-- MIB file created 17-Mar-2014 06:51:41, by
--   SMICng version 2.2.11-beta(PRO)(Solaris), January 20, 2001. Enterprise key cisco.com

SCTE-HMS-QAM-MIB DEFINITIONS ::= BEGIN

-- From file: "SCTE-HMS-QAM-MIB.my"
-- Compile options "4 7 F H N W 03 06 0B 0G 0N 0T"

IMPORTS
    enterprises
            FROM SNMPv2-SMI-v1
    entPhysicalIndex
            FROM ENTITY-MIB
    ifIndex
            FROM IF-MIB
    InetAddress, InetAddressType
            FROM INET-ADDRESS-MIB
    QAMChannelModulationFormat, QAMChannelInterleaveMode
            FROM SCTE-HMS-HEADENDIDENT-TC-MIB
    Gauge
            FROM RFC1155-SMI
    OBJECT-TYPE
            FROM RFC-1212;

heDigitalQamMIB OBJECT IDENTIFIER ::= { enterprises scteRoot(5591) scteHmsTree(1) insidePlantIdent(11) heDigital(5) heDigitalQAM(3) 1 }
-- MODULE-IDENTITY
--  LastUpdated
--    200807160305Z
--  OrgName
--    SCTE HMS Working Group
--  ContactInfo
--    SCTE HMS Subcommittee, Chairman
--    mailto:standards@scte.org 
--  Descr
--    This MIB module is for representing Edge QAM equipment present 
--                   in the headend (or indoor) and is supported by a SNMP agent.
--                   It defines QAM channel related configuration MIB objects 
--                   associated with both QAM channel's physical and logical
--                   characteristics.
--                   
--                   qamChannelTable is optional for devices that are supporting 
--                   equivalent DOCSIS MIB objects.
--    
--                   qamConfigTable is optional and applies to devices that choose to 
--                   provide logical level configuration. 
--  RevDate
--    200807160305Z
--  RevDescr
--    Updated Objects based on Comments at 7/11/08 meeting.
--    1. Made QAMChannelInterleave mode an imported enumeration and used the
--    values from the docsiFDownChannelInterleave enumeration.
--         2. Changed name of QAMModulationFormat to QAMChannelModulationFormat.
--    3. Added unknown and other to qamChannelAnnexMode
--    4. For consistency changed values names for qamChannelCommonOutputBw, 
--    qamChannelCommonUtilization to add the word Common to the names.
--       5. Changed description clause of qamConfigQamChannelIdMin and 
--           qamConfigQamChannelIdMax to reference entPhysicalIndex. 
--  RevDate
--    200804181055Z
--  RevDescr
--    Renumbered objects in qamConfigTable to remove gaps.
--  RevDate
--    200802041850Z
--  RevDescr
--    Changes based on comments, 
--    1. Changed description of qamChannelPower.
--    2. Added units to qamChannelOutputBw.
--    3. Changed Units on qamChannelUtilization to 0.1 Percent.
--  RevDate
--    200712171150Z
--  RevDescr
--    Changes based on comments, 
--    1. Removed IpAddress import.
--    2. Changed UNITS,comment, SYNTAX on qamChannelUtilization.
--  RevDate
--    200710031700Z
--  RevDescr
--    Added SCTE-HMS-HEADENDIDENT-TC name to file. Added
--    QAMModulationFormat textual convention.
--  RevDate
--    200710021200Z
--  RevDescr
--    Prepare MIB for ballot.

qamMIBObjects OBJECT IDENTIFIER ::= { heDigitalQamMIB 1 }
-- OBJECT-IDENTITY
--  Status
--    mandatory
--  Descr
--    This branch specifies the QAM MIB objects.

qamMIBConformance OBJECT IDENTIFIER ::= { heDigitalQamMIB 2 }
-- OBJECT-IDENTITY
--  Status
--    mandatory
--  Descr
--    This branch describes the different QAM MIB object groups and 
--    the different level of compliance.

qamMIBCompliances OBJECT IDENTIFIER ::= { qamMIBConformance 1 }
-- OBJECT-IDENTITY
--  Status
--    mandatory
--  Descr
--    The different levels of compliance to the QAM MIB.

