SIEMENS-HP4KHIM-MIB

All MIBs › SIEMENS-HP4KHIM-MIB

Organization: Siemens

Last Updated: 2006-11-10

Category: Siemens Enterprise

Description: Manages Siemens HP4K host interface module configuration, port status, and data path state.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SIEMENS-HP4KHIM-MIB?

SIEMENS-HP4KHIM-MIB is a Siemens enterprise MIB for the HiPath 4000 (HP4K) telephony platform's Host Interface Module (HIM), covering hardware architecture identification, software version/release tracking, and welcome-page/PABX (private branch exchange) identification data. It exposes objects reporting hardware architecture type, system release and revision level, HIM version, and PABX system numbers, alongside a 'welcome page' table used for system identification during login/administration. Its monitoring emphasis is squarely on software version and hardware architecture status: confirming which HP4K system release, revision level, and hardware architecture a given HIM is running, which is essential for compatibility checks before applying patches or interoperating with other PBX nodes. It is a self-contained Siemens enterprise MIB without evident dependency on external standard MIBs. It is deployed in enterprise/carrier telephony environments running Siemens HiPath 4000 PBX systems where the HIM component bridges host management functions to the switching fabric, and a SIEMENS-HP4KHIM-MIB download from Siemens/Unify support lets administrators load it into a MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SIEMENS-HP4KHIM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Siemens HiPath 4000 (HP4K) PBX host interface module

Monitoring Examples

An administrator would poll himHP4KVersion, himSystemRelease, and himRevisionLevel together to confirm the exact software build running on a HIM before applying a firmware update, and check himHWArchitecture/himHWArchitectureType to ensure the update package is compatible with the installed hardware generation. Reading himWelPgTable entries such as himWelPgPabxId and himWelPgSysNo confirms which PABX and system number the HIM belongs to, which matters when managing a multi-node HiPath cluster where mismatched release levels between nodes can cause interoperability issues.

What Can Be Monitored

HIM hardware architecture type
system release version
revision level
PABX identifier
system number
operation mode

Imported Objects

From SNMPv2-CONF

NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
MacAddress
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using himChanges OID:

