SALIX-SYSTEM-MIB :: salixSysSyncTimingMode

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SALIX-SYSTEM-MIB › salixSysSyncTimingMode

salixSysSyncTimingMode

Module: SALIX-SYSTEM-MIB

OID (symbolic): SALIX-SYSTEM-MIB::salixSysSyncTimingMode

OID (numeric): 1.3.6.1.4.1.2158.2.3.1.5.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: An identification of the source from which timing is derived by the working sync module. Possible values are:

internal(1) - the internal oscillator on the sync module will be used as the master clock for system synchronization. line(2) - the sync module is synchronizing with the receive line timing from a signal received by an LIU. external(3) - an external timing interface will be used as the master clock for system sychronization.

What is salixSysSyncTimingMode?

Sets the source of system synchronization timing: internal(1) uses the sync module's own oscillator, line(2) recovers timing from a received line signal via an LIU, or external(3) uses an external timing interface; defaults to internal. An admin selects line or external mode when the device needs to synchronize its clock to a network reference rather than free-running internally.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2158.2.3.1.5.1
snmpwalk -v2c -c public <target> SALIX-SYSTEM-MIB::salixSysSyncTimingMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2158.2.3.1.5.1.1
snmpget -v2c -c public <target> SALIX-SYSTEM-MIB::salixSysSyncTimingMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2158.2.3.1.5.1.1 i <value>

Start monitoring SALIX Technologies media gateway/integrated access device (system error/status reporting) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SALIX-SYSTEM-MIB::salixSysSyncTimingMode OID value, configure state conditions and alerts, and monitor any SALIX Technologies media gateway/integrated access device (system error/status reporting) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2158salixTechnologiesSALIX-MIB
1.3.6.1.4.1.2158.2salixGenericSALIX-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2158.2.3salixSystemMIBSALIX-SYSTEM-MIB
1.3.6.1.4.1.2158.2.3.1salixSystemMIBObjectsSALIX-SYSTEM-MIB
1.3.6.1.4.1.2158.2.3.1.5salixSystemSyncSALIX-SYSTEM-MIB
1.3.6.1.4.1.2158.2.3.1.5.1salixSysSyncTimingModeSALIX-SYSTEM-MIB