All MIBs › SALIX-HNE-MIB › hneSysSyncSecondaryRefLineState
hneSysSyncSecondaryRefLineState
Module: SALIX-HNE-MIB
OID (symbolic): SALIX-HNE-MIB::hneSysSyncSecondaryRefLineState
OID (numeric): 1.3.6.1.4.1.2158.3.1.1.1.1.2.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This variable indicates the state of the secondary reference line termination point (SONET line) to be used as a timing source by the sync module. This object is relevant if the 'hneSysSyncTimingMode' is set to 'line' and the 'hneSysSyncPrimaryRefLine' is configured.
unknown(0) - the state of the line has not been determined. valid(1) - the line is operating within frequency specification. lossOfSignalError - loss of signal was detected from the line and has failed the health check. frequencyOffsetError - frequency errors were detected from the line and has failed the health check
What is hneSysSyncSecondaryRefLineState?
Read-only enum reporting the health of the secondary reference line used for timing, mirroring hneSysSyncPrimaryRefLineState's values (unknown, valid, lossOfSignalError, frequencyOffsetError). Check this to confirm the backup timing reference is actually usable before relying on automatic failover.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2158.3.1.1.1.1.2.12 snmpwalk -v2c -c public <target> SALIX-HNE-MIB::hneSysSyncSecondaryRefLineState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2158.3.1.1.1.1.2.12.1 snmpget -v2c -c public <target> SALIX-HNE-MIB::hneSysSyncSecondaryRefLineState.1
Start monitoring SALIX Technologies network/telecom access equipment (Host Network Element identification/config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SALIX-HNE-MIB::hneSysSyncSecondaryRefLineState OID value, configure state conditions and alerts, and monitor any SALIX Technologies network/telecom access equipment (Host Network Element identification/config) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2158 | salixTechnologies | SALIX-MIB |
| 1.3.6.1.4.1.2158.3 | salixProducts | SALIX-MIB |
| 1.3.6.1.4.1.2158.3.1 | hybridSwitch | SALIX-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2158.3.1.1 | hneMIB | SALIX-HNE-MIB |
| 1.3.6.1.4.1.2158.3.1.1.1 | hneMIBObjects | SALIX-HNE-MIB |
| 1.3.6.1.4.1.2158.3.1.1.1.1 | hneSystem | SALIX-HNE-MIB |
| 1.3.6.1.4.1.2158.3.1.1.1.1.2 | hneSystemSync | SALIX-HNE-MIB |
| 1.3.6.1.4.1.2158.3.1.1.1.1.2.12 | hneSysSyncSecondaryRefLineState | SALIX-HNE-MIB |