RIVERSTONE-CONFIG-MIB :: rsCfgMaxActiveChangeLines

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › RIVERSTONE-CONFIG-MIB › rsCfgMaxActiveChangeLines

rsCfgMaxActiveChangeLines

Module: RIVERSTONE-CONFIG-MIB

OID (symbolic): RIVERSTONE-CONFIG-MIB::rsCfgMaxActiveChangeLines

OID (numeric): 1.3.6.1.4.1.5567.2.20.2.5

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: Denotes the maximum number of lines allowed in the whole log. If the maximum number is reached, the lines of the older sessions will be deleted (one session at a time), to accommodate the lines of the new session. If this maximum limit is less than the affected lines in a change, the lines are not stored in the Change table. There will only be an entry in the session table. So make sure that this number is large enough. Higher this value, the memory consumption is also high.

What is rsCfgMaxActiveChangeLines?

Caps the total number of lines kept across the whole change log; once the cap is hit, whole older sessions are dropped to make room for new ones, so set it high enough for your needs while weighing the memory cost.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5567.2.20.2.5
snmpwalk -v2c -c public <target> RIVERSTONE-CONFIG-MIB::rsCfgMaxActiveChangeLines

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5567.2.20.2.5.1
snmpget -v2c -c public <target> RIVERSTONE-CONFIG-MIB::rsCfgMaxActiveChangeLines.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5567.2.20.2.5.1 i <value>

Start monitoring Riverstone Networks RS-series routers (SNMP-based configuration file save/restore/transfer) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RIVERSTONE-CONFIG-MIB::rsCfgMaxActiveChangeLines OID value, configure state conditions and alerts, and monitor any Riverstone Networks RS-series routers (SNMP-based configuration file save/restore/transfer) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5567riverstoneNetworksRIVERSTONE-SMI-MIB
1.3.6.1.4.1.5567.2riverstoneMibsRIVERSTONE-SMI-MIB
Numeric OIDNameModule
1.3.6.1.4.1.5567.2.20rsConfigMIBRIVERSTONE-CONFIG-MIB
1.3.6.1.4.1.5567.2.20.2rsCfgChangeLogsRIVERSTONE-CONFIG-MIB
1.3.6.1.4.1.5567.2.20.2.5rsCfgMaxActiveChangeLinesRIVERSTONE-CONFIG-MIB