-- -- SYMMGNSS.my -- MIB generated by MG-SOFT Visual MIB Builder 2013 (64-bit) Version 9.0 Build 760 -- Thursday, May 05, 2016 at 00:20:23 -- -- SYMMGNSS.my -- MIB generated by MG-SOFT Visual MIB Builder Version 7.0 Build 209 -- Monday, July 18, 2011 at 12:44:25 -- -- SYMMGNSS.my -- MIB generated by MG-SOFT Visual MIB Builder Version 7.0 Build 209 -- Thursday, June 30, 2011 at 09:37:09 -- -- SYMMCOMMONGNSS.my -- MIB generated by MG-SOFT Visual MIB Builder Version 7.0 Build 209 -- Thursday, February 17, 2011 at 13:59:00 -- SYMMGNSS DEFINITIONS ::= BEGIN IMPORTS entPhysicalIndex FROM ENTITY-MIB ifNumber, ifIndex FROM IF-MIB OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF Integer32, OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY FROM SNMPv2-SMI DisplayString, TEXTUAL-CONVENTION FROM SNMPv2-TC symmPhysicalSignal, YESVALUETYPE, GNSSHealthStatus, GNSSReceiverMode, GNSSPositionMode FROM SYMM-COMMON-SMI; -- 1.3.6.1.4.1.9070.1.2.5.2.1 -- Feb. 01, 2011 at 00:00 GMT -- -- 1.3.6.1.4.1.9070.1.2.5.2.1 -- February 01, 2011 at 00:00 GMT -- 1.3.6.1.4.1.9070.1.2.5.2.1 symmGNSS MODULE-IDENTITY LAST-UPDATED "201808230822Z" -- August, 2018 at 08:22 GMT ORGANIZATION "Symmetricom" CONTACT-INFO " Symmetricom Technical Support 1-888-367-7966 toll free USA 1-408-428-7907 worldwide Support@symmetricom.com " DESCRIPTION "This is the Symmetricom common MIB for GNSS/GPS. This MIB has two main nodes: gnssStatus and gnssConfig. The gnssStatus node has a port status table, a satellite table, and a scalar for GNSS current position mode. The gnssConfig node has a configuration table, position setting table, and a present position table." ::= { symmPhysicalSignal 1 } -- -- Type definitions -- -- Type definitions -- GNSSCURPOSITIONMODE ::= INTEGER { surveying(1), positionHold(2), manual(3) } -- -- Textual conventions -- -- Textual conventions -- -- Textual conventions -- -- Textual conventions -- -- Textual conventions -- -- Textual conventions -- DateAndTime ::= TEXTUAL-CONVENTION DISPLAY-HINT "2d-1d-1d,1d:1d:1d.1d,1a1d:1d" STATUS current DESCRIPTION "A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC* 0..13 10 11 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - daylight saving time in New Zealand is +13 For example, Tuesday May 26, 1992 at 1:30:15 PM EDT would be displayed as: 1992-5-26,13:30:15.0,-4:0 Note that if only local time is known, then timezone information (fields 8-10) is not present." SYNTAX OCTET STRING (SIZE (8 | 11)) TLatAndLon ::= TEXTUAL-CONVENTION DISPLAY-HINT "1a1d:1d:1d.1d" STATUS current DESCRIPTION "antenna latitude and longitude specification. field octets contents range ----- ------ -------- ----- 1 1 +/-180 deg '+' / '-' 2 2 degree 0..180 3 3 minute 0..59 4 4 second 0..59 5 5 second fraction 0..99 +/- dd:mm:ss.ss " SYNTAX OCTET STRING (SIZE (5)) TAntHeight ::= TEXTUAL-CONVENTION DISPLAY-HINT "1a2d.1d" STATUS current DESCRIPTION "antenna height specification. field octets contents range ----- ------ -------- ----- 1 1 +/- '+' / '-' 2 2-3 meter 0..10000 3 4 meter fraction 0..99 +/- hh.hh " SYNTAX OCTET STRING (SIZE (4)) TLocalTimeOffset ::= TEXTUAL-CONVENTION DISPLAY-HINT "1a1d:1d" STATUS current DESCRIPTION "A local time offset specification. field octets contents range ----- ------ -------- ----- 1 1 direction from UTC '+' / '-' 2 2 hours from UTC* 0..13 3 3 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - The hours range is 0..13 For example, the -6 local time offset would be displayed as: -6:0 " SYNTAX OCTET STRING (SIZE (3)) TSsm ::= TEXTUAL-CONVENTION DISPLAY-HINT "x" STATUS current DESCRIPTION "The ssm hex code" SYNTAX INTEGER (0..255) -- -- Node definitions -- -- Node definitions -- -- 1.3.6.1.4.1.9070.1.2.5.2.1.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1 gnssStatus OBJECT IDENTIFIER ::= { symmGNSS 1 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.1 gnssPortStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF GnssPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "GNSS port status table. It contains port name and the current GNSS receiver mode for the specified port." ::= { gnssStatus 1 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1 gnssPortStatusEntry OBJECT-TYPE SYNTAX GnssPortStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the GNSS port status table. Table index is ifIndex." INDEX { ifIndex, gnssPortStatusIndex } ::= { gnssPortStatusTable 1 } GnssPortStatusEntry ::= SEQUENCE { gnssPortStatusIndex Integer32, gnssPortStatusPortName DisplayString, gnssPortCurrentGNSS YESVALUETYPE, gnssPortCurrentPosMode GNSSCURPOSITIONMODE } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1.1 gnssPortStatusIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Local index of the GNSS port status table." ::= { gnssPortStatusEntry 1 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1.2 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1.2 gnssPortStatusPortName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the specified GNSS port. In TP5000 system there can be one or two GNSS ports. One of them is always called GPS, and the additional one (if present) is either called GPS or GNSS. A port called GNSS indicates that it may be non-GPS or a multi-mode GNSS receiver port." ::= { gnssPortStatusEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1.2 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1.3 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1.3 gnssPortCurrentGNSS OBJECT-TYPE SYNTAX YESVALUETYPE MAX-ACCESS read-only STATUS current DESCRIPTION "This value indicates whether the specified GNSS port is used. Its value is Yes (1) or No (2). If it is No, the port is considered absent in the system." ::= { gnssPortStatusEntry 3 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1.4 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1.4 gnssPortCurrentPosMode OBJECT-TYPE SYNTAX GNSSCURPOSITIONMODE MAX-ACCESS read-only STATUS current DESCRIPTION "Current position mode of the GNSS receiver. It can be surveying (1), position hold (2), or manual (3)" ::= { gnssPortStatusEntry 4 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.3 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2 gnssSatTable OBJECT-TYPE SYNTAX SEQUENCE OF GnssSatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "GNSS satellite table. This table lists information about the satellites being tracked by the GNSS receiver." ::= { gnssStatus 2 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1 gnssSatEntry OBJECT-TYPE SYNTAX GnssSatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the GNSS satellite tracking table. Table index is local index gnssSatIndex." INDEX { ifIndex, gnssSatIndex } ::= { gnssSatTable 1 } GnssSatEntry ::= SEQUENCE { gnssSatIndex Integer32, gnssSatNum INTEGER, gnssSatSNR INTEGER, gnssSatHealth GNSSHealthStatus, gnssSatAzimuth INTEGER, gnssSatElevation INTEGER, gnssSatPortName DisplayString } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.1 gnssSatIndex OBJECT-TYPE SYNTAX Integer32 (1..125) MAX-ACCESS read-only STATUS current DESCRIPTION "This is the local index of the table of the GNSS satellites GPS, GLONASS, Galileo being tracked." ::= { gnssSatEntry 1 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1.2 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.2 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.2 gnssSatNum OBJECT-TYPE SYNTAX INTEGER (1..50) MAX-ACCESS read-only STATUS current DESCRIPTION "GNSS satellite number. This is the identification number of the GNSS satellite being tracked. This information is obtained from the GNSS satellite ephemeris or almanac." ::= { gnssSatEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1.3 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.3 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.3 gnssSatSNR OBJECT-TYPE SYNTAX INTEGER (0..50) MAX-ACCESS read-only STATUS current DESCRIPTION "Signal-to-Noise Ratio. This is the GNSS signal to noise ratio measured by the GNSS receiver." ::= { gnssSatEntry 3 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1.4 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.4 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.4 gnssSatHealth OBJECT-TYPE SYNTAX GNSSHealthStatus MAX-ACCESS read-only STATUS current DESCRIPTION "GNSS satellite health state. It can be healthy (1) or unhealthy (2). This data is obtained from the GNSS receiver." ::= { gnssSatEntry 4 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1.5 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.5 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.5 gnssSatAzimuth OBJECT-TYPE SYNTAX INTEGER (0..360) UNITS "degrees" MAX-ACCESS read-only STATUS current DESCRIPTION "GNSS satellite azimuthal angle clockwise from true north. Range of the azimuth is 0 to 360 degrees." ::= { gnssSatEntry 5 