All MIBs › SNAP-SWITCH-MIB › sk602xSwitchSubnetMask
sk602xSwitchSubnetMask
Module: SNAP-SWITCH-MIB
OID (symbolic): SNAP-SWITCH-MIB::sk602xSwitchSubnetMask
OID (numeric): 1.3.6.1.4.1.179.2.2.3.2
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: The switch's submask.
What is sk602xSwitchSubnetMask?
The subnet mask paired with the switch's management IP address, needed to interpret sk602xSwitchIPAddress correctly.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.179.2.2.3.2 snmpwalk -v2c -c public <target> SNAP-SWITCH-MIB::sk602xSwitchSubnetMask
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.179.2.2.3.2.1 snmpget -v2c -c public <target> SNAP-SWITCH-MIB::sk602xSwitchSubnetMask.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.179.2.2.3.2.1 a <value>
Start monitoring SysKonnect SnapSwitch 6020 FDDI switch (port link/duplex status, power-up counter) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNAP-SWITCH-MIB::sk602xSwitchSubnetMask OID value, configure state conditions and alerts, and monitor any SysKonnect SnapSwitch 6020 FDDI switch (port link/duplex status, power-up counter) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.179 | sk | SK-CONC-MIB |
| 1.3.6.1.4.1.179.2 | skMibs | SK-CONC-MIB |
| 1.3.6.1.4.1.179.2.2 | sk_board | SK-UPPS-MIB |
| 1.3.6.1.4.1.179.2.2.3 | eth | SK-UPPS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.179.2.2.3.2 | sk602xSwitchSubnetMask | SNAP-SWITCH-MIB |