All MIBs › SLE-RED-MIB › sleRedControlFaultTimeoutAction
sleRedControlFaultTimeoutAction
Module: SLE-RED-MIB
OID (symbolic): SLE-RED-MIB::sleRedControlFaultTimeoutAction
OID (numeric): 1.3.6.1.4.1.6296.101.22.1.2.8
Node type: OBJECT-TYPE
Type: SleRedFaultActionType
Access: read-write
Description: If any software module doesn't respond for healthcheck messages for the certain time, the given action is taken. For 'switchover' action, if the board is active and a standby board is available, 'switchover' is carried out.
If a standby board is not available, just warning message is left. If it is a standby board, 'reset' is carried out.
What is sleRedControlFaultTimeoutAction?
This object configures the action taken when a software module stops responding to healthcheck messages, mirroring the read-only sleRedFaultTimeoutAction but allowing an admin to change it: switchover, a logged warning, or a reset depending on board role and standby availability. Admins adjust this setting to control how the system reacts to a hung, as opposed to crashed, software module. For example, setting this to switchover ensures an unresponsive module on the active board triggers automatic failover to the standby rather than leaving the system in a degraded state.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6296.101.22.1.2.8 snmpwalk -v2c -c public <target> SLE-RED-MIB::sleRedControlFaultTimeoutAction
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6296.101.22.1.2.8.1 snmpget -v2c -c public <target> SLE-RED-MIB::sleRedControlFaultTimeoutAction.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6296.101.22.1.2.8.1 s <value>
Start monitoring DASAN Networks/Hanasoft SLE OLT broadband access chassis (active/standby redundancy status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SLE-RED-MIB::sleRedControlFaultTimeoutAction OID value, configure state conditions and alerts, and monitor any DASAN Networks/Hanasoft SLE OLT broadband access chassis (active/standby redundancy status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6296 | dasan | DASAN-DHCP-MIB |
| 1.3.6.1.4.1.6296.101 | sleMgmt | DASAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6296.101.22 | sleRed | SLE-RED-MIB |
| 1.3.6.1.4.1.6296.101.22.1 | sleRedBase | SLE-RED-MIB |
| 1.3.6.1.4.1.6296.101.22.1.2 | sleRedControl | SLE-RED-MIB |
| 1.3.6.1.4.1.6296.101.22.1.2.8 | sleRedControlFaultTimeoutAction | SLE-RED-MIB |