Select a Siemens HiPath 4000 (HP4K) PBX host interface module (hardware architecture/software release identification) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type himChanges into the Find box to locate it in the OID tree, then select it and click OK. Indicates the number of finished HIM discoveries - corresponds to the number of hicomHWDiscovXXX traps sent out. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
siemens	1.3.6.1.4.1.4329
iandcAdmin	1.3.6.1.4.1.4329.2
hp4khim	1.3.6.1.4.1.4329.2.51
himWelcomePage	1.3.6.1.4.1.4329.2.51.1
himWelPgTable	1.3.6.1.4.1.4329.2.51.1.1		not-accessible
himWelPgEntry	1.3.6.1.4.1.4329.2.51.1.1.1		not-accessible
HIM himWelPgPabxId	1.3.6.1.4.1.4329.2.51.1.1.1.1	HimPabxId	read-only
HIM himWelPgSysNo	1.3.6.1.4.1.4329.2.51.1.1.1.2	HimSwitchNumber	read-only	This field contains the system number (max. 17 characters).
OCT himHP4KVersion	1.3.6.1.4.1.4329.2.51.1.1.1.3	OCTET STRING	read-only	This field contains the Hicom/HiPath version number of the system (max. 4 characters).
OCT himSystemRelease	1.3.6.1.4.1.4329.2.51.1.1.1.4	OCTET STRING	read-only	This field contains the system release number of the system (max. 2 characters).
OCT himRevisionLevel	1.3.6.1.4.1.4329.2.51.1.1.1.5	OCTET STRING	read-only	This field contains the revision number of the system software (max. 2 characters).
OCT himHWArchitecture	1.3.6.1.4.1.4329.2.51.1.1.1.6	OCTET STRING	read-only	This field contains the information on hardware architecture in the format [hw-architecture][system-variant][hw-design] [hw-architecture] Abbreviation describing hardware architecture. F.i '4300', '350E', etc. [system-variant] H40: SYSTEM VARIANT 40 H80: SYSTEM VARIANT 80 H600: SYSTEM VARIANT 600 [hw-design] ECX: HARDWARE DESIGN EXTENDED COMPACT EXTENDED ECDSC: HARDWARE DESIGN EXTENDED COMPACT DSC CXE: HARDWARE DESIGN EXTENDED COMPACT CXE
OCT himHWArchitectureType	1.3.6.1.4.1.4329.2.51.1.1.1.7	OCTET STRING	read-only	This field contains abbreviation describing hardware architecture type (max. 3 characters).
OCT himOperationMode	1.3.6.1.4.1.4329.2.51.1.1.1.8	OCTET STRING	read-only	This field contains the operating mode of the system. Possible Values: SIMPLEX: OPERATING MODE SIMPLEX DUPLEX: OPERATING MODE DUPLEX REDUNDANCY
OCT himSWUProc1	1.3.6.1.4.1.4329.2.51.1.1.1.9	OCTET STRING	read-only	These fields contains the name of the SWU processor board (max. 8 characters). SWU = Switching Unit Possible values: - CC-A - CC-B
OCT himSWUMemory1	1.3.6.1.4.1.4329.2.51.1.1.1.10	OCTET STRING	read-only	These fields contain the size of the SWU memory for each processor card. SWU = Switching Unit
OCT himSWUProc2	1.3.6.1.4.1.4329.2.51.1.1.1.11	OCTET STRING	read-only	These fields contains the name of the SWU processor board (max. 8 characters). SWU = Switching Unit Possible values: - CC-A - CC-B
OCT himSWUMemory2	1.3.6.1.4.1.4329.2.51.1.1.1.12	OCTET STRING	read-only	These fields contain the size of the SWU memory for each processor card. SWU = Switching Unit
himSwitchData	1.3.6.1.4.1.4329.2.51.2
himTechInfoTable	1.3.6.1.4.1.4329.2.51.2.1		not-accessible
himTechInfoEntry	1.3.6.1.4.1.4329.2.51.2.1.1		not-accessible
HIM himTechInfoPabxId	1.3.6.1.4.1.4329.2.51.2.1.1.1	HimPabxId	read-only
OCT himTechInfoInfoNo	1.3.6.1.4.1.4329.2.51.2.1.1.2	OCTET STRING	read-only	This field contains the number of the subsystem. This number can be assigned as required when configuring the subsystem.
OCT himTechInfoDate	1.3.6.1.4.1.4329.2.51.2.1.1.3	OCTET STRING	read-only	This field contains the date on which the subsystem was configured.
OCT himTechInfoTechnicalData	1.3.6.1.4.1.4329.2.51.2.1.1.4	OCTET STRING	read-only	This field contains the technical data of the subsystem.
OCT himTechInfoNumber	1.3.6.1.4.1.4329.2.51.2.1.1.5	OCTET STRING	read-only	This field contains the number of each subsystem configured.
OCT himTechInfoExtraText	1.3.6.1.4.1.4329.2.51.2.1.1.6	OCTET STRING	read-only	This field contains additional text.
himNotepadDataTable	1.3.6.1.4.1.4329.2.51.2.2		not-accessible	This node contains the system data entered in a notepad. The table for notepad entries holds a maximum of 30 data records.
himNotepadDataEntry	1.3.6.1.4.1.4329.2.51.2.2.1		not-accessible
HIM himNotepadDataPabxId	1.3.6.1.4.1.4329.2.51.2.2.1.1	HimPabxId	read-only
U32 himNotepadDataInfoNo	1.3.6.1.4.1.4329.2.51.2.2.1.2	Unsigned32	read-only	This field contains the number of the subsystem. This number is assigned permanently when configuring the subsystem.
OCT himNotepadDataDate	1.3.6.1.4.1.4329.2.51.2.2.1.3	OCTET STRING	read-only	This field contains the date on which the subsystem was configured.
OCT himNotepadDataText	1.3.6.1.4.1.4329.2.51.2.2.1.4	OCTET STRING	read-only	This field contains the technical data of the subsystem.
himProjPlanInfoTable	1.3.6.1.4.1.4329.2.51.2.3		not-accessible	This screen makes it possible to generate a file with project planning data.
himProjPlanInfoEntry	1.3.6.1.4.1.4329.2.51.2.3.1		not-accessible
HIM himProjPlanPabxId	1.3.6.1.4.1.4329.2.51.2.3.1.1	HimPabxId	read-only
OCT himProjPlanInfoFile	1.3.6.1.4.1.4329.2.51.2.3.1.2	OCTET STRING	read-only	This field contains the name of the project planning file.
OCT himProjPlanInfoCreationDate	1.3.6.1.4.1.4329.2.51.2.3.1.3	OCTET STRING	read-only	This field contains the date on which the project planning file was generated.
OCT himProjPlanInfoCreationTime	1.3.6.1.4.1.4329.2.51.2.3.1.4	OCTET STRING	read-only	This field contains the time at which the project planning file was generated.
himSpecSwitchData	1.3.6.1.4.1.4329.2.51.3
himSpecShelfDataTable	1.3.6.1.4.1.4329.2.51.3.1		not-accessible	All subscriber and trunk-related lines are grouped within LTU (Line/Trunk Unit) frames. Each frame has several slots for modules. The frame is connected to the system via the LTUC control board. This table contains the frame configuration.
himSpecShelfDataEntry	1.3.6.1.4.1.4329.2.51.3.1.1		not-accessible
HIM himSpecShelfDataPabxId	1.3.6.1.4.1.4329.2.51.3.1.1.1	HimPabxId	read-only
OCT himSpecShelfDataAddress	1.3.6.1.4.1.4329.2.51.3.1.1.2	OCTET STRING	read-only	This field contains the address of the shelf in format LTG.LTU. LTG:Line/Trunk Group LTU: Line/Trunk Unit
OCT himSpecShelfDataFrameType	1.3.6.1.4.1.4329.2.51.3.1.1.3	OCTET STRING	read-only	This field contains the part number of the frame.
INT himSpecShelfDataLTU	1.3.6.1.4.1.4329.2.51.3.1.1.4	INTEGER	read-only	This field contains type of LTU (Line/Trunk Unit) frame. Possible values for LTU frame type: - PREATL - frametype for Preatlantic Hicom Types - CC40F - basisframe for 40CMX - CC80W - basisframe for 80CMX - CC80F - basisframe for 80CMX/DSC and CXE - L80XF - for 80CMX/DSC, CXE, 600ECS and AP shelves - L80XW - extension frame for 80CMX/DSC - LTUW - frame for 600ECX and AP shelves Possible values for AP shelf type: - L80XF - for 80CMX/DSC, CXE, 600ECS and AP shelves - LTUW - frame for 600ECX and AP shelves - INCH19 - 19 inch frame for AP shelves
HIM himSpecShelfDataNetworkType	1.3.6.1.4.1.4329.2.51.3.1.1.5	HimShelfNWType	read-only	This field contains connection type of LTU frame / AP shelf.
IP himSpecShelfDataNetworkAddress	1.3.6.1.4.1.4329.2.51.3.1.1.6	IpAddress	read-only	This field contains network IP address.
OCT himSpecShelfDataRemote	1.3.6.1.4.1.4329.2.51.3.1.1.7	OCTET STRING	read-only	This field shows if frame is remote. Possible values: - yes - frame is remote - no - frame is not remote
OCT himSpecShelfDataLocation	1.3.6.1.4.1.4329.2.51.3.1.1.8	OCTET STRING	read-only	This field contains postal address (city, street, building, ..) , where a FLEX LTU or an AP shelf is located.
OCT himSpecShelfDataLTUC	1.3.6.1.4.1.4329.2.51.3.1.1.9	OCTET STRING	read-only	This field contains part number adding LTUC module. LTUC: Line/Trunk Unit Control.
himSWUBoardTable	1.3.6.1.4.1.4329.2.51.3.2		not-accessible	This table contains the configuration of the peripheral boards. Periphery Assemblies Peripheral and ring generator assemblies as well as SIU are configured in the LTU. The board is entered in the SWU database. LTU = Line/Trunk Unit SIU = Signaling Interface Unit SWU = Switching Unit
himSWUBoardEntry	1.3.6.1.4.1.4329.2.51.3.2.1		not-accessible
HIM himSWUBoardPabxId	1.3.6.1.4.1.4329.2.51.3.2.1.1	HimPabxId	read-only
HIM himSWUBoardPEN	1.3.6.1.4.1.4329.2.51.3.2.1.2	HimPEN	read-only	This field contains the name of the board PEN. PEN: Port Equipment Number The PEN is displayed in the following format: [LTG]-[LTU]-[EBT]. LTG: Line/Trunk Group LTU: Line/Trunk Unit EBT: Slot