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1.6 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.6 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.6 gnssSatElevation OBJECT-TYPE SYNTAX INTEGER (0..360) UNITS "degrees" MAX-ACCESS read-only STATUS current DESCRIPTION "GNSS satellite elevation angle relative to the horizon. Range of the elevation angle is 0 to 90 degrees." ::= { gnssSatEntry 6 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.7 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.7 gnssSatPortName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The gnss port name. This is defined in gnssConfigTable." ::= { gnssSatEntry 7 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.5 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.3 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.3 gnssPresentPosTable OBJECT-TYPE SYNTAX SEQUENCE OF GnssPresentPosEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Current position table. This table shows the position of the GNSS receiver antenna. In the automatic mode, the position is calculated by the GNSS receiver. In the manual mode, the position is the manually entered position in gnssPosSettingTable." ::= { gnssStatus 3 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.5.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1 gnssPresentPosEntry OBJECT-TYPE SYNTAX GnssPresentPosEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the current position table. Table index is the ifIndex. " INDEX { ifIndex, gnssPresentPosIndex } ::= { gnssPresentPosTable 1 } GnssPresentPosEntry ::= SEQUENCE { gnssPresentPosIndex Integer32, gnssPresentPosLat DisplayString, gnssPresentPosLong DisplayString, gnssPresentPosHeight DisplayString } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1.1 gnssPresentPosIndex OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Local index that corresponds to the ifIndex. For TP5K there are up to two GNSS port entries." ::= { gnssPresentPosEntry 1 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.5.1.2 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1.2 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1.2 gnssPresentPosLat OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Latitude of the GNSS receiver antenna position for the specified GNSS port. Its format is Ndd:mm:ss.ss or Sdd:mm:ss.ss. " ::= { gnssPresentPosEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.5.1.3 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1.3 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1.3 gnssPresentPosLong OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Longitude of the GNSS receiver antenna position for the specified GNSS port. Its format is Eddd:mm:ss.ss or Wddd:mm:ss.ss. " ::= { gnssPresentPosEntry 3 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.5.1.4 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1.4 -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1.4 gnssPresentPosHeight OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Altitude (height) in meters of the GNSS receiver antenna position for the specified GNSS port. Its format is +/-hhhh.h." ::= { gnssPresentPosEntry 4 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.2 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2 gnssConfig OBJECT IDENTIFIER ::= { symmGNSS 2 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.1 gnssConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF GnssConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The GNSS configuration table." ::= { gnssConfig 1 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1 gnssConfigurationEntry OBJECT-TYPE SYNTAX GnssConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the GNSS configuration table. Table index is ifIndex." INDEX { ifIndex, gnssConfigurationIndex } ::= { gnssConfigurationTable 1 } GnssConfigurationEntry ::= SEQUENCE { gnssConfigurationIndex Integer32, gnssConfigurationPortName DisplayString, gnssConfigurationTrackMode GNSSReceiverMode, gnssConfigurationPosMode GNSSPositionMode, gnssConfigurationElevMask Integer32, gnssConfigurationCableDelay Integer32, gnssConfigurationLeapSeconds Integer32 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.1 gnssConfigurationIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Local index of the GNSS port configuration table." ::= { gnssConfigurationEntry 1 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.2 