SL-MAIN-MIB :: slmRstpEnabled

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › SL-MAIN-MIB › slmRstpEnabled

slmRstpEnabled

Module: SL-MAIN-MIB

OID (symbolic): SL-MAIN-MIB::slmRstpEnabled

OID (numeric): 1.3.6.1.4.1.4515.1.3.1.46

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: Enable/Disable the RSTP protocol. Defalut value is TRUE.

What is slmRstpEnabled?

This read-write flag enables or disables the RSTP (Rapid Spanning Tree Protocol) on the box, defaulting to true. An admin disables this only in a topology with no redundant paths where STP overhead isn't needed, since it otherwise protects against accidental network loops.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4515.1.3.1.46
snmpwalk -v2c -c public <target> SL-MAIN-MIB::slmRstpEnabled

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4515.1.3.1.46.1
snmpget -v2c -c public <target> SL-MAIN-MIB::slmRstpEnabled.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4515.1.3.1.46.1 s <value>

Start monitoring SmartOptics SiteLight optical transport main control card/chassis (system/alarm/software-version status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SL-MAIN-MIB::slmRstpEnabled OID value, configure state conditions and alerts, and monitor any SmartOptics SiteLight optical transport main control card/chassis (system/alarm/software-version status) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4515smartopticsSL-NE-MIB
1.3.6.1.4.1.4515.1sitelightSL-NE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4515.1.3slMainSL-MAIN-MIB
1.3.6.1.4.1.4515.1.3.1slmSysSL-MAIN-MIB
1.3.6.1.4.1.4515.1.3.1.46slmRstpEnabledSL-MAIN-MIB