OCT himSWUBoardOverlayLTU	1.3.6.1.4.1.4329.2.51.3.2.1.3	OCTET STRING	read-only	This field contains the name of the overlay LTU (Line/Trunk Unit).
OCT himSWUBoardType	1.3.6.1.4.1.4329.2.51.3.2.1.4	OCTET STRING	read-only	This field contains the name of the configured board.
OCT himSWUBoardNominal	1.3.6.1.4.1.4329.2.51.3.2.1.5	OCTET STRING	read-only	This field contains the name of the nominal board.
OCT himSWUBoardActual	1.3.6.1.4.1.4329.2.51.3.2.1.6	OCTET STRING	read-only	This field contains part number of the board that is plugged in.
OCT hhimSWUBoardFirmware	1.3.6.1.4.1.4329.2.51.3.2.1.7	OCTET STRING	read-only	This field contains the name of the firmware.
OCT himSWUBoardRev	1.3.6.1.4.1.4329.2.51.3.2.1.8	OCTET STRING	read-only	This field contains the revision of the board.
OCT himSWUBoardFunctId	1.3.6.1.4.1.4329.2.51.3.2.1.9	OCTET STRING	read-only	Function identification number for boards with more than one functions (e.g. SIUX, STMA, SLMO24).
OCT himSWUBoardMode	1.3.6.1.4.1.4329.2.51.3.2.1.10	OCTET STRING	read-only	This field contains the mode of the board. The mode is only displayed for the RG/ACGEN board.
OCT himSWUBoardLWNo	1.3.6.1.4.1.4329.2.51.3.2.1.11	OCTET STRING	read-only	This field contains the number of the loadware.
OCT himSWUBoardLWInterVer	1.3.6.1.4.1.4329.2.51.3.2.1.12	OCTET STRING	read-only	This field contains the interface version of the board.
OCT himSWUBoardLWName	1.3.6.1.4.1.4329.2.51.3.2.1.13	OCTET STRING	read-only	This field contains the file name of the loadware file or of the initialization file.
OCT himSWUBoardLWDate	1.3.6.1.4.1.4329.2.51.3.2.1.14	OCTET STRING	read-only	This field contains the date on which the loadware or the initialization file was generated.
himSWUPeriphery	1.3.6.1.4.1.4329.2.51.4
himPSIOAssTable	1.3.6.1.4.1.4329.2.51.4.1		not-accessible	This table contains the PSIO assemblies data.
himPSIOAssEntry	1.3.6.1.4.1.4329.2.51.4.1.1		not-accessible
HIM himPSIOAssPabxId	1.3.6.1.4.1.4329.2.51.4.1.1.1	HimPabxId	read-only
HIM himPSIOAssPEN	1.3.6.1.4.1.4329.2.51.4.1.1.2	HimPEN	read-only	This field contains the name of the board PEN. PEN: Port Equipment Number The PEN is displayed in the following format: [LTG]-[LTU]-[EBT]. LTG: Line/Trunk Group LTU: Line/Trunk Unit EBT: Slot
OCT himPSIOAssAssembly	1.3.6.1.4.1.4329.2.51.4.1.1.3	OCTET STRING	read-only	This field contains the name of the PSIO board. PSIO: Peripheral Serial Input Output
OCT himPSIOAssActual	1.3.6.1.4.1.4329.2.51.4.1.1.4	OCTET STRING	read-only	This field contains the part number of the PSIO board.
OCT himPSIOAssFirmware	1.3.6.1.4.1.4329.2.51.4.1.1.5	OCTET STRING	read-only	This field contains the firmware name of the PSIO board.
himSerialLineTable	1.3.6.1.4.1.4329.2.51.4.2		not-accessible	This table contains the serial interfaces data.
himSerialLineEntry	1.3.6.1.4.1.4329.2.51.4.2.1		not-accessible
HIM himSerialLinePabxId	1.3.6.1.4.1.4329.2.51.4.2.1.1	HimPabxId	read-only
U32 himSerialLineNumber	1.3.6.1.4.1.4329.2.51.4.2.1.2	Unsigned32	read-only	This field contains the physical line number of the interface. Possible Values: numeric, 8-63
OCT himSerialLineBoardType	1.3.6.1.4.1.4329.2.51.4.2.1.3	OCTET STRING	read-only	This field contains abbreviation name of the board type.
U32 himSerialLineSpeed	1.3.6.1.4.1.4329.2.51.4.2.1.4	Unsigned32	read-only	This field contains standardized transmission speed (baud rate). Possible Values: 50, 100, 200, 300, 600, 1200, 2400, 4800, 9600, 19200.
OCT himSerialLineLogDevName	1.3.6.1.4.1.4329.2.51.4.2.1.5	OCTET STRING	read-only	This field contains the logical device name of the line. Possible Values: Value - Description CON1 - LOGICAL DEVICE CONNECTION,TERMINAL 1 CON2 - LOGICAL DEVICE CONNECTION,TERMINAL 2 CON3 - LOGICAL DEVICE CONNECTION,TERMINAL 3 CON4 - LOGICAL DEVICE CONNECTION,TERMINAL 4 CON5 - LOGICAL DEVICE CONNECTION 5 CON6 - LOGICAL DEVICE CONNECTION 6 PR1 - LOGICAL DEVICE:LINE PRINTER 1 PR2 - LOGICAL DEVICE:LINE PRINTER 2 PR3 - LOGICAL DEVICE:LINE PRINTER 3 PR4 - LOGICAL DEVICE:LINE PRINTER 4
OCT himSerialLineDevType	1.3.6.1.4.1.4329.2.51.4.2.1.6	OCTET STRING	read-only	This field contains the device type of the line. Possible Values: Value - Description PT88 - DEVICE TYPE QUOSC - QUME-ONLY-SCREEN QUOPT - QUME-ONLY-PT88 QUSCAPT - QUME-SCREEN-AND-PT88 PCOSC - PC-D-ONLY-SCREEN PCOPT - PC-D-ONLY-PT88 PCSCAPT - PC-D-SCREEN-AND-PT88 ASC - ASCII-CODE EBC - EBCDIC CODE RSV1 - RESERVED DEVICE TYPE 1 RSV2 - RESERVED DEVICE TYPE 2 RSV3 - RESERVED DEVICE TYPE 3
INT himSerialLineType	1.3.6.1.4.1.4329.2.51.4.2.1.7	INTEGER	read-only	This field contains the line type (operation of synchronous lines (terminals) connected via V24 modems). Possible values: - ASY: asynchronous line type - V24: ccitt rec v24
himSCSIDevTable	1.3.6.1.4.1.4329.2.51.4.3		not-accessible	This table contains the data for the SCSI devices connected.
himSCSIDevEntry	1.3.6.1.4.1.4329.2.51.4.3.1		not-accessible
HIM himSCSIDevPabxId	1.3.6.1.4.1.4329.2.51.4.3.1.1	HimPabxId	read-only
U32 himSCSIDevId	1.3.6.1.4.1.4329.2.51.4.3.1.2	Unsigned32	read-only	This field contains the type of SCSI device.
OCT himSCSIDevType	1.3.6.1.4.1.4329.2.51.4.3.1.3	OCTET STRING	read-only	This field contains the SCSI ID of the device.
OCT himSCSIDevName	1.3.6.1.4.1.4329.2.51.4.3.1.4	OCTET STRING	read-only	This field contains the name of the SCSI device in format: [vendor] [product number].
OCT himSCSIDevFirmware	1.3.6.1.4.1.4329.2.51.4.3.1.5	OCTET STRING	read-only	This field contains the firmware name of the SCSI device.
OCT himSCSIDevLoadDrive	1.3.6.1.4.1.4329.2.51.4.3.1.6	OCTET STRING	read-only	This field displays (if activity is in progress) the device from which the operating system and the database are started.
himCentralSwitchData	1.3.6.1.4.1.4329.2.51.5
himCabinetTable	1.3.6.1.4.1.4329.2.51.5.1		not-accessible	This table contains the data for configuring the cabinets and frames in a system. They reflect the physical structure of the system.
himCabinetEntry	1.3.6.1.4.1.4329.2.51.5.1.1		not-accessible
HIM himCabPabxId	1.3.6.1.4.1.4329.2.51.5.1.1.1	HimPabxId	read-only
OCT himCabAddr	1.3.6.1.4.1.4329.2.51.5.1.1.2	OCTET STRING	read-only	This field contains the cabinet address. Structure of cabinet address: P 1 01 \| \| \|__Number of cabinet in cabinet row \| \|_____Units, position of cabinet row \|_______Tens (P=0, Q=1), position of the cabinet
OCT himCabPhysAddr	1.3.6.1.4.1.4329.2.51.5.1.1.3	OCTET STRING	read-only
OCT himCabCabinet	1.3.6.1.4.1.4329.2.51.5.1.1.4	OCTET STRING	read-only	This field contains the name of the cabinet.
OCT himCabPartNo	1.3.6.1.4.1.4329.2.51.5.1.1.5	OCTET STRING	read-only	This field contains the part number of the cabinet.
U32 himCabShelfNo	1.3.6.1.4.1.4329.2.51.5.1.1.6	Unsigned32	read-only	This field contains the number of the shelf.
OCT himCabFrame	1.3.6.1.4.1.4329.2.51.5.1.1.7	OCTET STRING	read-only	This field contains the name of the frame.
OCT himCabPid1	1.3.6.1.4.1.4329.2.51.5.1.1.8	OCTET STRING	read-only	This field contains the processor ID 1.
OCT himCabPid2	1.3.6.1.4.1.4329.2.51.5.1.1.9	OCTET STRING	read-only	This field contains the processor ID 2.
OCT himCabPid3	1.3.6.1.4.1.4329.2.51.5.1.1.10	OCTET STRING	read-only	This field contains the processor ID 2.
OCT himCabLTUNo	1.3.6.1.4.1.4329.2.51.5.1.1.11	OCTET STRING	read-only	This field contains the number of the LTU (Line/Trunk Unit). The LTU range is divided in two parts: HHS (HICOM Host System) and AP (Access Point). The available values of the ranges are: HHS 1-15 and AP 17-99. The LTU 16 is forbidden. There are existing shelfes which are allowed only in HHS and others which are allowed only in the AP range.
himMemScalingTable	1.3.6.1.4.1.4329.2.51.5.2		not-accessible	This screen contains the memory parameters for each of the devices or features specified. The values are only displayed in Configuration Management. See also DIMSU parameter list.
himMemScalingEntry	1.3.6.1.4.1.4329.2.51.5.2.1		not-accessible
HIM himMemScalingPabxId	1.3.6.1.4.1.4329.2.51.5.2.1.1	HimPabxId	read-only
OCT himMemScalingUnit	1.3.6.1.4.1.4329.2.51.5.2.1.2	OCTET STRING	read-only	This field contains the parameter name (AMO DIMSU).
I32 himMemScalingUsed	1.3.6.1.4.1.4329.2.51.5.2.1.3	Integer32	read-only	This value specifies the number of memory elements already used up. The comparison with the value in the Maximum field indicates how much of the allocated memory is still available for configuring devices or features.
I32 himMemScalingMaxUsed	1.3.6.1.4.1.4329.2.51.5.2.1.4	Integer32	read-only	This field contains the number of memory elements allocated.
