All MIBs › RIELLOUPS-MIB › rupsTestResultsSummary
rupsTestResultsSummary
Module: RIELLOUPS-MIB
OID (symbolic): RIELLOUPS-MIB::rupsTestResultsSummary
OID (numeric): 1.3.6.1.4.1.5491.10.1.7.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The results of the current or last UPS diagnostics test performed. The values for donePass(1), doneWarning(2), and doneError(3) indicate that the test completed either successfully, with a warning, or with an error, respectively. The value aborted(4) is returned for tests which are aborted by setting the value of upsTestId to upsTestAbortTestInProgress. Tests which have not yet concluded are indicated by inProgress(5). The value noTestsInitiated(6) indicates that no previous test results are available, such as is the case when no tests have been run since the last reinitialization of the network management subsystem and the system has no provision for non- volatile storage of test results.
What is rupsTestResultsSummary?
This reports the outcome of the current or most recent UPS diagnostic test: passed, passed with warning, error, aborted, still in progress, or no tests ever initiated. Operators check it after starting a test (via rupsTestId) to see how it concluded.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5491.10.1.7.3 snmpwalk -v2c -c public <target> RIELLOUPS-MIB::rupsTestResultsSummary
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5491.10.1.7.3.1 snmpget -v2c -c public <target> RIELLOUPS-MIB::rupsTestResultsSummary.1
Start monitoring Riello UPS units (RPS S.p.A.) (battery status/power-chain health) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RIELLOUPS-MIB::rupsTestResultsSummary OID value, configure state conditions and alerts, and monitor any Riello UPS units (RPS S.p.A.) (battery status/power-chain health) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5491 | rielloMIB | RIELLO-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5491.10 | rupsMIB | RIELLOUPS-MIB |
| 1.3.6.1.4.1.5491.10.1 | rupsObjects | RIELLOUPS-MIB |
| 1.3.6.1.4.1.5491.10.1.7 | rupsTest | RIELLOUPS-MIB |
| 1.3.6.1.4.1.5491.10.1.7.3 | rupsTestResultsSummary | RIELLOUPS-MIB |