qamMIBGroups OBJECT IDENTIFIER ::= { qamMIBConformance 2 }
-- OBJECT-IDENTITY
--  Status
--    mandatory
--  Descr
--    The QAM MIB object groups.

qamChannelTable OBJECT-TYPE
    SYNTAX SEQUENCE OF QamChannelEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table describes the configuration and attributes of each
        QAM channel of the QAM designated by ifIndex."
    ::= { qamMIBObjects 1 }

qamChannelEntry OBJECT-TYPE
    SYNTAX QamChannelEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "There is an entry in the table for each QAM channel. The index 
        to this table is the ifIndex of each QAM channel."
    INDEX { ifIndex }
    ::= { qamChannelTable 1 }

QamChannelEntry ::= SEQUENCE {
    qamChannelFrequency Gauge,
    qamChannelModulationFormat QAMChannelModulationFormat,
    qamChannelInterleaverLevel INTEGER,
    qamChannelInterleaverMode QAMChannelInterleaveMode,
    qamChannelPower INTEGER,
    qamChannelSquelch INTEGER,
    qamChannelContWaveMode INTEGER,
    qamChannelAnnexMode INTEGER
    }

qamChannelFrequency OBJECT-TYPE
    SYNTAX Gauge
--  Units
--    Hertz
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The center frequency of the QAM channel."
    ::= { qamChannelEntry 1 }

qamChannelModulationFormat OBJECT-TYPE
    SYNTAX QAMChannelModulationFormat
--    Rsyntax INTEGER {
--        unknown(1),
--        other(2),
--        qam64(3),
--        qam256(4),
--        qam128(5),
--        qam512(6),
--        qam1024(7)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "RF Modululation for this output QAM channel when 
        qamChannelContWaveMode is off."
    ::= { qamChannelEntry 2 }

qamChannelInterleaverLevel OBJECT-TYPE
    SYNTAX INTEGER {
        level1(1),
        level2(2)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The interleaver level for FEC coding. 
        
        level1 - implies interleaver level 1
        level2 - implies interleaver level 2
        
        This object is only valid when AnnexMode has the value annexB."
    ::= { qamChannelEntry 3 }

qamChannelInterleaverMode OBJECT-TYPE
    SYNTAX QAMChannelInterleaveMode
--    Rsyntax INTEGER {
--        unknown(1),
--        other(2),
--        fecI8J16(3),
--        fecI16J8(4),
--        fecI32J4(5),
--        fecI64J2(6),
--        fecI128J1(7),
--        fecI12J17(8),
--        fecI128J2(9),
--        fecI128J3(10),
--        fecI128J4(11),
--        fecI128J5(12),
--        fecI128J6(13),
--        fecI128J7(14),
--        fecI128J8(15)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The interleaving depth or operation mode of the interleaver.  
          'taps8Increment16':   protection 5.9/4.1 usec,
                                          latency .22/.15 msec
          'taps16Increment8':   protection 12/8.2 usec,
                                 latency .48/.33 msec
          'taps32Increment4':   protection 24/16 usec,
                                 latency .98/.68 msec
          'taps64Increment2':   protection 47/33 usec,
                                 latency 2/1.4 msec
          'taps128Increment1':  protection 95/66 usec,
                                 latency 4/2.8 msec
          'taps12increment17':  protection 18/14 usec,
                                 latency 0.43/0.32 msec
          'taps128increment2':  protection 190/132 usec,
                                 latency 8/5.6 msec
          'taps128increment3': protection 285/198 usec,
                                 latency 12/8.4 msec
          'taps128increment4': protection 380/264 usec,
                                 latency 16/11 msec
          'taps128increment5': protection 475/330 usec,
                                 latency 20/14 msec
          'taps128increment6': protection 570/396 usec,
                                 latency 24/17 msec
          'taps128increment7: protection 664/462 usec,
                                 latency 28/20 msec
          'taps128increment8': protection 759/528 usec,
                                 latency 32/22 msec
          
          The value 'taps12increment17' is supported by EuroDOCSIS
          cable systems only, and the others by DOCSIS cable systems.
        
          If the QAM chammel interface is down, this object either 
          returns the configured value,
          or the value of 'unknown'.
          The value of 'other' is returned if the interleave
          is known but not defined in the above list.
          
