All MIBs › SYMMGNSS › gnssConfigurationTrackMode
gnssConfigurationTrackMode
Module: SYMMGNSS
OID (symbolic): SYMMGNSS::gnssConfigurationTrackMode
OID (numeric): 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.3
Node type: OBJECT-TYPE
Type: GNSSReceiverMode
Access: read-write
Description: GNSS receiver mode. This depends on the GNSS receiver. For the VCOM receiver, there are four modes: beidou (1), gps (2), priorityBeidou (4), which is automatic with GPS priority, and priorityGps (5) which is automatic with Beidou priority. For Ublox receiver, gnssGPS(17),gnssGlonass(18),gnssGPSGlonass(19),gnssGalileo(20), gnssGPSGalileo(21),gnssGlonassGalileo(22),gnssGPSGlonassGalileo(23), gnssBeidou(24), gnssBeidouGPS(25), gnssBeidouGlonass(26), gnssBeidouGlonassGPS(27),gnssBeidouGalileo(28), gnssBeidouGalileoGPS(29), gnssBeidouGalileoGlonass(30), gnssBeidouGalileoGlonassGPS(31)
What is gnssConfigurationTrackMode?
Selects which satellite constellation(s) this GNSS port's receiver tracks; the exact enumeration depends on the receiver chip — a VCOM receiver offers beidou/gps/priority-BeiDou/priority-GPS modes, while a u-blox receiver offers a much larger set of single- and multi-constellation combinations (GPS, GLONASS, Galileo, BeiDou, and their combinations). An admin sets this to match which GNSS constellations the antenna/receiver hardware and deployment region actually support.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.3 snmpwalk -v2c -c public <target> SYMMGNSS::gnssConfigurationTrackMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.3.1 snmpget -v2c -c public <target> SYMMGNSS::gnssConfigurationTrackMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.3.1 s <value>
Start monitoring Symmetricom (Microchip/Microsemi) GNSS/GPS timing receiver, network timing appliance (satellite-fix/position status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYMMGNSS::gnssConfigurationTrackMode OID value, configure state conditions and alerts, and monitor any Symmetricom (Microchip/Microsemi) GNSS/GPS timing receiver, network timing appliance (satellite-fix/position status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9070 | symmetricom | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1 | symmNetworkManagement | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2 | symmSnmpManagement | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2.5 | symmCommonModelV1 | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2.5.2 | symmPhysicalSignal | SYMM-COMMON-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9070.1.2.5.2.1 | symmGNSS | SYMMGNSS |
| 1.3.6.1.4.1.9070.1.2.5.2.1.2 | gnssConfig | SYMMGNSS |
| 1.3.6.1.4.1.9070.1.2.5.2.1.2.1 | gnssConfigurationTable | SYMMGNSS |
| 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1 | gnssConfigurationEntry | SYMMGNSS |
| 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.3 | gnssConfigurationTrackMode | SYMMGNSS |