I32 himMemScalingAllocated	1.3.6.1.4.1.4329.2.51.5.2.1.5	Integer32	read-only	This field displays the maximum number of memory elements that once have been used up during the lifetime of the switch ('high water mark'). It gives an indication how much memory was necessary at one time, so it is advised to not reduce the Maximum value below this value.
I32 himMemScalingStandard	1.3.6.1.4.1.4329.2.51.5.2.1.6	Integer32	read-only	Standard is the advised value to be set in the Maximum field, if you don't have special needs to set it to a specific value. If you set all devices and features to the standard values it is guaranteed that you don't run out of DIMSU memory.
I32 himMemScalingSysMax	1.3.6.1.4.1.4329.2.51.5.2.1.7	Integer32	read-only	This field contains the maximum number of possible memory elements.
himGeneralSwitchData	1.3.6.1.4.1.4329.2.51.6
himDBConfSys	1.3.6.1.4.1.4329.2.51.6.1
himDBConfSysTable	1.3.6.1.4.1.4329.2.51.6.1.1		not-accessible
himDBConfSysEntry	1.3.6.1.4.1.4329.2.51.6.1.1.1		not-accessible
HIM himDBConfSysPabxId	1.3.6.1.4.1.4329.2.51.6.1.1.1.1	HimPabxId	read-only
OCT himDBConfSysClass1	1.3.6.1.4.1.4329.2.51.6.1.1.1.2	OCTET STRING	read-only	This field contains the name of the system.
OCT himDBConfSysClass2	1.3.6.1.4.1.4329.2.51.6.1.1.1.3	OCTET STRING	read-only	This field contains the coded name of the system.
OCT himDBConfSysHWAss1	1.3.6.1.4.1.4329.2.51.6.1.1.1.4	OCTET STRING	read-only	This field contains the hardware ID of the system.
OCT himDBConfSysHWAss2	1.3.6.1.4.1.4329.2.51.6.1.1.1.5	OCTET STRING	read-only	This field contains the shortened hardware ID of the system.
OCT himDBConfSysDevLine1	1.3.6.1.4.1.4329.2.51.6.1.1.1.6	OCTET STRING	read-only	This field contains the name of the product line.
OCT himDBConfSysDevLine2	1.3.6.1.4.1.4329.2.51.6.1.1.1.7	OCTET STRING	read-only	This field contains the shortened name of the product line. Possible values: - H300: EUROPE DEVELOPMENT - HUSA: US DEVELOPMENT
INT himDBConfSysOpMode	1.3.6.1.4.1.4329.2.51.6.1.1.1.8	INTEGER	read-only	This field contains the operating mode of the system. Possible Values: - SIMPLEX: OPERATING MODE SIMPLEX - DUPLEX: OPERATING MODE DUPLEX REDUNDANCY
OCT himDBConfSysResType	1.3.6.1.4.1.4329.2.51.6.1.1.1.9	OCTET STRING	read-only	This field contains the restart identifier.
OCT himDBConfSysHWArch	1.3.6.1.4.1.4329.2.51.6.1.1.1.10	OCTET STRING	read-only	This field contains the name of the hardware architecture.
OCT himDBConfSysHWArchType	1.3.6.1.4.1.4329.2.51.6.1.1.1.11	OCTET STRING	read-only	This field contains the name of the hardware architecture type.
HIM himDBConfSysNo	1.3.6.1.4.1.4329.2.51.6.1.1.1.12	HimSwitchNumber	read-only	This field contains the number of the system.
INT himDBConfSysLoc	1.3.6.1.4.1.4329.2.51.6.1.1.1.13	INTEGER	read-only	This field contains the name of the location in which the system is installed. Possible Values: - CUSTOMER (customer) - SUPPORT (support) - TESTLAB (testlab)
OCT himDBConfSysBaseApp	1.3.6.1.4.1.4329.2.51.6.1.1.1.14	OCTET STRING	read-only	This field contains the name of the base application.
OCT himDBConfSysDBApp	1.3.6.1.4.1.4329.2.51.6.1.1.1.15	OCTET STRING	read-only	This field contains the name of the database application.
OCT himDBConfSysID	1.3.6.1.4.1.4329.2.51.6.1.1.1.16	OCTET STRING	read-only	This field contains the system identification.
himDBConfHW	1.3.6.1.4.1.4329.2.51.6.2
himDBConfHWTable	1.3.6.1.4.1.4329.2.51.6.2.1		not-accessible
himDBConfHWEntry	1.3.6.1.4.1.4329.2.51.6.2.1.1		not-accessible
HIM himDBConfHWPabxId	1.3.6.1.4.1.4329.2.51.6.2.1.1.1	HimPabxId	read-only
I32 himDBConfHWLTG	1.3.6.1.4.1.4329.2.51.6.2.1.1.2	Integer32	read-only	This field contains the number of LTGs in the system. LTG: Line/Trunk Group
I32 himDBConfHWLTU	1.3.6.1.4.1.4329.2.51.6.2.1.1.3	Integer32	read-only	This field contains the number of LTUs in the system. LTU: Line/Trunk Unit
I32 himDBConfHWLines	1.3.6.1.4.1.4329.2.51.6.2.1.1.4	Integer32	read-only	This field contains the number of lines in the system.
I32 himDBConfHWPorts	1.3.6.1.4.1.4329.2.51.6.2.1.1.5	Integer32	read-only	This field contains the number of ports in the system.
I32 himDBConfHWPBC	1.3.6.1.4.1.4329.2.51.6.2.1.1.6	Integer32	read-only	This field contains the number of peripheral board controllers (PBC) in the system.
I32 himDBConfHWMTSBdPerGSN	1.3.6.1.4.1.4329.2.51.6.2.1.1.7	Integer32	read-only	This field contains the number of memory time switches (MTS) per group switching network (GSN).
I32 himDBConfHWSIUPPerLTU	1.3.6.1.4.1.4329.2.51.6.2.1.1.8	Integer32	read-only	This field contains the number of SIUP boards per LTU (Line/Trunk Unit).
I32 himDBConfHWDIUCPerLTU	1.3.6.1.4.1.4329.2.51.6.2.1.1.9	Integer32	read-only	This field contains the number of DIUC boards per LTU (Line/Trunk Unit).
I32 himDBConfHWHwyPerMTSBd	1.3.6.1.4.1.4329.2.51.6.2.1.1.10	Integer32	read-only	This field contains the number highways (HYW) per MTS board.
I32 himDBConfHWHDLCPerDCL	1.3.6.1.4.1.4329.2.51.6.2.1.1.11	Integer32	read-only	This field contains the number of high level data link control (HDLC) channels per data communication link (DCL).
I32 himDBConfHWPBCPerDCL	1.3.6.1.4.1.4329.2.51.6.2.1.1.12	Integer32	read-only	This field contains the number of peripheral board controllers (PBC) per data communication link (DCL).
I32 himDBConfHWStdSIULine	1.3.6.1.4.1.4329.2.51.6.2.1.1.13	Integer32	read-only	This field contains the number of signaling unit lines. SIU: Signaling-Unit
I32 himDBConfHWConfLine	1.3.6.1.4.1.4329.2.51.6.2.1.1.14	Integer32	read-only	This field contains the number of lines in the CONFERENCE board.
OCT himDBConfHWDBDim	1.3.6.1.4.1.4329.2.51.6.2.1.1.15	OCTET STRING	read-only	This field contains the name of the database dimensioning.
I32 himDBConfHWTableVer	1.3.6.1.4.1.4329.2.51.6.2.1.1.16	Integer32	read-only	This field contains the version of the Conf table.
himHWData	1.3.6.1.4.1.4329.2.51.6.3
himHWDataTable	1.3.6.1.4.1.4329.2.51.6.3.1		not-accessible
himHWDataEntry	1.3.6.1.4.1.4329.2.51.6.3.1.1		not-accessible
HIM himHWDataPabxId	1.3.6.1.4.1.4329.2.51.6.3.1.1.1	HimPabxId	read-only
OCT himHWArch	1.3.6.1.4.1.4329.2.51.6.3.1.1.2	OCTET STRING	read-only	This field contains the name of the hardware architecture.
OCT himHWArchType	1.3.6.1.4.1.4329.2.51.6.3.1.1.3	OCTET STRING	read-only	This field contains the name of the hardware architecture type.
OCT himHWOpMode	1.3.6.1.4.1.4329.2.51.6.3.1.1.4	OCTET STRING	read-only	This field contains the name of the operating mode.
OCT himHWSWUProc1	1.3.6.1.4.1.4329.2.51.6.3.1.1.5	OCTET STRING	read-only	These fields contain the name of the SWU processor board (max. 8 characters). SWU = Switching Unit Possible values: - CC-A - CC-B
OCT himHWSWUMem1	1.3.6.1.4.1.4329.2.51.6.3.1.1.6	OCTET STRING	read-only	These fields contain the size of the SWU memory for each processor board. SWU = Switching Unit
OCT himHWSWUProc2	1.3.6.1.4.1.4329.2.51.6.3.1.1.7	OCTET STRING	read-only	These fields contain the name of the SWU processor board (max. 8 characters). SWU = Switching Unit Possible values: - CC-A - CC-B
OCT himHWSWUMem2	1.3.6.1.4.1.4329.2.51.6.3.1.1.8	OCTET STRING	read-only	These fields contain the size of the SWU memory for each processor board. SWU = Switching Unit
OCT himHWADPProc	1.3.6.1.4.1.4329.2.51.6.3.1.1.9	OCTET STRING	read-only	This field contains the name of the ADP processor.
OCT himHWADPMem	1.3.6.1.4.1.4329.2.51.6.3.1.1.10	OCTET STRING	read-only	This field contains the size of memory used by the ADP.
himLWDataOnCB	1.3.6.1.4.1.4329.2.51.6.4
himLWDataOnCBTable	1.3.6.1.4.1.4329.2.51.6.4.1		not-accessible
himLWDataOnCBEntry	1.3.6.1.4.1.4329.2.51.6.4.1.1		not-accessible
HIM himLWDataOnCBPabxId	1.3.6.1.4.1.4329.2.51.6.4.1.1.1	HimPabxId	read-only
OCT himLWOnCBAss	1.3.6.1.4.1.4329.2.51.6.4.1.1.2	OCTET STRING	read-only	This field contains the hardware ID of the board. Note: Certain types of processor boards (e. g. DPC5) are using only firmware. Therefore, no loadware data is displayed and this field remains empty.
OCT himLWOnCBPBCAddr	1.3.6.1.4.1.4329.2.51.6.4.1.1.3	OCTET STRING	read-only	This field contains the peripheral board controller (PBC) address of the module. Note: Certain types of processor boards (e. g. DPC5) are using only firmware. Therefore, no loadware data is displayed and this field remains empty.
OCT himLWOnCBFileName	1.3.6.1.4.1.4329.2.51.6.4.1.1.4	OCTET STRING	read-only	This field contains the filename of the loadware file. Note: Certain types of processor boards (e. g. DPC5) are using only firmware. Therefore, no loadware data is displayed and this field remains empty.
