All MIBs › RND-MIB › rndIfBaudRate
rndIfBaudRate
Module: RND-MIB
OID (symbolic): RND-MIB::rndIfBaudRate
OID (numeric): 1.3.6.1.4.1.89.4.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Defines the baud rate of use by the interface. The valid rates are determined by the type of the media for which this baud rate is defined.
What is rndIfBaudRate?
Sets the serial line baud rate used by this interface; the valid values depend on the physical media type of the port, so an admin must match this to whatever line rate the connected circuit or modem actually supports.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.89.4.1.1.6 snmpwalk -v2c -c public <target> RND-MIB::rndIfBaudRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.89.4.1.1.6.1 snmpget -v2c -c public <target> RND-MIB::rndIfBaudRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.89.4.1.1.6.1 i <value>
Start monitoring RAD Data Communications network access devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RND-MIB::rndIfBaudRate OID value, configure state conditions and alerts, and monitor any RAD Data Communications network access devices from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.89 | rnd | Dell-MIB |
| 1.3.6.1.4.1.89.4 | rndInterface | RADWARE-MIB |
| 1.3.6.1.4.1.89.4.1 | rndIfTable | RADWARE-MIB |
| 1.3.6.1.4.1.89.4.1.1 | rndIfEntry | RADWARE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.89.4.1.1.6 | rndIfBaudRate | RND-MIB |