SALIX-RADIUS-MIB

All MIBs › SALIX-RADIUS-MIB

Organization: SALIX Technologies

Last Updated: 2000-04-05

Category: SALIX Technologies Media Gateway, SIP and VoIP Protocol, VoIP and Media Gateway

Description: Manages SALIX Technologies RADIUS authentication server configuration and accounting parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SALIX-RADIUS-MIB?

SALIX-RADIUS-MIB is a vendor-specific SNMP module from SALIX Technologies that supplements the standard RADIUS authentication client MIB (RFC 2618) with additional objects specific to SALIX's integrated access/gateway products. Only the object-group and compliance-statement subtree (salixRadiusGroups, salixRadiusCompliances) was captured in this extract, so the specific RADIUS-related configuration or accounting objects are defined elsewhere in the module. Where populated, such objects would typically expose RADIUS server configuration and authentication activity, letting an admin confirm a device's AAA subsystem — a software/service-status concern — is functioning correctly. It has an explicit dependency on RFC 2618 (RADIUS Authentication Client MIB), which it extends rather than replaces. It is deployed on SALIX access gateways at network edges where RADIUS is used for subscriber or administrative authentication. Engineers can download the SALIX-RADIUS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SALIX-RADIUS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

SALIX Technologies access gateway/media gateway

Monitoring Examples

The sampled objects for this module are limited to its conformance definitions, salixRadiusGroups and salixRadiusCompliances, which specify which object groups an agent must support; no runtime RADIUS objects were present in the extract to build a concrete polling scenario from. In deployment, the underlying (unsampled) objects referenced by these groups would let an admin confirm RADIUS server configuration and authentication activity on a SALIX gateway beyond what RFC 2618 alone covers.

Imported Objects

From ATM-FORUM-M4-MIB

atmfM4TrapAlarmSeverity

OBJECT-TYPE

From SALIX-MIB

salixGeneric

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
salixRadiusMIB	1.3.6.1.4.1.2158.2.8			This MIB describes objects relating to RADIUS protocol support in SALIX products that is not described in RFC 2618.
salixRadiusMIBObjects	1.3.6.1.4.1.2158.2.8.1
salixRadiusServerConfigTable	1.3.6.1.4.1.2158.2.8.1.1		not-accessible	The RADIUS server configuration table. This table provides a mechanism for configuring RADIUS servers.
salixRadiusServerConfigEntry	1.3.6.1.4.1.2158.2.8.1.1.1		not-accessible	An entry in the salixRadiusServerConfigTable that identifies the parameters necessary to download announcements to the system.
INT salixRadiusServerIndex	1.3.6.1.4.1.2158.2.8.1.1.1.1	INTEGER	read-only	The unique index for the RADIUS server. Servers are queried in order. E.g. the server at index 1 is tried first and if it times out, the server at index 2 tried.
IP salixRadiusServerIpAddress	1.3.6.1.4.1.2158.2.8.1.1.1.2	IpAddress	read-write	The IP address of the RADIUS server.
INT salixRadiusServerUdpPort	1.3.6.1.4.1.2158.2.8.1.1.1.3	INTEGER	read-write	The UDP port number that the RADIUS server listens on for Access-Requests.
OCT salixRadiusServerSharedSecret	1.3.6.1.4.1.2158.2.8.1.1.1.4	OCTET STRING	read-write	The shared secret that will be used when communicating with this server. For security reasons, reading this field will return an empty string.
T/F salixRadiusServerEnabled	1.3.6.1.4.1.2158.2.8.1.1.1.5	TruthValue	read-write	This value indicates whether requests should be sent to this server.
INT salixUserAuthenticationMethod	1.3.6.1.4.1.2158.2.8.1.2	INTEGER	read-write	The user authentication method for all logins into the system. The following choices are available: internal(0) - The system stores the username/password pairs in its nonvolatile memory. radius(1) - Authenticate using the RADIUS protocol. tacacs(2) - Authenticate using TACACS protocol. xtacacs(3) - Authenticate using the XTACACS protocol. tacacsplus(4) - Authenticate using the TACACS+ protocol.
salixRadiusMIBTraps	1.3.6.1.4.1.2158.2.8.2
salixRadiusMIBTrapPrefix	1.3.6.1.4.1.2158.2.8.2.0
NTF salixRadiusAccessRequestTimeout	1.3.6.1.4.1.2158.2.8.2.0.1			Indicates that an Access Request to the specified server has timed out. The default alarm severity for this alarm is 'minor'.
NTF salixRadiusAccessDenied	1.3.6.1.4.1.2158.2.8.2.0.2			Indicates that a login attempt was denied by the specified server. This could be due to someone trying to gain unauthorized access or due to a misconfiguration of the server. The default alarm severity for this alarm is 'minor'.
salixRadiusMIBCompliance	1.3.6.1.4.1.2158.2.8.3
salixRadiusGroups	1.3.6.1.4.1.2158.2.8.3.1
salixRadiusGroup	1.3.6.1.4.1.2158.2.8.3.1.1			Salix RADIUS Objects Group
salixRadiusCompliances	1.3.6.1.4.1.2158.2.8.3.2
salixRadiusCompliance	1.3.6.1.4.1.2158.2.8.3.2.1			The basic implementation requirements for the SALIX-RADIUS-MIB.

RFC description

Manages RADIUS server configuration and authentication traps for SALIX telephony products.

Start monitoring SALIX Technologies access gateway/media gateway (RADIUS AAA extension objects) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SALIX-RADIUS-MIB

What Is SALIX-RADIUS-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description