All MIBs › SW-PROJECTX-SRPRIMGMT-MIB
Category: Vendor-Specific Device Management
Description:
Manages Project-X SRP primary management objects and device configuration.
Imported Objects
From DLINK-ID-REC-MIB
| dlink-mgmt | |
| dlink-products |
From SNMPv2-SMI
| MODULE-IDENTITY |
What Is SW-PROJECTX-SRPRIMGMT-MIB?
SW-PROJECTX-SRPRIMGMT-MIB is a vendor MIB (internally code-named "Project-X") for managing SRP (likely Spatial Reuse Protocol or a similar ring-based technology) primary management objects on a networking device, covering configuration for that SRP-related subsystem. Given the sparse source information, its category appears to be network protocol/interface configuration management rather than general chassis health. Without concrete sample objects it is not possible to confirm specific hardware/software status objects such as uptime, temperature, or CPU load, but the naming suggests it exposes SRP ring/primary-management configuration state; any related fault/status counters would be part of the same module family, and the exact SW-PROJECTX-SRPRIMGMT-MIB OID assignments for these configuration objects cannot be confirmed from available metadata. It likely depends on standard SNMPv2-SMI conventions and possibly a base SRP/ring textual-conventions MIB, though this cannot be confirmed from the available metadata. It would be deployed on the vendor's SRP-capable ring/network device where the "Project-X" software identifies configuration and management state.
IPNetwork Monitor allows you to monitor SNMP objects defined in SW-PROJECTX-SRPRIMGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Project-X SRP-capable networking device (vendor/product not further identified)
Monitoring Examples
No sample objects or module description were provided for this MIB, so a concrete, grounded monitoring example cannot be constructed without inventing object names; based on the short description alone, it appears to manage SRP-related primary configuration state on the device.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| dlink_ProjectXSeriesProd | 1.3.6.1.4.1.171.10.59 | |||
| dlink_Dgs3224SRi | 1.3.6.1.4.1.171.10.59.1 | |||
| dlink_Dgs3224SR | 1.3.6.1.4.1.171.10.59.2 | |||
| dlink_Des3252SR | 1.3.6.1.4.1.171.10.59.3 | |||
| dlink_Dgs3324SRi | 1.3.6.1.4.1.171.10.59.4 | |||
| dlink_Dgs3324SR | 1.3.6.1.4.1.171.10.59.5 | |||
| dlink_Des3352SR | 1.3.6.1.4.1.171.10.59.6 | |||
| dlink_Dxs3326GSR | 1.3.6.1.4.1.171.10.59.7 | |||
| dlink_Dxs3350SR | 1.3.6.1.4.1.171.10.59.8 | |||
| dlink_Des6500SeriesProd | 1.3.6.1.4.1.171.10.61 | |||
| dlink_Des6500 | 1.3.6.1.4.1.171.10.61.1 | |||
| dgsProjectXSeriesProd | 1.3.6.1.4.1.171.11.59 | |||
| dgs3224SRi | 1.3.6.1.4.1.171.11.59.1 | |||
| dgs3224SR | 1.3.6.1.4.1.171.11.59.2 | |||
| des3252SR | 1.3.6.1.4.1.171.11.59.3 | |||
| dgs3324SRi | 1.3.6.1.4.1.171.11.59.4 | |||
| dgs3324SR | 1.3.6.1.4.1.171.11.59.5 | |||
| des3352SR | 1.3.6.1.4.1.171.11.59.6 | |||
| dxs3326GSR | 1.3.6.1.4.1.171.11.59.7 | |||
| dxs3350SR | 1.3.6.1.4.1.171.11.59.8 | |||
| des6500SeriesProd | 1.3.6.1.4.1.171.11.61 | |||
| des6500 | 1.3.6.1.4.1.171.11.61.1 |
RFC description
D-Link ProjectX Series management information for SR (Switch Router) devices, providing object identifiers for DGS and DES model configuration and monitoring.
Start monitoring Project-X SRP-capable networking device, vendor unidentified (SRP ring/primary-management config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.