OCT himLWOnCBProdTime	1.3.6.1.4.1.4329.2.51.6.4.1.1.5	OCTET STRING	read-only	This field contains the production date of the loadware. Note:Certain types of processor boards (e. g. DPC5) are using only firmware. Therefore, no loadware data is displayed and this field remains empty.
himLWDataOnProc	1.3.6.1.4.1.4329.2.51.6.5
himLWOnProcTable	1.3.6.1.4.1.4329.2.51.6.5.1		not-accessible
himLWOnProcEntry	1.3.6.1.4.1.4329.2.51.6.5.1.1		not-accessible
HIM himLWOnProcPabxId	1.3.6.1.4.1.4329.2.51.6.5.1.1.1	HimPabxId	read-only
OCT himLWOnProcAss	1.3.6.1.4.1.4329.2.51.6.5.1.1.2	OCTET STRING	read-only	This field contains the name of the directory where the file with information on Loadware resides, e. g. CCA, CCB or ADP (max. 3 characters).
OCT himLWOnProcInfoType	1.3.6.1.4.1.4329.2.51.6.5.1.1.3	OCTET STRING	read-only	This field contains the boot type. It represents the file name also.
OCT himLWOnProcLWId	1.3.6.1.4.1.4329.2.51.6.5.1.1.4	OCTET STRING	read-only	This field contains the name of the loadware.
OCT himLWOnProcLWIdCMP	1.3.6.1.4.1.4329.2.51.6.5.1.1.5	OCTET STRING	read-only	This field contains the name of the loadware ID for the CMP. This field contains the '-' character if it is not relevant to this board.
OCT himLWOnProcLWIdLP	1.3.6.1.4.1.4329.2.51.6.5.1.1.6	OCTET STRING	read-only	This field contains the name of the loadware ID for the LP. This field contains the '-' character if it is not relevant to this board.
himLWDataOnCSIU	1.3.6.1.4.1.4329.2.51.6.6
himLWOnCSIUTable	1.3.6.1.4.1.4329.2.51.6.6.1		not-accessible	This table contains the loadware data on the central SIU (Signaling Interface Unit).
himLWOnCSIUEntry	1.3.6.1.4.1.4329.2.51.6.6.1.1		not-accessible
HIM himLWOnCSIUPabxId	1.3.6.1.4.1.4329.2.51.6.6.1.1.1	HimPabxId	read-only
OCT himLWOnCSIUNominal	1.3.6.1.4.1.4329.2.51.6.6.1.1.2	OCTET STRING	read-only	This field contains the name of the nominal SIU (Signaling Interface Unit).
OCT himLWOnCSIULWNo	1.3.6.1.4.1.4329.2.51.6.6.1.1.3	OCTET STRING	read-only	This field contains the name of the SIU (Signaling Interface Unit) loadware.
OCT himLWOnCSIUProc	1.3.6.1.4.1.4329.2.51.6.6.1.1.4	OCTET STRING	read-only	This field contains the name of the processor in the SIU (Signaling Interface Unit).
OCT himLWOnCSIUSlot	1.3.6.1.4.1.4329.2.51.6.6.1.1.5	OCTET STRING	read-only	This field contains the name of the SIU (Signaling Interface Unit) slot.
OCT himLWOnCSIUActual	1.3.6.1.4.1.4329.2.51.6.6.1.1.6	OCTET STRING	read-only	This field contains the name of the current SIU (Signaling Interface Unit).
OCT himLWOnCSIUFileName	1.3.6.1.4.1.4329.2.51.6.6.1.1.7	OCTET STRING	read-only	This field contains the file name of the loadware file or of the initialization file.
OCT himLWOnCSIUFileProd	1.3.6.1.4.1.4329.2.51.6.6.1.1.8	OCTET STRING	read-only	This field contains the date on which the loadware or the initialization file was generated.
himMacAddress	1.3.6.1.4.1.4329.2.51.6.7
himMacAddrTable	1.3.6.1.4.1.4329.2.51.6.7.1		not-accessible	This table contains the C-LAN and IPDA MAC addresses which are read during the boot process.
himMacAddrEntry	1.3.6.1.4.1.4329.2.51.6.7.1.1		not-accessible
HIM himMacAddrPabxId	1.3.6.1.4.1.4329.2.51.6.7.1.1.1	HimPabxId	read-only
OCT himMacAddrProc	1.3.6.1.4.1.4329.2.51.6.7.1.1.2	OCTET STRING	read-only	This field contains the name of the processor (CCA, CCB or ADP - max 3 characters). It is also the name of the Unix directory where the file with information on MAC address resides.
OCT himMacAddrInfoType	1.3.6.1.4.1.4329.2.51.6.7.1.1.3	OCTET STRING	read-only	This field contains the condition on which the mac addresses are available.
MAC himMacAddrCLan	1.3.6.1.4.1.4329.2.51.6.7.1.1.4	MacAddress	read-only	This field contains the MAC address for UW7 part. The format is following: 'xx xx xx xx xx xx'.
MAC himMacAddrIPDA	1.3.6.1.4.1.4329.2.51.6.7.1.1.5	MacAddress	read-only	This field contains the MAC address for RMX part. The format is following: 'xx xx xx xx xx xx'.
himFeatures	1.3.6.1.4.1.4329.2.51.7
himMarketingFeatures	1.3.6.1.4.1.4329.2.51.7.1
himMarkFeatTable	1.3.6.1.4.1.4329.2.51.7.1.1		not-accessible
himMarkFeatEntry	1.3.6.1.4.1.4329.2.51.7.1.1.1		not-accessible
HIM himMarkFeatPabxId	1.3.6.1.4.1.4329.2.51.7.1.1.1.1	HimPabxId	read-only
OCT himMarkFeatVer	1.3.6.1.4.1.4329.2.51.7.1.1.1.2	OCTET STRING	read-only	This field contains the version of the software package. Format explanation: H 2 04 \| \|__SW version (01=EV1.0; 02=EV2.0; 03=EV3.0; 04=HiPath 4000 V1.0; 05=HiPath 4000 V2.0; 06=HiPath 4000 V3.0) \| \|_____Marketing concept (1=Old, 2=New)
OCT himMarkFeatSerNo	1.3.6.1.4.1.4329.2.51.7.1.1.1.3	OCTET STRING	read-only	This field contains the serial number of the software package.
OCT himMarkFeatHWId	1.3.6.1.4.1.4329.2.51.7.1.1.1.4	OCTET STRING	read-only	This field contains the dongle ID of the hardware dongle connected.
OCT himMarkFeatInstallDate	1.3.6.1.4.1.4329.2.51.7.1.1.1.5	OCTET STRING	read-only	This field contains the date on which the code word was entered.
OCT himMarkFeatExpiryDate	1.3.6.1.4.1.4329.2.51.7.1.1.1.6	OCTET STRING	read-only	This field contains the date on which the code word will expire.
OCT himMarkFeatConfCode	1.3.6.1.4.1.4329.2.51.7.1.1.1.7	OCTET STRING	read-only	This field contains codeword entry confirmation code.
HIM himMarkFeatTrialModeAct	1.3.6.1.4.1.4329.2.51.7.1.1.1.8	HimYesNo	read-only	This field shows whether trial mode is active. Possible values: - yes - trial mode is activated - no - trial mode is not activated
I32 himMarkFeatTrialRemDays	1.3.6.1.4.1.4329.2.51.7.1.1.1.9	Integer32	read-only	This field contains number of remaining days of an active trial mode.
himSalesFeatTable	1.3.6.1.4.1.4329.2.51.7.1.2		not-accessible
himSalesFeatEntry	1.3.6.1.4.1.4329.2.51.7.1.2.1		not-accessible
HIM himSalesFeatPabxId	1.3.6.1.4.1.4329.2.51.7.1.2.1.1	HimPabxId	read-only
OCT himSalesFeatMarketPackId	1.3.6.1.4.1.4329.2.51.7.1.2.1.2	OCTET STRING	read-only	This column contains the CM ids of the marketing packages.
OCT himSalesFeatMarketPack	1.3.6.1.4.1.4329.2.51.7.1.2.1.3	OCTET STRING	read-only	This column contains the names of the marketing packages.
OCT himSalesFeatContract	1.3.6.1.4.1.4329.2.51.7.1.2.1.4	OCTET STRING	read-only	This column indicates whether the marketing packages have been purchased.
OCT himSalesFeatUsed	1.3.6.1.4.1.4329.2.51.7.1.2.1.5	OCTET STRING	read-only	This column indicates whether the marketing packages have been used.
OCT himSalesFeatFree	1.3.6.1.4.1.4329.2.51.7.1.2.1.6	OCTET STRING	read-only	This field contains the number of free packages.
OCT himSalesFeatMarkForTrial	1.3.6.1.4.1.4329.2.51.7.1.2.1.7	OCTET STRING	read-only	This field contains the number of packages (entites) marked for trial or blocked (if the trial mode is not active).
himTechFeatures	1.3.6.1.4.1.4329.2.51.7.2
himTechFeatTable	1.3.6.1.4.1.4329.2.51.7.2.1		not-accessible
himTechFeatEntry	1.3.6.1.4.1.4329.2.51.7.2.1.1		not-accessible	This table contains all enabled and disabled customer-specific features. Use the Object List view to display a list of all features availavle.
HIM himTechFeatPabxId	1.3.6.1.4.1.4329.2.51.7.2.1.1.1	HimPabxId	read-only
OCT himTechFeatId	1.3.6.1.4.1.4329.2.51.7.2.1.1.2	OCTET STRING	read-only	This field contains the CM id of the customer-specific feature.
OCT himTechFeatName	1.3.6.1.4.1.4329.2.51.7.2.1.1.3	OCTET STRING	read-only	This field contains the name of the customer-specific feature.
HIM himTechFeatState	1.3.6.1.4.1.4329.2.51.7.2.1.1.4	HimYesNo	read-only	This field contains the status of the customer-specific feature.
himAPSPatches	1.3.6.1.4.1.4329.2.51.8
himSwitchAPS	1.3.6.1.4.1.4329.2.51.8.1
himSwitchAPSTable	1.3.6.1.4.1.4329.2.51.8.1.1		not-accessible
himSwitchAPSEntry	1.3.6.1.4.1.4329.2.51.8.1.1.1		not-accessible
HIM himSwitchAPSPabxId	1.3.6.1.4.1.4329.2.51.8.1.1.1.1	HimPabxId	read-only
OCT himSwitchAPSName	1.3.6.1.4.1.4329.2.51.8.1.1.1.2	OCTET STRING	read-only
OCT himSwitchAPSCorrVer	1.3.6.1.4.1.4329.2.51.8.1.1.1.3	OCTET STRING	read-only
OCT himSwitchAPSPartNo	1.3.6.1.4.1.4329.2.51.8.1.1.1.4	OCTET STRING	read-only
himReplacedAMOs	1.3.6.1.4.1.4329.2.51.8.2
himReplAMOTable	1.3.6.1.4.1.4329.2.51.8.2.1		not-accessible	This table displays those AMOs that have been changed since the last system correction version.
himReplAMOEntry	1.3.6.1.4.1.4329.2.51.8.2.1.1		not-accessible
HIM himReplAMOPabxId	1.3.6.1.4.1.4329.2.51.8.2.1.1.1	HimPabxId	read-only
