SLE-MPLS-TP-TUNNEL-STATISTICS-MIB :: sleMplsTpTunnelStatsControlName

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SLE-MPLS-TP-TUNNEL-STATISTICS-MIB › sleMplsTpTunnelStatsControlName

sleMplsTpTunnelStatsControlName

Module: SLE-MPLS-TP-TUNNEL-STATISTICS-MIB

OID (symbolic): SLE-MPLS-TP-TUNNEL-STATISTICS-MIB::sleMplsTpTunnelStatsControlName

OID (numeric): 1.3.6.1.4.1.6296.101.16.20.1.2.6

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: The tunnel name of the LSP.

To clear all the tunnel statistics, give the name as 'all'.

To clear the specific tunnel, give the specific tunnel name.

What is sleMplsTpTunnelStatsControlName?

This value specifies which tunnel's statistics the pending control operation should target, identified by its LSP name, or the special value "all" to target every tunnel. An admin sets it before issuing a clear request through sleMplsTpTunnelStatsControlRequest, scoping the reset to either one specific tunnel or the entire set of tunnels on the device. For example, setting sleMplsTpTunnelStatsControlName to "all" and then triggering the clear request would reset the statistics counters for every MPLS-TP tunnel on the device at once.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6296.101.16.20.1.2.6
snmpwalk -v2c -c public <target> SLE-MPLS-TP-TUNNEL-STATISTICS-MIB::sleMplsTpTunnelStatsControlName

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6296.101.16.20.1.2.6.1
snmpget -v2c -c public <target> SLE-MPLS-TP-TUNNEL-STATISTICS-MIB::sleMplsTpTunnelStatsControlName.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6296.101.16.20.1.2.6.1 s <value>

Start monitoring DASAN Networks / DZS SLE-series OLT (MPLS-TP LSP/tunnel traffic statistics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SLE-MPLS-TP-TUNNEL-STATISTICS-MIB::sleMplsTpTunnelStatsControlName OID value, configure state conditions and alerts, and monitor any DASAN Networks / DZS SLE-series OLT (MPLS-TP LSP/tunnel traffic statistics) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6296dasanDASAN-DHCP-MIB
1.3.6.1.4.1.6296.101sleMgmtDASAN-SMI
1.3.6.1.4.1.6296.101.16sleMplsSLE-MPLS-TP-BFD-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6296.101.16.20sleMplsTpTunnelStatsSLE-MPLS-TP-TUNNEL-STATISTICS-MIB
1.3.6.1.4.1.6296.101.16.20.1sleMplsTpTunnelStatsTableSLE-MPLS-TP-TUNNEL-STATISTICS-MIB
1.3.6.1.4.1.6296.101.16.20.1.2sleMplsTpTunnelStatsControlSLE-MPLS-TP-TUNNEL-STATISTICS-MIB
1.3.6.1.4.1.6296.101.16.20.1.2.6sleMplsTpTunnelStatsControlNameSLE-MPLS-TP-TUNNEL-STATISTICS-MIB