All MIBs › SL-TESTS-MIB › slTestsIfLoopStatus
slTestsIfLoopStatus
Module: SL-TESTS-MIB
OID (symbolic): SL-TESTS-MIB::slTestsIfLoopStatus
OID (numeric): 1.3.6.1.4.1.4515.1.3.13.1.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This variable is used to start or stop a loopback test. In order to start a test the NMS should set the value to start(1). If the test mode is toggle, the NMS should stop the test by setting the value to stop(2). In the case of prbs test, after the test has stopped, if the test fails the value of the status shall be fail(3).
What is slTestsIfLoopStatus?
This is a command object used to start or stop a loopback test on an interface, and can also report that a PRBS test failed. Admins set it to start(1) to begin the loopback, and if the test mode is toggle, must explicitly set it to stop(2) to end the test rather than waiting for a timeout. For a PRBS bit-error-rate test, if slTestsIfLoopStatus reads fail(3) after stopping, the admin knows errors were detected during that test run.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4515.1.3.13.1.1.1.3 snmpwalk -v2c -c public <target> SL-TESTS-MIB::slTestsIfLoopStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4515.1.3.13.1.1.1.3.1 snmpget -v2c -c public <target> SL-TESTS-MIB::slTestsIfLoopStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4515.1.3.13.1.1.1.3.1 i <value>
Start monitoring Smartoptics SiteLight optical transport platform (on-demand loopback diagnostic test status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SL-TESTS-MIB::slTestsIfLoopStatus OID value, configure state conditions and alerts, and monitor any Smartoptics SiteLight optical transport platform (on-demand loopback diagnostic test status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4515 | smartoptics | SL-NE-MIB |
| 1.3.6.1.4.1.4515.1 | sitelight | SL-NE-MIB |
| 1.3.6.1.4.1.4515.1.3 | slMain | SL-MAIN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4515.1.3.13 | slTests | SL-TESTS-MIB |
| 1.3.6.1.4.1.4515.1.3.13.1 | slTestsIfLoop | SL-TESTS-MIB |
| 1.3.6.1.4.1.4515.1.3.13.1.1 | slTestsIfLoopTable | SL-TESTS-MIB |
| 1.3.6.1.4.1.4515.1.3.13.1.1.1 | slTestsIfLoopEntry | SL-TESTS-MIB |
| 1.3.6.1.4.1.4515.1.3.13.1.1.1.3 | slTestsIfLoopStatus | SL-TESTS-MIB |