Description: This table is designed to show the IP addresses configuration for the QAM channels, optionally UDP port range, Program Number range associated with QAM channels. Configuring these parameters is necessary when performing session-based provisioning. A session-based provisioning request must conform to the configurations in this table. The QAM channels within an QAM device may be partitioned to support multiple UDP, QAM or ProgramNo ranges. Though it's helpful to partition the QAM channels when the total number of QAM channel increases, this is not a must. This table may also be used to show the reserved UDP ports, or program numbers for special purposes instead of using default ones allowed by hardware, software, or MPEG protocol.