OCT himReplAMOAPS	1.3.6.1.4.1.4329.2.51.8.2.1.1.2	OCTET STRING	read-only	The APS in which the change has been made.
OCT himReplAMOName	1.3.6.1.4.1.4329.2.51.8.2.1.1.3	OCTET STRING	read-only	This field contains the name of the AMO command.
OCT himReplAMOInAPSDir	1.3.6.1.4.1.4329.2.51.8.2.1.1.4	OCTET STRING	read-only	This field contains the name of the subsystem in the DIR file.
OCT himReplAMOSubsystem	1.3.6.1.4.1.4329.2.51.8.2.1.1.5	OCTET STRING	read-only	This field contains the name of the current subsystem.
himPatchInfo	1.3.6.1.4.1.4329.2.51.8.3
himPatchInfoTable	1.3.6.1.4.1.4329.2.51.8.3.1		not-accessible	This table contains information on the software patches that have been implemented.
himPatchInfoEntry	1.3.6.1.4.1.4329.2.51.8.3.1.1		not-accessible
HIM himPatchInfoPabxId	1.3.6.1.4.1.4329.2.51.8.3.1.1.1	HimPabxId	read-only
OCT himPatchInfoPatchNo	1.3.6.1.4.1.4329.2.51.8.3.1.1.2	OCTET STRING	read-only	This field contains the number of the patch.
OCT himPatchInfoPatchGroup	1.3.6.1.4.1.4329.2.51.8.3.1.1.3	OCTET STRING	read-only	This field contains the name of the patch group.
HIM himPatchInfoOpt	1.3.6.1.4.1.4329.2.51.8.3.1.1.4	HimYesNo	read-only	This field represents an indicator that the patch is: - optional: not part of patch packet, - not optional: a part of patch packet (represents the whole list of internal activated/deactivated patches). The purpose of this field is to give user an option to display all patches as well as only optional ones.
OCT himPatchInfoActHD	1.3.6.1.4.1.4329.2.51.8.3.1.1.5	OCTET STRING	read-only	This field indicates whether the patch is enabled on the hard disk.
OCT himPatchInfoActADP	1.3.6.1.4.1.4329.2.51.8.3.1.1.6	OCTET STRING	read-only	This field indicates whether the patch is enabled on the ADP.
OCT himPatchInfoActBP	1.3.6.1.4.1.4329.2.51.8.3.1.1.7	OCTET STRING	read-only	This field indicates whether the patch is enabled on the A/B processor.
himSWVersion	1.3.6.1.4.1.4329.2.51.9
himSWVerOnProcTable	1.3.6.1.4.1.4329.2.51.9.1		not-accessible	This table contains data on the software versions loaded on the processor boards.
himSWVerOnProcEntry	1.3.6.1.4.1.4329.2.51.9.1.1		not-accessible
HIM himSWVerOnProcPabxId	1.3.6.1.4.1.4329.2.51.9.1.1.1	HimPabxId	read-only
OCT himSWVerOnProcSrc	1.3.6.1.4.1.4329.2.51.9.1.1.2	OCTET STRING	read-only	This field contains the name of the software source.
OCT himSWVerOnProcSWVer	1.3.6.1.4.1.4329.2.51.9.1.1.3	OCTET STRING	read-only	This field contains the name of the software version of the ADP software. The software version is displayed in the following format: [item-code-prefix][hipath-version][release-no][country-id][country-code][revision-no] e. g. P30252N 43 08 B 000 10
OCT himSWVerOnProcItemCodeNoPrefix	1.3.6.1.4.1.4329.2.51.9.1.1.4	OCTET STRING	read-only	This field contains the prefix of the software.
OCT himSWVerOnProcHP4KVer	1.3.6.1.4.1.4329.2.51.9.1.1.5	OCTET STRING	read-only	This field contains the Hicom/HiPath version.
OCT himSWVerOnProcSysRel	1.3.6.1.4.1.4329.2.51.9.1.1.6	OCTET STRING	read-only	This field contains the system release number.
OCT himSWVerOnProcCountry	1.3.6.1.4.1.4329.2.51.9.1.1.7	OCTET STRING	read-only	This field contains the country identifier.
OCT himSWVerOnProcCountryCode	1.3.6.1.4.1.4329.2.51.9.1.1.8	OCTET STRING	read-only	This field contains the country encoding.
OCT himSWVerOnProcRevNo	1.3.6.1.4.1.4329.2.51.9.1.1.9	OCTET STRING	read-only	This field contains the revision number of the ADP software.
himSwPkgVersion	1.3.6.1.4.1.4329.2.51.10
himSWPkgVerTable	1.3.6.1.4.1.4329.2.51.10.1		not-accessible	This table contains the software versions of the service functions. This data is retrieved using the UNIX command pgkinfo -l.
himSWPkgVerEntry	1.3.6.1.4.1.4329.2.51.10.1.1		not-accessible
HIM himSWPkgVerPabxId	1.3.6.1.4.1.4329.2.51.10.1.1.1	HimPabxId	read-only
OCT himSWPkgVerPkgAbbr	1.3.6.1.4.1.4329.2.51.10.1.1.2	OCTET STRING	read-only	This field contains the abbreviation of the software package.
OCT himSWPkgVerPkgName	1.3.6.1.4.1.4329.2.51.10.1.1.3	OCTET STRING	read-only	This field contains the name of the software package.
OCT himSWPkgVerVersion	1.3.6.1.4.1.4329.2.51.10.1.1.4	OCTET STRING	read-only	This field contains the version of the software package.
OCT himSWPkgVerInstAt	1.3.6.1.4.1.4329.2.51.10.1.1.5	OCTET STRING	read-only	This field contains the date on which the software package was installed.
INT himSWPkgVerStatus	1.3.6.1.4.1.4329.2.51.10.1.1.6	INTEGER	read-only	This field contains the status of the software package.
himSystem	1.3.6.1.4.1.4329.2.51.11
himSysBasicTable	1.3.6.1.4.1.4329.2.51.11.1		not-accessible	This table complements the information about the HiPath 4000 system that is stored in the hicomSystem branch of the hicom MIB.
himSysBasicEntry	1.3.6.1.4.1.4329.2.51.11.1.1		not-accessible
HIM himSysBasicPabxId	1.3.6.1.4.1.4329.2.51.11.1.1.1	HimPabxId	read-only
OCT himSysBasicDomain	1.3.6.1.4.1.4329.2.51.11.1.1.2	OCTET STRING	read-only	This field contains the name of the domain to which the system is belonging.
OCT himSysBasicNodeNo	1.3.6.1.4.1.4329.2.51.11.1.1.3	OCTET STRING	read-only	HiPath node number. This field contains the globally unique number of your own PABX. This has a hierarchical structure containing different levels in Version V1.0 and later. Up to three values of the format: L2- L1- L0 can be used for numbering a system. - L2: area number in level 2 - L1: area number in level 1 - L0: area number in level 0 or node number in the old sense. If the value '0' is selected for a level, this means that the relevant hierarchical level is not being used for node numbering: '0' is equal to 'nothing' or 'level is not set'. With the help of this new node number format it is now possible to implement node numbers in networks in which - just as with dial numbers - the network hierarchy is reflected in the node numbers. The same numbering level (= number of levels set in the node number) must be used for all nodes in a network. This field will always show a three-level display with leading zeroes for levels not used for systems in Version V1.0 and later. Example: - 0-0-100 for 1-level numbering - 0-1-101 for 2-level numbering - 1-2-300 for 3-level numbering Values: 0-9 and '-' with format 22-111-000 Level 0 (000) 0-999 Level 1 (111) 0-253 Level 2 (22) 0-29 Max. 10 digits
HIM himSysBasicLEGK	1.3.6.1.4.1.4329.2.51.11.1.1.4	HimYesNo	read-only	This field tells if the 'LEGK' feature is activated on the system. LEGK is a process within the call processing of HiPath 4000 with the following functions: - Gate keeper function: IP address resolution mechanism for IP trunking requiring the HG3550 board as hardware. - Resource Management: This function monitors network component usage for controlling IP trunking, IPDA scenarios, HFA and direct media connections. The LEGK can be activated at every HiPath 4000 in the network. Alternatively, it can be configured on a specific HiPath 4000 system only.
himSysLANCardsTable	1.3.6.1.4.1.4329.2.51.11.2		not-accessible
himSysLANCardsEntry	1.3.6.1.4.1.4329.2.51.11.2.1		not-accessible
HIM himSysLANCardsPabxId	1.3.6.1.4.1.4329.2.51.11.2.1.1	HimPabxId	read-only
IP himSysLANCardsIPAddr	1.3.6.1.4.1.4329.2.51.11.2.1.2	IpAddress	read-only	Unique IP address within the Customer LAN.
IP himSysLANCardsNetMask	1.3.6.1.4.1.4329.2.51.11.2.1.3	IpAddress	read-only	The netmask of the LAN card. It depends on the class of the LAN Card address.
IP himSysLANCardsBroadCast	1.3.6.1.4.1.4329.2.51.11.2.1.4	IpAddress	read-only	The broadcast address is used to send a datagram packet to all hosts of a network or subnetwork, e.g. for address propagation from a router. The broadcast address also depends on the LAN Card address.
INT himSysLANCardsType	1.3.6.1.4.1.4329.2.51.11.2.1.5	INTEGER	read-only	Type of the LAN card. Possible values are Ethernet and Token Ring.
INT himSysLANCardsStatus	1.3.6.1.4.1.4329.2.51.11.2.1.6	INTEGER	read-only	The status of the configured LAN card. Can be one of the following: - Unknown (no traffic light lit): The LAN Card is configured, but no reboot has been performed. - Enabled (green traffic light lit): The LAN Card is active. - Disabled (red traffic light lit): The LAN Card is not active.
himSysHostsTable	1.3.6.1.4.1.4329.2.51.11.3		not-accessible
himSysHostsEntry	1.3.6.1.4.1.4329.2.51.11.3.1		not-accessible
HIM himSysHostsPabxId	1.3.6.1.4.1.4329.2.51.11.3.1.1	HimPabxId	read-only
I32 himSysHostsNo	1.3.6.1.4.1.4329.2.51.11.3.1.2	Integer32	read-only	Index of the host entry.
