All MIBs › SWITCH-RATELIMIT-MIB › rcRateLimitDscpVlanPortHistoryHistoryIntervalStat
rcRateLimitDscpVlanPortHistoryHistoryIntervalStat
Module: SWITCH-RATELIMIT-MIB
OID (symbolic): SWITCH-RATELIMIT-MIB::rcRateLimitDscpVlanPortHistoryHistoryIntervalStat
OID (numeric): 1.3.6.1.4.1.8886.6.1.2.15.1.4
Node type: OBJECT-TYPE
Type: TimeTicks
Access: read-only
Description: The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is started at that instant. Note that following this rule may require the probe to delay collecting the first sample of the history, as each sample must be of the same interval. Also note that the sample which is currently being collected is not accessible in this table until the end of its interval.
What is rcRateLimitDscpVlanPortHistoryHistoryIntervalStat?
Read-only TimeTicks giving sysUpTime at the start of the interval this DSCP-scoped sample was collected over, the DSCP-history counterpart to rcRateLimitVlanPortHistoryHistoryIntervalStart. It timestamps each historical sample so counts can be plotted against actual time.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.2.15.1.4 snmpwalk -v2c -c public <target> SWITCH-RATELIMIT-MIB::rcRateLimitDscpVlanPortHistoryHistoryIntervalStat
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.2.15.1.4.1 snmpget -v2c -c public <target> SWITCH-RATELIMIT-MIB::rcRateLimitDscpVlanPortHistoryHistoryIntervalStat.1
Start monitoring Raisecom carrier-access/aggregation switch (per-port ingress/egress rate-limit status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SWITCH-RATELIMIT-MIB::rcRateLimitDscpVlanPortHistoryHistoryIntervalStat OID value, configure state conditions and alerts, and monitor any Raisecom carrier-access/aggregation switch (per-port ingress/egress rate-limit status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8886 | raisecom | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6 | iscomSeries | RAISECOM-BASE-MIB |
| 1.3.6.1.4.1.8886.6.1 | iscomSwitch | RAISECOM-BASE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8886.6.1.2 | rcRateLimit | SWITCH-RATELIMIT-MIB |
| 1.3.6.1.4.1.8886.6.1.2.15 | rcRateLimitDscpVlanPortHistoryTable | SWITCH-RATELIMIT-MIB |
| 1.3.6.1.4.1.8886.6.1.2.15.1 | rcRateLimitDscpVlanPortHistoryEntry | SWITCH-RATELIMIT-MIB |
| 1.3.6.1.4.1.8886.6.1.2.15.1.4 | rcRateLimitDscpVlanPortHistoryHistoryIntervalStat | SWITCH-RATELIMIT-MIB |