All MIBs › SNAP-SWITCH-MIB › sk602xSysTftpIPAddress
sk602xSysTftpIPAddress
Module: SNAP-SWITCH-MIB
OID (symbolic): SNAP-SWITCH-MIB::sk602xSysTftpIPAddress
OID (numeric): 1.3.6.1.4.1.179.2.2.1.2
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: TFTP Server IP address.
What is sk602xSysTftpIPAddress?
The IP address of the TFTP server the switch uses for firmware or configuration file transfers, paired with sk602xSysTftpFilename to identify what gets pulled during an upgrade.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.179.2.2.1.2 snmpwalk -v2c -c public <target> SNAP-SWITCH-MIB::sk602xSysTftpIPAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.179.2.2.1.2.1 snmpget -v2c -c public <target> SNAP-SWITCH-MIB::sk602xSysTftpIPAddress.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.179.2.2.1.2.1 a <value>
Start monitoring SysKonnect SnapSwitch 6020 FDDI switch (port link/duplex status, power-up counter) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNAP-SWITCH-MIB::sk602xSysTftpIPAddress OID value, configure state conditions and alerts, and monitor any SysKonnect SnapSwitch 6020 FDDI switch (port link/duplex status, power-up counter) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.179 | sk | SK-CONC-MIB |
| 1.3.6.1.4.1.179.2 | skMibs | SK-CONC-MIB |
| 1.3.6.1.4.1.179.2.2 | sk_board | SK-UPPS-MIB |
| 1.3.6.1.4.1.179.2.2.1 | sk_board_status | SK-UPPS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.179.2.2.1.2 | sk602xSysTftpIPAddress | SNAP-SWITCH-MIB |