          When the qamChannelInterleaverLevel is set to 'level 1', a 
        single interleaving depth is supported, namely 'taps128Increment1'.
        
        When the qamChannelInterleaverLevel is set to 'level2', all the 
        other interleaving depths are also supported."
    REFERENCE
        "ITU-T J.83 Annex B."
    ::= { qamChannelEntry 4 }

qamChannelPower OBJECT-TYPE
    SYNTAX INTEGER
--  Units
--    0.1 dBmV
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The output power of the QAM channel. If the QAM channel is muted,
        value is not valid."
    ::= { qamChannelEntry 5 }

qamChannelSquelch OBJECT-TYPE
    SYNTAX INTEGER {
        unmuted(1),
        muted(2)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates whether the QAM port is muted or not."
    ::= { qamChannelEntry 6 }

qamChannelContWaveMode OBJECT-TYPE
    SYNTAX INTEGER {
        cwmOff(1),
        cwmOn(2)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Indicates whether Continuous Wave mode is enabled or not for
        output."
    ::= { qamChannelEntry 7 }

qamChannelAnnexMode OBJECT-TYPE
    SYNTAX INTEGER {
        unknown(1),
        other(2),
        annexA(3),
        annexB(4),
        annexC(5)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Specifies the ITU-T standard supported by the QAM channel
        
        annexA - standard specified by Annex A of ITU-T J.83
        annexB - standard specified by Annex B of ITU-T J.83
        annexC - standard specified by Annex C of ITU-T J.83
        Other  - other standard that may apply."
    ::= { qamChannelEntry 8 }

qamChannelCommonTable OBJECT-TYPE
    SYNTAX SEQUENCE OF QamChannelCommonEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table decribes MPEG and DOCSIS characteristics that are
        not part of the DOCSIS-IF-MIB."
    ::= { qamMIBObjects 2 }

qamChannelCommonEntry OBJECT-TYPE
    SYNTAX QamChannelCommonEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each entry of this table describes attributes of an RF channel
        for both MPEG and DOCSIS QAMs."
    INDEX { ifIndex }
    ::= { qamChannelCommonTable 1 }

QamChannelCommonEntry ::= SEQUENCE {
    qamChannelCommonOutputBw INTEGER,
    qamChannelCommonUtilization INTEGER
    }

qamChannelCommonOutputBw OBJECT-TYPE
    SYNTAX INTEGER
--  Units
--    bps
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The QAM channel output bandwidth or capacity."
    ::= { qamChannelCommonEntry 1 }

qamChannelCommonUtilization OBJECT-TYPE
    SYNTAX INTEGER(-1|0..1000)
--  Units
--    0.1 Percent
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The utilization of the QAM channel in 0.1 percentage.
        This rate may be calculated as transport stream packets / 
        ( transport stream packets + null packets ). If not 
                  applicable, a value of -1 is returned."
    ::= { qamChannelCommonEntry 2 }

qamConfigTable OBJECT-TYPE
    SYNTAX SEQUENCE OF QamConfigEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "This table is designed to show the IP addresses configuration
        for the QAM channels, optionally UDP port range, Program Number
        range associated with QAM channels. Configuring these parameters
        is necessary when performing session-based provisioning. A  
        session-based provisioning request must conform to the
        configurations in this table. The QAM channels within an QAM 
        device may be partitioned to support multiple UDP, QAM or
        ProgramNo ranges. Though it's helpful to partition the QAM
        channels when the total number of QAM channel increases, this is
        not a must. This table may also be used to show the reserved UDP
        ports, or program numbers for special purposes instead of using
        default ones allowed by hardware, software, or MPEG protocol."
    ::= { qamMIBObjects 3 }

qamConfigEntry OBJECT-TYPE
    SYNTAX QamConfigEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each entry corresponds to the configuration of a QAM channel
        range."
    INDEX { entPhysicalIndex, qamConfigIndex }
    ::= { qamConfigTable 1 }

