All MIBs › SL-OPT-APS-MIB › optApsConfigRevertive
optApsConfigRevertive
Module: SL-OPT-APS-MIB
OID (symbolic): SL-OPT-APS-MIB::optApsConfigRevertive
OID (numeric): 1.3.6.1.4.1.4515.1.11.1.1.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description: This object is used to configure the APS revertive or nonrevertive option (read-write).
revertive : Will switch the working connection back to active state after the Wait-To-restore interval has expired and the working connection Signal-Fault/Signal-Degrade has been cleared. Please refer to 'optApsWaitToRestore' for description of Wait-To-Restore interval. nonrevertive : The protection connection continues to be the active connection, The active connection does not switch to the working connection.
What is optApsConfigRevertive?
Read-create nonrevertive(1)/revertive(2) enumeration choosing whether the protection connection automatically hands traffic back to the working connection once the fault clears and optApsConfigWaitToRestore has elapsed (revertive), or stays on protection indefinitely until manually switched (nonrevertive).
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4515 | smartoptics | SL-NE-MIB |
| 1.3.6.1.4.1.4515.1 | sitelight | SL-NE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4515.1.11 | slOptApsMib | SL-OPT-APS-MIB |
| 1.3.6.1.4.1.4515.1.11.1 | slOptApsConfig | SL-OPT-APS-MIB |
| 1.3.6.1.4.1.4515.1.11.1.1 | optApsConfigTable | SL-OPT-APS-MIB |
| 1.3.6.1.4.1.4515.1.11.1.1.1 | optApsConfigEntry | SL-OPT-APS-MIB |
| 1.3.6.1.4.1.4515.1.11.1.1.1.12 | optApsConfigRevertive | SL-OPT-APS-MIB |