All MIBs › SL10-MIB › relay2CurrentState
relay2CurrentState
Module: SL10-MIB
OID (symbolic): SL10-MIB::relay2CurrentState
OID (numeric): 1.3.6.1.4.1.3052.40.3.2.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: 0-opened, 1-closed
What is relay2CurrentState?
Reads or sets the live state of relay 2's output contact: 0 opens it, 1 closes it. Unlike a sensor input, writing this value actually drives the physical relay, e.g. setting it to 1 could energize an external alarm siren or unlock a door strike depending on wiring.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.40.3.2.2 snmpwalk -v2c -c public <target> SL10-MIB::relay2CurrentState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.40.3.2.2.1 snmpget -v2c -c public <target> SL10-MIB::relay2CurrentState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3052.40.3.2.2.1 i <value>
Start monitoring SL10-series remote site monitoring devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SL10-MIB::relay2CurrentState OID value, configure state conditions and alerts, and monitor any SL10-series remote site monitoring devices from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| 1.3.6.1.4.1.3052.40 | s410 | S410-MIB |
| 1.3.6.1.4.1.3052.40.3 | relays | S410-MIB |
| 1.3.6.1.4.1.3052.40.3.2 | relay2 | S410-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.40.3.2.2 | relay2CurrentState | SL10-MIB |