIB |
| 1.3.6.1.2.1.159.1.1.1 | t11FLockTable | T11-FC-FABRIC-LOCK-MIB |
| 1.3.6.1.2.1.159.1.1.1.1 | t11FLockEntry | T11-FC-FABRIC-LOCK-MIB |
| 1.3.6.1.2.1.159.1.1.1.1.3 | t11FLockInitiatorType | T11-FC-FABRIC-LOCK-MIB |