All MIBs › SL-OPT-APS-MIB › optApsConfigActiveRequest
optApsConfigActiveRequest
Module: SL-OPT-APS-MIB
OID (symbolic): SL-OPT-APS-MIB::optApsConfigActiveRequest
OID (numeric): 1.3.6.1.4.1.4515.1.11.1.1.1.20
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The Active Switch APS request:
optApsRevertive : Switch back to working connection after the Wait-to-Restore interval is over, and failures are cleared. It is the lowest priority. optApsManual : Manual switch causes APS switch unless a request of equal or higher priority is in effect. optApsSignalFailure : Switch due to signal failure. optApsForceSwitch : Forced switch forces hardware to switch the active connection even if the other connection (could be working connection or protection connection) is in alarm. optApsLockOut : This is the highest priority switch. This will override all other requests. optApsLockOut : indicates that the last switchover to the working occurred because of protection lockout.
What is optApsConfigActiveRequest?
Read-only enumeration reporting which APS switch request is currently the active/winning one on this channel, using the same priority-ordered value set as optApsConfigSwitchReason (optApsRevertive lowest through optApsLockOut highest) -- tells you which competing request (manual, automatic, fault-driven, or lockout) is presently controlling the channel's state.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4515.1.11.1.1.1.20 snmpwalk -v2c -c public <target> SL-OPT-APS-MIB::optApsConfigActiveRequest
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4515.1.11.1.1.1.20.1 snmpget -v2c -c public <target> SL-OPT-APS-MIB::optApsConfigActiveRequest.1
Start monitoring Smartoptics SiteLight optical transport platform (optical Automatic Protection Switching status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SL-OPT-APS-MIB::optApsConfigActiveRequest OID value, configure state conditions and alerts, and monitor any Smartoptics SiteLight optical transport platform (optical Automatic Protection Switching status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4515 | smartoptics | SL-NE-MIB |
| 1.3.6.1.4.1.4515.1 | sitelight | SL-NE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4515.1.11 | slOptApsMib | SL-OPT-APS-MIB |
| 1.3.6.1.4.1.4515.1.11.1 | slOptApsConfig | SL-OPT-APS-MIB |
| 1.3.6.1.4.1.4515.1.11.1.1 | optApsConfigTable | SL-OPT-APS-MIB |
| 1.3.6.1.4.1.4515.1.11.1.1.1 | optApsConfigEntry | SL-OPT-APS-MIB |
| 1.3.6.1.4.1.4515.1.11.1.1.1.20 | optApsConfigActiveRequest | SL-OPT-APS-MIB |