IP himSysHostsIPAddr	1.3.6.1.4.1.4329.2.51.11.3.1.3	IpAddress	read-only	The IP address of the host.
OCT himSysHostsName	1.3.6.1.4.1.4329.2.51.11.3.1.4	OCTET STRING	read-only	Unique name of the host.
himSysWAMLConn	1.3.6.1.4.1.4329.2.51.11.4
himSysWAMLConnTable	1.3.6.1.4.1.4329.2.51.11.4.1		not-accessible
himSysWAMLConnEntry	1.3.6.1.4.1.4329.2.51.11.4.1.1		not-accessible
HIM himSysWAMLConnPabxId	1.3.6.1.4.1.4329.2.51.11.4.1.1.1	HimPabxId	read-only
I32 himSysWAMLConnLTG	1.3.6.1.4.1.4329.2.51.11.4.1.1.2	Integer32	read-only	Line/trunk group number. Valid values: 1-1
I32 himSysWAMLConnLTU	1.3.6.1.4.1.4329.2.51.11.4.1.1.3	Integer32	read-only	Line/trunk unit. Valid values: 1-15, for IP Gateway DSP HW of NCUI STMI STMA WAML 1-99, for RG/ACGEN PER DIU SIUP TMD 17-99, for NCUI STMA WAML
I32 himSysWAMLConnSlot	1.3.6.1.4.1.4329.2.51.11.4.1.1.4	Integer32	read-only	Slot number of LTU (Line/Trunk Unit). Valid values: 1-121, for STMI, IP gateway, PER, RG, ACGEN, DIU, SIUP, TMD 1-145, for STMA, WAML
HIM himSysWAMLConnRufNr	1.3.6.1.4.1.4329.2.51.11.4.1.1.5	HimPhoneNumber	read-only	Phone number of the WAML board.
U32 himSysWAMLConnBChl	1.3.6.1.4.1.4329.2.51.11.4.1.1.6	Unsigned32	read-only	Number of b-channels on the WAML board.
OCT himSysWAMLConnStatus	1.3.6.1.4.1.4329.2.51.11.4.1.1.7	OCTET STRING	read-only	Status of the WAML board.
himSysWAMLConnIPTable	1.3.6.1.4.1.4329.2.51.11.4.2		not-accessible
himSysWAMLConnIPEntry	1.3.6.1.4.1.4329.2.51.11.4.2.1		not-accessible
HIM himSysWAMLConnIPPabxId	1.3.6.1.4.1.4329.2.51.11.4.2.1.1	HimPabxId	read-only
I32 himSysWAMLConnIPLTG	1.3.6.1.4.1.4329.2.51.11.4.2.1.2	Integer32	read-only	Line/trunk group number. Valid values: 1-1
I32 himSysWAMLConnIPLTU	1.3.6.1.4.1.4329.2.51.11.4.2.1.3	Integer32	read-only	Line/trunk unit. Valid values: 1-15, for IP Gateway DSP HW of NCUI STMI STMA WAML 1-99, for RG/ACGEN PER DIU SIUP TMD 17-99, for NCUI STMA WAML
I32 himSysWAMLConnIPSlot	1.3.6.1.4.1.4329.2.51.11.4.2.1.4	Integer32	read-only	Slot number of LTU (Line/Trunk Unit). Valid values: 1-121, for STMI, IP gateway, PER, RG, ACGEN, DIU, SIUP, TMD 1-145, for STMA, WAML
OCT himSysWAMLConnIPIfName	1.3.6.1.4.1.4329.2.51.11.4.2.1.5	OCTET STRING	read-only	Name of the interface.
IP himSysWAMLConnIPAddr	1.3.6.1.4.1.4329.2.51.11.4.2.1.6	IpAddress	read-only	IP address of the WAML connection.
IP himSysWAMLConnIPNetMask	1.3.6.1.4.1.4329.2.51.11.4.2.1.7	IpAddress	read-only	Net mask of the WAML connection.
himBoards	1.3.6.1.4.1.4329.2.51.12
himBoardBasicTable	1.3.6.1.4.1.4329.2.51.12.1		not-accessible	This table contains the boards that are managed by CM. It can be viewed as an extension of hicomBCSUTable. Please note that the PEN (LTG, LTU, Slot) of LTU boards is different from what is contained in CM, and uses the same format as in the hicom MIB.
himBoardBasicEntry	1.3.6.1.4.1.4329.2.51.12.1.1		not-accessible
HIM himBoardBasicPabxId	1.3.6.1.4.1.4329.2.51.12.1.1.1	HimPabxId	read-only
I32 himBoardBasicLTG	1.3.6.1.4.1.4329.2.51.12.1.1.2	Integer32	read-only	Line/trunk group number. Valid values: 1-1
I32 himBoardBasicLTU	1.3.6.1.4.1.4329.2.51.12.1.1.3	Integer32	read-only	Line/trunk unit. Valid values: 1-15, for IP Gateway DSP HW of NCUI STMI STMA WAML 1-99, for RG/ACGEN PER DIU SIUP TMD 17-99, for NCUI STMA WAML
I32 himBoardBasicSlot	1.3.6.1.4.1.4329.2.51.12.1.1.4	Integer32	read-only	Slot number of LTU (Line/Trunk Unit). Valid values: 1-121, for STMI, IP gateway, PER, RG, ACGEN, DIU, SIUP, TMD 1-145, for STMA, WAML
I32 himBoardBasicFuncId	1.3.6.1.4.1.4329.2.51.12.1.1.5	Integer32	read-only	Function ID Valid values: 0-255 2 for SIU type 2 (MFV) 3 for SIU type 3 (MFC) 4 for SIU - RDS functionality 5 for SIU - ANI signaling 6 for SIU - CIS multifrequency (MFS) 7 for SIU - line testing
INT himBoardBasicCat	1.3.6.1.4.1.4329.2.51.12.1.1.6	INTEGER	read-only	Category The board type includes: LTG -- line/trunk group LTU -- line/trunk unit PER -- peripheral module PERHW -- load peripheral hardware ACGEN -- alternating current generator DIU -- digital interface unit IPGW -- IP gateway RG -- ring generator SIUP -- signalling unit periphery TMD -- T1 boards
OCT himBoardBasicName	1.3.6.1.4.1.4329.2.51.12.1.1.7	OCTET STRING	read-only	Name of the setup the board is configured to.
HIM himBoardBasicVOIPSec	1.3.6.1.4.1.4329.2.51.12.1.1.8	HimYesNo	read-only
OCT himBoardBasicLWVar	1.3.6.1.4.1.4329.2.51.12.1.1.9	OCTET STRING	read-only	The loadware variant. Default value: 0 Valid values: 0-9, A-D
I32 himBoardBasicNoCirc	1.3.6.1.4.1.4329.2.51.12.1.1.10	Integer32	read-only	Number of circuits to be configured. Valid values: 1-255
himBoardIPTable	1.3.6.1.4.1.4329.2.51.12.2		not-accessible	This table contains the IP address configuration of the boards. Please note that not all fields are used for all boards.
himBoardIPEntry	1.3.6.1.4.1.4329.2.51.12.2.1		not-accessible
IP himBoardIPGwyIPAddr	1.3.6.1.4.1.4329.2.51.12.2.1.1	IpAddress	read-only	IP address of the gateway. Valid for: STMI
IP himBoardIPSrcIPAddr	1.3.6.1.4.1.4329.2.51.12.2.1.2	IpAddress	read-only	Source IP address of STMI-HFA board. A valid Source IP address must always be specified in order to enable the IP phones to address the system (SWU) Default: 0.0.0.0 Valid for: HFA
IP himBoardIPNetMask	1.3.6.1.4.1.4329.2.51.12.2.1.3	IpAddress	read-only	IP network mask. Valid for: HFA
IP himBoardIPDefRouter	1.3.6.1.4.1.4329.2.51.12.2.1.4	IpAddress	read-only	IP address of the default router within the LAN segment. The default router takes care of routing forward all packets with a destination address with a network part different from the own LAN segment. Default: 0.0.0.0 Valid for: HFA
IP himBoardIPCustLANIP	1.3.6.1.4.1.4329.2.51.12.2.1.5	IpAddress	read-only	IP address of customer LAN. Default: 0.0.0.0 Valid for: IGW, SIP
IP himBoardIPSTMI2IGWSubMask	1.3.6.1.4.1.4329.2.51.12.2.1.6	IpAddress	read-only	IP subnet mask of LAN segment. Default: 0.0.0.0 Valid for: IGW, SIP
IP himBoardIPDefGWIP	1.3.6.1.4.1.4329.2.51.12.2.1.7	IpAddress	read-only	Default gateway IP address. Default: 0.0.0.0 Valid for: IGW, SIP
IP himBoardIPManStatIP	1.3.6.1.4.1.4329.2.51.12.2.1.8	IpAddress	read-only	IP address of management station. Default: 0.0.0.0 Valid for: IGW, SIP
I32 himBoardIPManStatPort	1.3.6.1.4.1.4329.2.51.12.2.1.9	Integer32	read-only	Port number of management station. Valid values: 1024 - 65535 Default: 0 Valid for: IGW, SIP
IP himBoardIPBckpServIP	1.3.6.1.4.1.4329.2.51.12.2.1.10	IpAddress	read-only	IP address of backup server. Default: 0.0.0.0 Valid for: IGW, SIP
I32 himBoardIPBckpServPort	1.3.6.1.4.1.4329.2.51.12.2.1.11	Integer32	read-only	Port number of backup server. Default: 0 (0 means 'undefined port number') Valid for: IGW, SIP
himBoardLocTable	1.3.6.1.4.1.4329.2.51.12.3		not-accessible	This table contains the location data of the boards. It is only available for boards of type DSX, LTUCA, LTUCE and LTUCX.
himBoardLocEntry	1.3.6.1.4.1.4329.2.51.12.3.1		not-accessible
I32 himBoardLocId	1.3.6.1.4.1.4329.2.51.12.3.1.1	Integer32	read-only	Describes the location of the switch for the system configurator. Valid values: 0-999
OCT himBoardLocLoc	1.3.6.1.4.1.4329.2.51.12.3.1.2	OCTET STRING	read-only	Postal address of the LTU (Line/Trunk Unit) shelf. Applies to the Local Connection Type. Valid values: text, up to 45 characters
HIM himBoardLocPhoneNo	1.3.6.1.4.1.4329.2.51.12.3.1.3	HimPhoneNumber	read-only	Phone number at the shelf location. Valid values: 0-9, *, #, A-D, up to 22 characters
HIM himBoardLocFaxNo	1.3.6.1.4.1.4329.2.51.12.3.1.4	HimPhoneNumber	read-only	Fax number at the shelf location. Valid values: 0-9, *, #, A-D, up to 22 characters
himIPDA	1.3.6.1.4.1.4329.2.51.13
himIPDAGenData	1.3.6.1.4.1.4329.2.51.13.1
himIPDAGenTable	1.3.6.1.4.1.4329.2.51.13.1.1		not-accessible	General settings that are true for all IPDAs.
himIPDAGenEntry	1.3.6.1.4.1.4329.2.51.13.1.1.1		not-accessible
HIM himIPDAGenPabxId	1.3.6.1.4.1.4329.2.51.13.1.1.1.1	HimPabxId	read-only
I32 himIPDAGenSpeed	1.3.6.1.4.1.4329.2.51.13.1.1.1.2	Integer32	read-only	Indicates the bit-rate speed. Valid values: 10 Mbits/s; 100 Mbits/s
INT himIPDAGenMode	1.3.6.1.4.1.4329.2.51.13.1.1.1.3	INTEGER	read-only	Indicates the bit-rate mode. Valid values: Full Duplex, Half Duplex
I32 himIPDAGenPayConn	1.3.6.1.4.1.4329.2.51.13.1.1.1.4	Integer32	read-only	TOS for VoIP payload connections to APs (CP). Valid values: 0-255
I32 himIPDAGenSigConn	1.3.6.1.4.1.4329.2.51.13.1.1.1.5	Integer32	read-only	TOS for signalling connections to APs (FA). Valid values: 0-255
