STN-LOG-MIB

All MIBs › STN-LOG-MIB

Organization: Spring Tide Networks, Inc.

Last Updated: 2000-02-16

Category: Spring Tide Networks

Description: Manages Spring Tide Networks event log configuration, severity filtering, and log destination settings.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is STN-LOG-MIB?

STN-LOG-MIB is a proprietary Spring Tide Networks MIB for configuring the event logging subsystem on the vendor's IP services switch platform, covering log severity filtering and log destination settings. It exposes primarily configuration objects rather than the log messages themselves, letting an operator control what gets logged and where. Its monitoring relevance is indirect: verifying the logging configuration is correctly set (appropriate severity threshold, valid destination) ensures that subsequent fault/event traps and diagnostic messages are actually captured, which underpins broader software and hardware fault monitoring on the device. It likely complements the standard SNMPv2 notification framework and possibly syslog-style (RFC 3164) conventions for its destination settings. Typical deployment is on Spring Tide IP services switches where administrators need to confirm event logging is active and properly scoped before relying on it for fault diagnosis. Engineers can download the STN-LOG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in STN-LOG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Spring Tide Networks IP services switch

Monitoring Examples

No sample object or table names were provided in the source data for this module; based on the short description, a realistic use would be checking the configured log severity filter and destination objects to confirm critical/error-level events are being sent to the intended log server, since a misconfigured severity threshold could silently suppress important fault events.

What Can Be Monitored

log severity filter level
log destination configuration

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
TruthValue

From SPRING-TIDE-NETWORKS-SMI

stnNotification	OBJECT-IDENTITY
stnSystems	OBJECT-IDENTITY

From STN-CHASSIS-MIB

stnEngineCpu	OBJECT-TYPE
stnEngineIndex	OBJECT-TYPE
stnEngineSlot	OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
stnLog	1.3.6.1.4.1.3551.2.13			The MIB module that describes managed objects of Spring Tide Networks Event Logger.
stnLogObjects	1.3.6.1.4.1.3551.2.13.1
INT stnLogState	1.3.6.1.4.1.3551.2.13.1.1	INTEGER	read-only	Indicates whether the system logging is enabled.
I32 stnLogFlushTimer	1.3.6.1.4.1.3551.2.13.1.2	Integer32	read-only	The log flush time interval in seconds.
I32 stnLogMaxDisplay	1.3.6.1.4.1.3551.2.13.1.3	Integer32	read-only	The maximum number of rows in stnLogEventTable.
stnLogServerTable	1.3.6.1.4.1.3551.2.13.1.4		not-accessible	A list of flush servers for the Event Logger.
stnLogServerEntry	1.3.6.1.4.1.3551.2.13.1.4.1		not-accessible	Entry contains a particular log event.
I32 stnLogServerIndex	1.3.6.1.4.1.3551.2.13.1.4.1.1	Integer32	read-only	A sequence number that identifies a flush server.
INT stnLogServerType	1.3.6.1.4.1.3551.2.13.1.4.1.2	INTEGER	read-only	The type of this log server.
IP stnLogServerIpAddress	1.3.6.1.4.1.3551.2.13.1.4.1.3	IpAddress	read-only	The log server IP address if the type is Syslog or Network Management Application.
STR stnLogServerFacility	1.3.6.1.4.1.3551.2.13.1.4.1.4	DisplayString	read-only	The log server facility if the type is Syslog.
I32 stnLogServerFileSize	1.3.6.1.4.1.3551.2.13.1.4.1.5	Integer32	read-only	The maximum file size when the log is written to flash, 0 when other types.
stnLogFilterTable	1.3.6.1.4.1.3551.2.13.1.5		not-accessible	Log filter per MC on each engine.
stnLogFilterEntry	1.3.6.1.4.1.3551.2.13.1.5.1		not-accessible	Each entry contains a particular log filter for a modular component on an engine.
I32 stnLogFilterEngineId	1.3.6.1.4.1.3551.2.13.1.5.1.1	Integer32	read-only	The engine ID.
I32 stnLogFilterMcId	1.3.6.1.4.1.3551.2.13.1.5.1.2	Integer32	read-only	The modular component ID.
INT stnLogFilterPriority	1.3.6.1.4.1.3551.2.13.1.5.1.3	INTEGER	read-only	The priority filter level. 0 disable the log. This is now depricated
T/F stnLogFilterSeverityFatal	1.3.6.1.4.1.3551.2.13.1.5.1.4	TruthValue	read-only	Status of logging Fatal Events
T/F stnLogFilterSeverityError	1.3.6.1.4.1.3551.2.13.1.5.1.5	TruthValue	read-only	Status of logging Error Events
T/F stnLogFilterSeverityWarning	1.3.6.1.4.1.3551.2.13.1.5.1.6	TruthValue	read-only	Status of logging Warning Events
T/F stnLogFilterSeverityInfo	1.3.6.1.4.1.3551.2.13.1.5.1.7	TruthValue	read-only	Status of logging Info Events
T/F stnLogFilterSeverityTrace	1.3.6.1.4.1.3551.2.13.1.5.1.8	TruthValue	read-only	Status of logging Trace Events
T/F stnLogFilterSeverityDebug	1.3.6.1.4.1.3551.2.13.1.5.1.9	TruthValue	read-only	Status of logging Debug Events
stnLogEventTable	1.3.6.1.4.1.3551.2.13.1.6		not-accessible	A list of log entries.
stnLogEventEntry	1.3.6.1.4.1.3551.2.13.1.6.1		not-accessible	Entry contains a particular log event.
I32 stnLogEventIndex	1.3.6.1.4.1.3551.2.13.1.6.1.1	Integer32	read-only	A sequence number that identifies a log event.
I32 stnLogEventEngineId	1.3.6.1.4.1.3551.2.13.1.6.1.2	Integer32	read-only	The engine ID where this log event occured.
STR stnLogEventMcName	1.3.6.1.4.1.3551.2.13.1.6.1.3	DisplayString	read-only	The name of moduler component this log event is from.
INT stnLogEventPriority	1.3.6.1.4.1.3551.2.13.1.6.1.4	INTEGER	read-only	The priority of this log event.
STR stnLogEventTimeStamp	1.3.6.1.4.1.3551.2.13.1.6.1.5	DisplayString	read-only	The time stamp of this log event.
STR stnLogEventMessage	1.3.6.1.4.1.3551.2.13.1.6.1.6	DisplayString	read-only	The log message.
stnLogMibConformance	1.3.6.1.4.1.3551.2.13.2
NTF stnEventLogServerFailure	1.3.6.1.4.1.3551.2.100.0.24			A stnEventLogServerFailure trap signifies that the agent entity has detected that the device has lost contact to the external event log server. The generation of this trap can be controlled by the LogTraps configuration object.
NTF stnEventLogInternalFailure	1.3.6.1.4.1.3551.2.100.0.25			A stnEventLogInternalFailure trap signifies that the agent entity has detected an internal event log system failure. The generation of this trap can be controlled by the LogTraps configuration object.

RFC description

Spring Tide Networks event logger MIB managing system logging state, message delivery, and log configuration.

Start monitoring Spring Tide Networks (Lucent) IP services switch (event-logging config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download STN-LOG-MIB

What Is STN-LOG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description