RND-MIB :: rndIfCompressionStatus

MIB Reference — IPNetwork Monitor · Updated September 26, 2026

All MIBs › RND-MIB › rndIfCompressionStatus

rndIfCompressionStatus

Module: RND-MIB

OID (symbolic): RND-MIB::rndIfCompressionStatus

OID (numeric): 1.3.6.1.4.1.89.4.1.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Defines the status of the compression component: not-inserted - Compression component is not in the device active - Compression is enabled and operates correctly not-active - Compression is enables but does not operate. The reason may be that there is no compression component on the device connected to this interface. disabled - Compression was disabled by management, using variable rndCompression.

What is rndIfCompressionStatus?

Reports the actual state of the compression feature on this interface: not-inserted (no compression hardware present), active (working correctly), not-active (enabled but the far-end device lacks compression hardware so it isn't actually running), or disabled (turned off via rndIfCompression). An admin checks this when rndIfCompressionRate stays at zero despite compression being enabled.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.89.4.1.1.9
snmpwalk -v2c -c public <target> RND-MIB::rndIfCompressionStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.89.4.1.1.9.1
snmpget -v2c -c public <target> RND-MIB::rndIfCompressionStatus.1

Start monitoring RAD Data Communications network access devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RND-MIB::rndIfCompressionStatus OID value, configure state conditions and alerts, and monitor any RAD Data Communications network access devices from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.89rndDell-MIB
1.3.6.1.4.1.89.4rndInterfaceRADWARE-MIB
1.3.6.1.4.1.89.4.1rndIfTableRADWARE-MIB
1.3.6.1.4.1.89.4.1.1rndIfEntryRADWARE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.89.4.1.1.9rndIfCompressionStatusRND-MIB