All MIBs › SALIX-SYSTEM-MIB › salixSysSyncSecondaryRefState
salixSysSyncSecondaryRefState
Module: SALIX-SYSTEM-MIB
OID (symbolic): SALIX-SYSTEM-MIB::salixSysSyncSecondaryRefState
OID (numeric): 1.3.6.1.4.1.2158.2.3.1.5.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This variable indicates the state of the secondary reference line termination point to be used as a timing source by the sync module. This object is relevant if the 'salixSysSyncTimingMode' is set to 'line' and the 'salixSysSyncPrimaryRef' is configured.
unknown(0) - the state of the line has not been determined. valid(1) - the line is operating within frequency specification. lossOfSignalError - loss of signal was detected from the line and has failed the health check. frequencyOffsetError - frequency errors were detected from the line and has failed the health check
What is salixSysSyncSecondaryRefState?
Reports the health of the secondary reference line: unknown(0), valid(1), lossOfSignalError(2), or frequencyOffsetError(3); relevant when timing mode is line and a primary reference is configured. An admin checks this to confirm the backup timing reference is actually healthy before relying on it as a failover.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2158.2.3.1.5.12 snmpwalk -v2c -c public <target> SALIX-SYSTEM-MIB::salixSysSyncSecondaryRefState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2158.2.3.1.5.12.1 snmpget -v2c -c public <target> SALIX-SYSTEM-MIB::salixSysSyncSecondaryRefState.1
Start monitoring SALIX Technologies media gateway/integrated access device (system error/status reporting) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SALIX-SYSTEM-MIB::salixSysSyncSecondaryRefState OID value, configure state conditions and alerts, and monitor any SALIX Technologies media gateway/integrated access device (system error/status reporting) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2158 | salixTechnologies | SALIX-MIB |
| 1.3.6.1.4.1.2158.2 | salixGeneric | SALIX-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2158.2.3 | salixSystemMIB | SALIX-SYSTEM-MIB |
| 1.3.6.1.4.1.2158.2.3.1 | salixSystemMIBObjects | SALIX-SYSTEM-MIB |
| 1.3.6.1.4.1.2158.2.3.1.5 | salixSystemSync | SALIX-SYSTEM-MIB |
| 1.3.6.1.4.1.2158.2.3.1.5.12 | salixSysSyncSecondaryRefState | SALIX-SYSTEM-MIB |