QamConfigEntry ::= SEQUENCE {
    qamConfigIndex Gauge,
    qamConfigQamChannelIdMin INTEGER,
    qamConfigQamChannelIdMax INTEGER,
    qamConfigIPAddrType InetAddressType,
    qamConfigIPAddr InetAddress,
    qamConfigUdpPortRangeMin INTEGER,
    qamConfigUdpPortRangeMax INTEGER,
    qamConfigOutputProgNoMin INTEGER,
    qamConfigOutputProgNoMax INTEGER
    }

qamConfigIndex OBJECT-TYPE
    SYNTAX Gauge
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "The table index."
    ::= { qamConfigEntry 1 }

qamConfigQamChannelIdMin OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "QAMChannelId maybe within a line card or global depending on
        entPhysicalIndex."
    DEFVAL { 1 }
    ::= { qamConfigEntry 2 }

qamConfigQamChannelIdMax OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "QAMChannelId maybe within a line card or global depending on
        entPhysicalIndex."
    ::= { qamConfigEntry 3 }

qamConfigIPAddrType OBJECT-TYPE
    SYNTAX InetAddressType
--    Rsyntax INTEGER {
--        ?? enum value of zero may cause problems
--        unknown(0),
--        ipv4(1),
--        ipv6(2),
--        ipv4z(3),
--        ipv6z(4),
--        dns(16)
--        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The type of the program destination address as defined by 
        inetAddressType. The default value is 1 for ipv4(1)"
    DEFVAL { ipv4 }
    ::= { qamConfigEntry 4 }

qamConfigIPAddr OBJECT-TYPE
    SYNTAX InetAddress
--    Rsyntax OCTET STRING(SIZE(0..255))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "IP address of the QAM channel."
    ::= { qamConfigEntry 5 }

qamConfigUdpPortRangeMin OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The lowest UDP port of the UDP port range that can be used
        on this QAM channel."
    ::= { qamConfigEntry 6 }

qamConfigUdpPortRangeMax OBJECT-TYPE
    SYNTAX INTEGER(0..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The highest UDP port of the UDP port range that can be used on
        this QAM channel."
    ::= { qamConfigEntry 7 }

qamConfigOutputProgNoMin OBJECT-TYPE
    SYNTAX INTEGER(1..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The lowest MPEG output program number that can be used on the
        QAM channel."
    DEFVAL { 1 }
    ::= { qamConfigEntry 8 }

qamConfigOutputProgNoMax OBJECT-TYPE
    SYNTAX INTEGER(1..65535)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The highest MPEG output program number that can be used on the
        QAM channel."
    DEFVAL { 255 }
    ::= { qamConfigEntry 9 }

qamMpegDocsisCommonGroup OBJECT IDENTIFIER ::= { qamMIBGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    These objects are not covered by any DOCSIS MIB. It is
--    legitimate for a DOCSIS QAM to support them.
--  objects
--    qamChannelCommonOutputBw, qamChannelCommonUtilization

qamChannelGroup OBJECT IDENTIFIER ::= { qamMIBGroups 2 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    The objects characterizing the RF channel and that may be
--    supported by an equivalent DOCSIS MIB object.
--  objects
--    qamChannelFrequency, qamChannelModulationFormat, 
--    qamChannelInterleaverLevel, qamChannelInterleaverMode, 
--    qamChannelPower, qamChannelSquelch, qamChannelContWaveMode, 
--    qamChannelAnnexMode

qamConfigGroup OBJECT IDENTIFIER ::= { qamMIBGroups 3 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    QAM configuration objects.
--  objects
--    qamConfigQamChannelIdMin, qamConfigQamChannelIdMax, 
--    qamConfigIPAddrType, qamConfigIPAddr, 
--    qamConfigUdpPortRangeMin, qamConfigUdpPortRangeMax, 
--    qamConfigOutputProgNoMin, qamConfigOutputProgNoMax

qamSupport OBJECT IDENTIFIER ::= { qamMIBCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    These objects describe the support level for QAM.
--  Module
--    >>current<<
--   MandGroup
--    qamChannelGroup
--   OptGroup
--    qamConfigGroup

docsisSupport OBJECT IDENTIFIER ::= { qamMIBCompliances 2 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    These objects are not covered by any DOCSIS MIB, but
--    they would need to be supported by a DOCSIS EQAM.
--  Module
--    >>current<<
--   MandGroup
--    qamMpegDocsisCommonGroup


END