himIPDAGenIPTable	1.3.6.1.4.1.4329.2.51.13.1.2		not-accessible	General IP settings that are true for all IPDAs.
himIPDAGenIPEntry	1.3.6.1.4.1.4329.2.51.13.1.2.1		not-accessible
IP himIPDAGenIPNetAddr	1.3.6.1.4.1.4329.2.51.13.1.2.1.1	IpAddress	read-only	IP net address of HiPath LAN segment.
IP himIPDAGenIPNetMask	1.3.6.1.4.1.4329.2.51.13.1.2.1.2	IpAddress	read-only	IP net mask of HiPath LAN segment.
IP himIPDAGenIPCCAAddr	1.3.6.1.4.1.4329.2.51.13.1.2.1.3	IpAddress	read-only	Address of the CC-A processor within the HiPath LAN segment.
IP himIPDAGenIPCCBAddr	1.3.6.1.4.1.4329.2.51.13.1.2.1.4	IpAddress	read-only	Address of the CC-B processor within the HiPath LAN segment. Default value: 0.0.0.0
IP himIPDAGenIPDefRoutAddr	1.3.6.1.4.1.4329.2.51.13.1.2.1.5	IpAddress	read-only	IP address of the default router within the HiPath LAN segment.
IP himIPDAGenIPSurvNetAddr	1.3.6.1.4.1.4329.2.51.13.1.2.1.6	IpAddress	read-only	The IP address of the survivability net. Default value: 0.0.0.0
himIPDAAPData	1.3.6.1.4.1.4329.2.51.13.2
himIPDABasicTable	1.3.6.1.4.1.4329.2.51.13.2.1		not-accessible	This table stores IPDA information from CM.
himIPDABasicEntry	1.3.6.1.4.1.4329.2.51.13.2.1.1		not-accessible
HIM himIPDABasicPabxId	1.3.6.1.4.1.4329.2.51.13.2.1.1.1	HimPabxId	read-only
I32 himIPDABasicLTU	1.3.6.1.4.1.4329.2.51.13.2.1.1.2	Integer32	read-only	Line/trunk unit. Valid values: 17-99
HIM himIPDABasicConnType	1.3.6.1.4.1.4329.2.51.13.2.1.1.3	HimShelfNWType	read-only	Connection type of the shelf. Valid values: APDL -- AP shelf via IP - direct linked APNW -- AP shelf via IP - network
I32 himIPDABasicBChanNo	1.3.6.1.4.1.4329.2.51.13.2.1.1.4	Integer32	read-only	Amount of B-Channels. Valid values: 1- 120
HIM himIPDABasicConvAMLaw	1.3.6.1.4.1.4329.2.51.13.2.1.1.5	HimYesNo	read-only
himIPDAIPTable	1.3.6.1.4.1.4329.2.51.13.2.2		not-accessible	This table contains the IP address configuration of the IPDAs.
himIPDAIPEntry	1.3.6.1.4.1.4329.2.51.13.2.2.1		not-accessible
IP himIPDAIPAccPtAddr	1.3.6.1.4.1.4329.2.51.13.2.2.1.1	IpAddress	read-only	IP address of the access point in the AP network.
IP himIPDAIPTAccPtAddr	1.3.6.1.4.1.4329.2.51.13.2.2.1.2	IpAddress	read-only	IP address for the TAP/Service PC link at the access point. This IP address must be in the same network as the access point in the AP network.
IP himIPDAIPAccPtRoutAddr	1.3.6.1.4.1.4329.2.51.13.2.2.1.3	IpAddress	read-only	IP address of the gateway (IP address of the router in the AP network).
IP himIPDAIPNetMaskNW	1.3.6.1.4.1.4329.2.51.13.2.2.1.4	IpAddress	read-only	Netmask of the network to which the respective Access Point in AP network belongs.
IP himIPDAIPAccPtPriRoutAddr	1.3.6.1.4.1.4329.2.51.13.2.2.1.5	IpAddress	read-only	IP address of the primary signalling router for NCUI board (IP address of the router in the HiPath 4000 LAN segment). Required if the connection type is APDL.
IP himIPDAIPNetMaskDL	1.3.6.1.4.1.4329.2.51.13.2.2.1.6	IpAddress	read-only	Netmask of the network to which the Access Point in AP internal network belongs.
himIPDALocTable	1.3.6.1.4.1.4329.2.51.13.2.3		not-accessible	This table contains the location data of the boards. It is only available for boards of type DSX, LTUCA, LTUCE and LTUCX.
himIPDALocEntry	1.3.6.1.4.1.4329.2.51.13.2.3.1		not-accessible
I32 himIPDALocId	1.3.6.1.4.1.4329.2.51.13.2.3.1.1	Integer32	read-only	Describes the location of the switch for the system configurator. Valid values: 0-999
OCT himIPDALocLoc	1.3.6.1.4.1.4329.2.51.13.2.3.1.2	OCTET STRING	read-only	Postal address of the LTU (Line/Trunk Unit) shelf. Applies to the Local Connection Type. Valid values: text, up to 45 characters
HIM himIPDALocPhoneNo	1.3.6.1.4.1.4329.2.51.13.2.3.1.3	HimPhoneNumber	read-only	Phone number at the shelf location. Valid values: 0-9, *, #, A-D, up to 22 characters
HIM himIPDALocFaxNo	1.3.6.1.4.1.4329.2.51.13.2.3.1.4	HimPhoneNumber	read-only	Fax number at the shelf location. Valid values: 0-9, *, #, A-D, up to 22 characters
himInfo	1.3.6.1.4.1.4329.2.51.14
I32 himSubagentLastMsgNo	1.3.6.1.4.1.4329.2.51.14.1	Integer32	read-only	The last message, warning or error number issued by the Him subagent.
OCT himSubagentLastMsgText	1.3.6.1.4.1.4329.2.51.14.2	OCTET STRING	read-only	The last message, warning or error text issued by the Him subagent.
I32 himResultData	1.3.6.1.4.1.4329.2.51.14.3	Integer32	read-write	Is used for agent internal communication. Contains the PabxId of a Hicom for which the last discovery process was conveyed. Is SET by the discovery agent and indicates the availability of new discovered data. The new data is to be incorporated by the subagent into the subagent's data base.
himDiscovery	1.3.6.1.4.1.4329.2.51.15
C32 himChangesEx	1.3.6.1.4.1.4329.2.51.15.1	Counter32	read-only	Indicates the number of finished HIM discoveries - corresponds to the number of hicomHWDiscovXXX traps sent out.
himDiscovTable	1.3.6.1.4.1.4329.2.51.15.2		not-accessible	The table describing the status concerning discovery of HIM information.
himDiscovEntry	1.3.6.1.4.1.4329.2.51.15.2.1		not-accessible	The entry describes the status of the discovery process. It is designed to comply with the structure of discovery entries in the hicom MIB, even though data is only provided for one switch.
HIM himDiscovPabxId	1.3.6.1.4.1.4329.2.51.15.2.1.1	HimPabxId	read-only	Unique identifier of the Hicom being discovered.
STR himDiscovPabxMnemonic	1.3.6.1.4.1.4329.2.51.15.2.1.2	DisplayString	read-only	Name of the Hicom system.
DIS himDiscovStatus	1.3.6.1.4.1.4329.2.51.15.2.1.3	DiscoveryStates	read-write	Status of discovery process. A managment station may initiate a discovery by setting this variable to value busy. The other values are set by the agent.
DIS himDiscovMode	1.3.6.1.4.1.4329.2.51.15.2.1.4	DiscoveryModes	read-write	Mode of discovery process.
STR himDiscovTimDat	1.3.6.1.4.1.4329.2.51.15.2.1.5	DisplayString	read-only	Date and time (year, month, day, hour, minute, second) the last successful discovery action was performed for the Hicom.
STR himDiscovErrTimDat	1.3.6.1.4.1.4329.2.51.15.2.1.6	DisplayString	read-only	Date and time (year, month, day, hour, minute, second) the last failed discovery action was performed for the Hicom.
himMibConformance	1.3.6.1.4.1.4329.2.51.20
himMibGroups	1.3.6.1.4.1.4329.2.51.20.1
himWelcomePageGroup	1.3.6.1.4.1.4329.2.51.20.1.1
himSwitchDataGroup	1.3.6.1.4.1.4329.2.51.20.1.2
himSpecGroup	1.3.6.1.4.1.4329.2.51.20.1.3
himSWUPeripheryGroup	1.3.6.1.4.1.4329.2.51.20.1.4
himCentralSwitchGroup	1.3.6.1.4.1.4329.2.51.20.1.5
himGeneralSwitchGroup	1.3.6.1.4.1.4329.2.51.20.1.6
himFeaturesGroup	1.3.6.1.4.1.4329.2.51.20.1.7
himAPSPatchesGroup	1.3.6.1.4.1.4329.2.51.20.1.8
himSWVersionGroup	1.3.6.1.4.1.4329.2.51.20.1.9
himSWPkgVersionGroup	1.3.6.1.4.1.4329.2.51.20.1.10
himSystemGroup	1.3.6.1.4.1.4329.2.51.20.1.11
himBoardsGroup	1.3.6.1.4.1.4329.2.51.20.1.12
himIPDAGroup	1.3.6.1.4.1.4329.2.51.20.1.13
himInfoGroup	1.3.6.1.4.1.4329.2.51.20.1.14
himDiscoveryGroup	1.3.6.1.4.1.4329.2.51.20.1.15
himTrapsGroup	1.3.6.1.4.1.4329.2.51.20.1.16
himTrapGroup	1.3.6.1.4.1.4329.2.51.21
himTrapVariables	1.3.6.1.4.1.4329.2.51.21.1
I32 himTrapPabxId	1.3.6.1.4.1.4329.2.51.21.1.1	Integer32	not-accessible	Unique identifier of a Hicom system.
STR himTrapPabxMnemonic	1.3.6.1.4.1.4329.2.51.21.1.2	DisplayString	not-accessible	Mnemonic name of the Hicom system.
himTraps	1.3.6.1.4.1.4329.2.51.21.2
NTF internalMessageHimSubagent	1.3.6.1.4.1.4329.2.51.21.2.0			An internalMessage trap contains an informational message generated by the subagent.
NTF internalWarningHimSubagent	1.3.6.1.4.1.4329.2.51.21.2.1			An internalWarning trap contains a warning message generated by a subagent.
NTF internalErrorHimSubagent	1.3.6.1.4.1.4329.2.51.21.2.2			An internalError trap contains an error message generated by a subagent. After issuing this trap, the agent terminates.
NTF himDiscovSucc	1.3.6.1.4.1.4329.2.51.21.2.10			A himDiscovSucc trap indicates the successful termination of a discovery process.
NTF himDiscovErr	1.3.6.1.4.1.4329.2.51.21.2.11			A himDiscovErr trap signifies the unsuccessful termination of a discovery process.
NTF himDiscovBusy	1.3.6.1.4.1.4329.2.51.21.2.19			A himDiscovBusy trap signifies that a sw discovery process is running.

RFC description

MIB for Siemens HP4K HIM (Intelligent Interface Module) system monitoring and management.

Start monitoring Siemens HiPath 4000 (HP4K) PBX host interface module (hardware architecture/software release identification) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SIEMENS-HP4KHIM-MIB