All MIBs › RUCKUS-WLAN-MIB › ruckusWLANOperationalRateSet
ruckusWLANOperationalRateSet
Module: RUCKUS-WLAN-MIB
OID (symbolic): RUCKUS-WLAN-MIB::ruckusWLANOperationalRateSet
OID (numeric): 1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.4
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value representing a rate. Each rate shall be within the range from 2 to 127, corresponding to data rates in increments of 500 kb/s from 1 Mb/s to 63.5 Mb/s, and shall be supported (as indicated in the supported rates table) for receiving data. This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames, and is used to determine whether a BSS with which the station desires to synchronize is suitable. It is also used when starting a BSS, as specified in 10.3.
What is ruckusWLANOperationalRateSet?
The set of data rates, in 500 kbps units, this WLAN supports and advertises in Beacon/Probe/Association frames; a device deciding whether to associate compares its own rate set against this to confirm compatibility.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.4 snmpwalk -v2c -c public <target> RUCKUS-WLAN-MIB::ruckusWLANOperationalRateSet
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.4.1 snmpget -v2c -c public <target> RUCKUS-WLAN-MIB::ruckusWLANOperationalRateSet.1
Start monitoring Ruckus Wireless access point, Ruckus WLAN controller (ZoneDirector/SmartZone) (SSID/BSS configuration/status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RUCKUS-WLAN-MIB::ruckusWLANOperationalRateSet OID value, configure state conditions and alerts, and monitor any Ruckus Wireless access point, Ruckus WLAN controller (ZoneDirector/SmartZone) (SSID/BSS configuration/status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25053 | ruckusRootMIB | RUCKUS-ROOT-MIB |
| 1.3.6.1.4.1.25053.1 | ruckusObjects | RUCKUS-ROOT-MIB |
| 1.3.6.1.4.1.25053.1.1 | ruckusCommon | RUCKUS-ROOT-MIB |
| 1.3.6.1.4.1.25053.1.1.6 | ruckusCommonWLANModule | RUCKUS-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25053.1.1.6.1 | ruckusWLANMIB | RUCKUS-WLAN-MIB |
| 1.3.6.1.4.1.25053.1.1.6.1.1 | ruckusWLANObjects | RUCKUS-WLAN-MIB |
| 1.3.6.1.4.1.25053.1.1.6.1.1.1 | ruckusWLANInfo | RUCKUS-WLAN-MIB |
| 1.3.6.1.4.1.25053.1.1.6.1.1.1.1 | ruckusWLANTable | RUCKUS-WLAN-MIB |
| 1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1 | ruckusWLANEntry | RUCKUS-WLAN-MIB |
| 1.3.6.1.4.1.25053.1.1.6.1.1.1.1.1.4 | ruckusWLANOperationalRateSet | RUCKUS-WLAN-MIB |