All MIBs › SL10-MIB › contact1AlarmEnable
contact1AlarmEnable
Module: SL10-MIB
OID (symbolic): SL10-MIB::contact1AlarmEnable
OID (numeric): 1.3.6.1.4.1.3052.40.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: 0-alarms disabled 1-alarms enabled
What is contact1AlarmEnable?
Turns alarm processing for contact 1 on (1) or off (0); when disabled, contact1State still reports the live open/closed reading but no trap or severity escalation is generated when it changes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.40.2.1.3 snmpwalk -v2c -c public <target> SL10-MIB::contact1AlarmEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.40.2.1.3.1 snmpget -v2c -c public <target> SL10-MIB::contact1AlarmEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3052.40.2.1.3.1 i <value>
Start monitoring SL10-series remote site monitoring devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SL10-MIB::contact1AlarmEnable OID value, configure state conditions and alerts, and monitor any SL10-series remote site monitoring devices from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| 1.3.6.1.4.1.3052.40 | s410 | S410-MIB |
| 1.3.6.1.4.1.3052.40.2 | contacts | S410-MIB |
| 1.3.6.1.4.1.3052.40.2.1 | contact1 | S410-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.40.2.1.3 | contact1AlarmEnable | SL10-MIB |