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.2 gnssConfigurationPortName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the specified GNSS port. For TP5000 currently there are two names for a GNSS port: GPS or GNSS. Use the name on the equipment front panel." ::= { gnssConfigurationEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.2 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.3 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.3 gnssConfigurationTrackMode OBJECT-TYPE SYNTAX GNSSReceiverMode MAX-ACCESS read-write STATUS current DESCRIPTION "GNSS receiver mode. This depends on the GNSS receiver. For the VCOM receiver, there are four modes: beidou (1), gps (2), priorityBeidou (4), which is automatic with GPS priority, and priorityGps (5) which is automatic with Beidou priority. For Ublox receiver, gnssGPS(17),gnssGlonass(18),gnssGPSGlonass(19),gnssGalileo(20), gnssGPSGalileo(21),gnssGlonassGalileo(22),gnssGPSGlonassGalileo(23), gnssBeidou(24), gnssBeidouGPS(25), gnssBeidouGlonass(26), gnssBeidouGlonassGPS(27),gnssBeidouGalileo(28), gnssBeidouGalileoGPS(29), gnssBeidouGalileoGlonass(30), gnssBeidouGalileoGlonassGPS(31) " ::= { gnssConfigurationEntry 3 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.3 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.4 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.4 gnssConfigurationPosMode OBJECT-TYPE SYNTAX GNSSPositionMode MAX-ACCESS read-write STATUS current DESCRIPTION "GNSS receiver position survey mode. It can be either automatic (1) or manual (2). When the position survey mode is manual, the user must configure the position. " ::= { gnssConfigurationEntry 4 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.4 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.5 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.5 gnssConfigurationElevMask OBJECT-TYPE SYNTAX Integer32 (5..45) MAX-ACCESS read-write STATUS current DESCRIPTION "GNSS elevation mask. The range is 5 to 45 degrees. This value is actually the lower limit of the elevation mask. The upper limit is 90 degrees. If the elevation mask is set to 5 degrees, the elevation coverage is from 5 to 90 degrees. If the elevation mask is set to 30 degrees, the elevation coverage is from 30 to 90 degrees." ::= { gnssConfigurationEntry 5 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.5 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.6 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.6 gnssConfigurationCableDelay OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "GNSS antenna cable delay compensation in nanoseconds. Range is 0 to 999,999 nanoseconds. This value should be as close to the actual antenna cable delay as possible. Residual error will directly affect the time/phase accuracy." ::= { gnssConfigurationEntry 6 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.7 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.7 gnssConfigurationLeapSeconds OBJECT-TYPE SYNTAX Integer32 (20..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Leapseconds used for GLONASS only satellite to set user-provided value. Range 20-255. This leapseconds not applicable for GPS port. Note: zero (0) indicates NotApplicable" ::= { gnssConfigurationEntry 7 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.4 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.2 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.2 gnssPosSettingTable OBJECT-TYPE SYNTAX SEQUENCE OF GnssPosSettingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to manually set the GNSS receiver antenna position for the specified GNSS port." ::= { gnssConfig 2 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.4.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.2.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.2.1 gnssPosSettingEntry OBJECT-TYPE SYNTAX GnssPosSettingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of the GNSS position setting table. Table index is ifIndex." INDEX { ifIndex, gnssPosSettingIndex } ::= { gnssPosSettingTable 1 } GnssPosSettingEntry ::= SEQUENCE { gnssPosSettingIndex Integer32, gnssPosSettingLat DisplayString, gnssPosSettingLong DisplayString, gnssPosSettingHeight DisplayString } -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.2.1.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.2.1.1 gnssPosSettingIndex OBJECT-TYPE SYNTAX Integer32 (1..