RIELLOUPS-MIB :: rupsOutputPeakCurrent

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RIELLOUPS-MIB › rupsOutputPeakCurrent

rupsOutputPeakCurrent

Module: RIELLOUPS-MIB

OID (symbolic): RIELLOUPS-MIB::rupsOutputPeakCurrent

OID (numeric): 1.3.6.1.4.1.5491.10.1.4.4.1.6

Node type: OBJECT-TYPE

Type: NonNegativeInteger

Access: read-only

Description: The present output peak current.

What is rupsOutputPeakCurrent?

This reports the present peak output current, in tenths of an RMS amp, on one of the UPS's output lines. It captures short-duration current spikes (such as from equipment inrush) that an average-current reading would smooth over.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5491.10.1.4.4.1.6
snmpwalk -v2c -c public <target> RIELLOUPS-MIB::rupsOutputPeakCurrent

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5491.10.1.4.4.1.6.1
snmpget -v2c -c public <target> RIELLOUPS-MIB::rupsOutputPeakCurrent.1

Start monitoring Riello UPS units (RPS S.p.A.) (battery status/power-chain health) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RIELLOUPS-MIB::rupsOutputPeakCurrent OID value, configure state conditions and alerts, and monitor any Riello UPS units (RPS S.p.A.) (battery status/power-chain health) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5491rielloMIBRIELLO-MIB
Numeric OIDNameModule
1.3.6.1.4.1.5491.10rupsMIBRIELLOUPS-MIB
1.3.6.1.4.1.5491.10.1rupsObjectsRIELLOUPS-MIB
1.3.6.1.4.1.5491.10.1.4rupsOutputRIELLOUPS-MIB
1.3.6.1.4.1.5491.10.1.4.4rupsOutputTableRIELLOUPS-MIB
1.3.6.1.4.1.5491.10.1.4.4.1rupsOutputEntryRIELLOUPS-MIB
1.3.6.1.4.1.5491.10.1.4.4.1.6rupsOutputPeakCurrentRIELLOUPS-MIB