All MIBs › SNAP-SWITCH-MIB › sk602xSwitcTrapRcvr1
sk602xSwitcTrapRcvr1
Module: SNAP-SWITCH-MIB
OID (symbolic): SNAP-SWITCH-MIB::sk602xSwitcTrapRcvr1
OID (numeric): 1.3.6.1.4.1.179.2.2.3.6.1
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-write
Description: The 1th SNMP Trap Destination.
What is sk602xSwitcTrapRcvr1?
The IP address of the first configured SNMP trap destination, one of up to four hosts the switch will send its SNMP traps to.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.179.2.2.3.6.1 snmpwalk -v2c -c public <target> SNAP-SWITCH-MIB::sk602xSwitcTrapRcvr1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.179.2.2.3.6.1.1 snmpget -v2c -c public <target> SNAP-SWITCH-MIB::sk602xSwitcTrapRcvr1.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.179.2.2.3.6.1.1 a <value>
Start monitoring SysKonnect SnapSwitch 6020 FDDI switch (port link/duplex status, power-up counter) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SNAP-SWITCH-MIB::sk602xSwitcTrapRcvr1 OID value, configure state conditions and alerts, and monitor any SysKonnect SnapSwitch 6020 FDDI switch (port link/duplex status, power-up counter) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.179 | sk | SK-CONC-MIB |
| 1.3.6.1.4.1.179.2 | skMibs | SK-CONC-MIB |
| 1.3.6.1.4.1.179.2.2 | sk_board | SK-UPPS-MIB |
| 1.3.6.1.4.1.179.2.2.3 | eth | SK-UPPS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.179.2.2.3.6 | sk602xSwitchManager | SNAP-SWITCH-MIB |
| 1.3.6.1.4.1.179.2.2.3.6.1 | sk602xSwitcTrapRcvr1 | SNAP-SWITCH-MIB |