All MIBs › SALIX-SYSTEM-MIB › salixSysSyncRevertiveSwitch
salixSysSyncRevertiveSwitch
Module: SALIX-SYSTEM-MIB
OID (symbolic): SALIX-SYSTEM-MIB::salixSysSyncRevertiveSwitch
OID (numeric): 1.3.6.1.4.1.2158.2.3.1.5.4
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Indication of whether or not the active interface for deriving timing should revert to the interface defined by the primary reference line 'salixSysSyncPrimaryRef' if the primary becomes available after a failure is cleared. This object is only valid if the 'salixSysSyncTimingMode' is configured as 'line' or 'external'.
true(1) - reference switching is revertive false(2) - reference switching is non-revertive
What is salixSysSyncRevertiveSwitch?
Indicates whether the active timing reference should automatically revert to the primary (salixSysSyncPrimaryRef) once it becomes available again after a failure clears; only relevant when the timing mode is line or external, and defaults to false (non-revertive). An admin enables this if they want the system to always prefer the primary reference once it's healthy again, rather than staying on the secondary.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2158.2.3.1.5.4 snmpwalk -v2c -c public <target> SALIX-SYSTEM-MIB::salixSysSyncRevertiveSwitch
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2158.2.3.1.5.4.1 snmpget -v2c -c public <target> SALIX-SYSTEM-MIB::salixSysSyncRevertiveSwitch.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2158.2.3.1.5.4.1 s <value>
Start monitoring SALIX Technologies media gateway/integrated access device (system error/status reporting) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SALIX-SYSTEM-MIB::salixSysSyncRevertiveSwitch OID value, configure state conditions and alerts, and monitor any SALIX Technologies media gateway/integrated access device (system error/status reporting) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2158 | salixTechnologies | SALIX-MIB |
| 1.3.6.1.4.1.2158.2 | salixGeneric | SALIX-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2158.2.3 | salixSystemMIB | SALIX-SYSTEM-MIB |
| 1.3.6.1.4.1.2158.2.3.1 | salixSystemMIBObjects | SALIX-SYSTEM-MIB |
| 1.3.6.1.4.1.2158.2.3.1.5 | salixSystemSync | SALIX-SYSTEM-MIB |
| 1.3.6.1.4.1.2158.2.3.1.5.4 | salixSysSyncRevertiveSwitch | SALIX-SYSTEM-MIB |