All MIBs › SWITCH-SYSTEM-MIB › rcPortDuplexSpeedSet
rcPortDuplexSpeedSet
Module: SWITCH-SYSTEM-MIB
OID (symbolic): SWITCH-SYSTEM-MIB::rcPortDuplexSpeedSet
OID (numeric): 1.3.6.1.4.1.8886.6.1.1.4.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
The desired speed and duplex for this interface. If the selected control is not possible on the interface, a value of illegal(99) is returned. If the port type does NOT support the default of autonegotiate(1), then the application initializes the port to a valid value (e.g., 1000full(6)). Note that not all controls are possible for all interfaces. For example, only full-1000(6) is available for Gigabit Ethernet interfaces.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.1.4.1.1.7 snmpwalk -v2c -c public <target> SWITCH-SYSTEM-MIB::rcPortDuplexSpeedSet
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.1.4.1.1.7.1 snmpget -v2c -c public <target> SWITCH-SYSTEM-MIB::rcPortDuplexSpeedSet.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.8886.6.1.1.4.1.1.7.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6 | iscomSeries | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6.1 | iscomSwitch | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6.1.1 | rcSystem | SWITCH-SYSTEM-MIB |
| 1.3.6.1.4.1.8886.6.1.1.4 | rcPortInfoConfig | SWITCH-SYSTEM-MIB |
| 1.3.6.1.4.1.8886.6.1.1.4.1 | rcPortTable | SWITCH-SYSTEM-MIB |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1 | rcPortEntry | SWITCH-SYSTEM-MIB |
| 1.3.6.1.4.1.8886.6.1.1.4.1.1.7 | rcPortDuplexSpeedSet | SWITCH-SYSTEM-MIB |