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Local index that corresponds to the ifIndex. For TP5K there are up to two GNSS port entries." ::= { gnssPosSettingEntry 1 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.4.1.2 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.2.1.2 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.2.1.2 gnssPosSettingLat OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Manual setting for the latitude of the GNSS receiver antenna for the specified GNSS port." ::= { gnssPosSettingEntry 2 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.4.1.3 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.2.1.3 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.2.1.3 gnssPosSettingLong OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Manual setting for the longitude of the GNSS receiver antenna for the specified GNSS port." ::= { gnssPosSettingEntry 3 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.1.4.1.4 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.2.1.4 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.2.1.4 gnssPosSettingHeight OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Manual setting for the height of the GNSS receiver antenna for the specified GNSS port." ::= { gnssPosSettingEntry 4 } -- 1.3.6.1.4.1.9070.1.2.4.8.1.6 -- 1.3.6.1.4.1.9070.1.2.4.6.1.1.6 -- 1.3.6.1.4.1.9070.1.2.4.6.1.1.6 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2 -- 1.3.6.1.4.1.9070.1.2.5.2.1.3 -- 1.3.6.1.4.1.9070.1.2.5.2.1.3 gnssConformance OBJECT-IDENTITY STATUS current DESCRIPTION "This subtree contains conformance statements for the SYMMETRICOM-LED-MIB module. " ::= { symmGNSS 3 } -- 1.3.6.1.4.1.9070.1.2.4.8.1.6.1 -- 1.3.6.1.4.1.9070.1.2.4.6.1.1.6.1 -- 1.3.6.1.4.1.9070.1.2.4.6.1.1.6.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.3.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.3.1 gnssCompliances OBJECT IDENTIFIER ::= { gnssConformance 1 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.3.1.1 -- this module -- 1.3.6.1.4.1.9070.1.2.5.2.1.3.1.1 gnssBasicCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which have GNSS input." MODULE -- this module MANDATORY-GROUPS { gnssStatusGroup, gnssConfigGroup, gnssSVGroup, gnssConfigPosGroup, gnssCurrentPosGroup } ::= { gnssCompliances 1 } -- 1.3.6.1.4.1.9070.1.2.4.8.1.6.2 -- 1.3.6.1.4.1.9070.1.2.4.6.1.1.6.2 -- 1.3.6.1.4.1.9070.1.2.4.6.1.1.6.2 -- 1.3.6.1.4.1.9070.1.2.5.2.1.2.2 -- 1.3.6.1.4.1.9070.1.2.5.2.1.3.2 -- 1.3.6.1.4.1.9070.1.2.5.2.1.3.2 gnssUocGroups OBJECT IDENTIFIER ::= { gnssConformance 2 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.3.2.1 -- 1.3.6.1.4.1.9070.1.2.5.2.1.3.2.1 gnssStatusGroup OBJECT-GROUP OBJECTS { gnssPortStatusPortName, gnssPortCurrentGNSS, gnssPortCurrentPosMode } STATUS current DESCRIPTION "A collection of objects providing information applicable to GNSS status group." ::= { gnssUocGroups 1 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.3.2.2 -- 1.3.6.1.4.1.9070.1.2.5.2.1.3.2.2 gnssConfigGroup OBJECT-GROUP OBJECTS { gnssConfigurationPortName, gnssConfigurationTrackMode, gnssConfigurationPosMode, gnssConfigurationElevMask, gnssConfigurationCableDelay, gnssConfigurationLeapSeconds } STATUS current DESCRIPTION "A collection of objects providing information applicable to GNSS configuration group." ::= { gnssUocGroups 2 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.3.2.3 -- 1.3.6.1.4.1.9070.1.2.5.2.1.3.2.3 gnssSVGroup OBJECT-GROUP OBJECTS { gnssSatIndex, gnssSatNum, gnssSatSNR, gnssSatHealth, gnssSatAzimuth, gnssSatElevation, gnssSatPortName } STATUS current DESCRIPTION "A collection of objects providing information applicable to GNSS satellite positions group." ::= { gnssUocGroups 3 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.3.2.4 -- 1.3.6.1.4.1.9070.1.2.5.2.1.3.2.4 gnssConfigPosGroup OBJECT-GROUP OBJECTS { gnssPosSettingLat, gnssPosSettingLong, gnssPosSettingHeight } STATUS current DESCRIPTION "A collection of objects providing information applicable to GNSS position configuration group." ::= { gnssUocGroups 4 } -- 1.3.6.1.4.1.9070.1.2.5.2.1.3.2.5 -- 1.3.6.1.4.1.9070.1.2.5.2.1.3.2.5 gnssCurrentPosGroup OBJECT-GROUP OBJECTS { gnssPresentPosLat, gnssPresentPosLong, gnssPresentPosHeight } STATUS current DESCRIPTION "A collection of objects providing information applicable to GNSS current position group." ::= { gnssUocGroups 5 } END -- -- SYMMGNSS.my --