All MIBs › SL-TESTS-MIB › slTestsIfLoopType
slTestsIfLoopType
Module: SL-TESTS-MIB
OID (symbolic): SL-TESTS-MIB::slTestsIfLoopType
OID (numeric): 1.3.6.1.4.1.4515.1.3.13.1.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The loopback type: facility The received signal at this interface is looped back out through the corresponding transmitter in the return direction. terminal The signal that is about to be transmitted is connected to the associated incoming receiver. prbs send and recieve prbs pattern. otnPrbs send and receive OTN prbs
What is slTestsIfLoopType?
This selects the type of loopback to perform on the interface: facility, terminal, PRBS pattern testing, or OTN PRBS testing. Admins choose facility loopback to test the far-end link by reflecting received signal back out, or terminal loopback to test local equipment by looping the outgoing signal back to the local receiver, while PRBS modes actively test for bit errors. To verify a suspect fiber span for bit errors, an admin would set slTestsIfLoopType to prbs(3) rather than a simple facility or terminal loop.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4515.1.3.13.1.1.1.5 snmpwalk -v2c -c public <target> SL-TESTS-MIB::slTestsIfLoopType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4515.1.3.13.1.1.1.5.1 snmpget -v2c -c public <target> SL-TESTS-MIB::slTestsIfLoopType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4515.1.3.13.1.1.1.5.1 i <value>
Start monitoring Smartoptics SiteLight optical transport platform (on-demand loopback diagnostic test status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SL-TESTS-MIB::slTestsIfLoopType OID value, configure state conditions and alerts, and monitor any Smartoptics SiteLight optical transport platform (on-demand loopback diagnostic test status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4515 | smartoptics | SL-NE-MIB |
| 1.3.6.1.4.1.4515.1 | sitelight | SL-NE-MIB |
| 1.3.6.1.4.1.4515.1.3 | slMain | SL-MAIN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4515.1.3.13 | slTests | SL-TESTS-MIB |
| 1.3.6.1.4.1.4515.1.3.13.1 | slTestsIfLoop | SL-TESTS-MIB |
| 1.3.6.1.4.1.4515.1.3.13.1.1 | slTestsIfLoopTable | SL-TESTS-MIB |
| 1.3.6.1.4.1.4515.1.3.13.1.1.1 | slTestsIfLoopEntry | SL-TESTS-MIB |
| 1.3.6.1.4.1.4515.1.3.13.1.1.1.5 | slTestsIfLoopType | SL-TESTS-MIB |