vlProto
Module: RND-MIB
OID (symbolic): RND-MIB::vlProto
OID (numeric): 1.3.6.1.4.1.89.27.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The protocol, supported by this VL. The meanings of the values are: other: none of the following. This VL includes any protocol except the following protocols. It is a bridging VL. RS relies on a third-party router to exchange traffic between nodes on different virtual LANs of this type. IP: This is a routing VL, RS will route between nodes on different virtual LANs. IPmulticast: RS will broadcast the message to all the VL's ports. Used for video-conferencing applications. ipxRaw: This is a Routing VL, RS will route between nodes on different virtual LANs. ipxET: This is a routing VL, RS will route between nodes on different virtual LANs. ipxLLC: This is a routing VL, RS will route between nodes on different virtual LANs. ipxSNAP: This is a routing VL, RS will route between nodes on different virtual LANs. decNET: This is a bridging VL, RS relies on a third-party router to exchange traffic between nodes on different DECnet virtual LANs of this type. netBios: This is a Bridging VL, RS relies on a third-party router to exchange traffic between nodes on different NetBIOS virtual LANs of this type. appleTalk: This is a bridging VL, RS relies on a third-party router to exchange traffic between nodes on different AppleTalk virtual LANs of this type.
What is vlProto?
Selects which protocol this virtual LAN carries and how the device handles it: 'other' or the various layer-2 protocol types make it a bridging VL where a third-party router handles inter-VLAN traffic, while ip/ipxRaw/ipxET/ipxLLC/ipxSNAP make it a routing VL where the device itself routes between different VLANs of that type, and ipmulticast broadcasts to all the VL's ports for uses like video conferencing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.89.27.1.1.2 snmpwalk -v2c -c public <target> RND-MIB::vlProto
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.89.27.1.1.2.1 snmpget -v2c -c public <target> RND-MIB::vlProto.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.89.27.1.1.2.1 i <value>
Start monitoring RAD Data Communications network access devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RND-MIB::vlProto OID value, configure state conditions and alerts, and monitor any RAD Data Communications network access devices from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.89 | rnd | Dell-MIB |
| 1.3.6.1.4.1.89.27 | virtualLan | RADWARE-MIB |
| 1.3.6.1.4.1.89.27.1 | virtualLanTable | RADWARE-MIB |
| 1.3.6.1.4.1.89.27.1.1 | virtualLanEntry | RADWARE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.89.27.1.1.2 | vlProto | RND-MIB |