All MIBs › RIELLOUPS-MIB › rupsAutoRestart
rupsAutoRestart
Module: RIELLOUPS-MIB
OID (symbolic): RIELLOUPS-MIB::rupsAutoRestart
OID (numeric): 1.3.6.1.4.1.5491.10.1.8.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Setting this object to 'on' will cause the UPS system to restart after a shutdown if the shutdown occurred during a power loss as a result of either a upsShutdownAfterDelay or an internal battery depleted condition. Setting this object to 'off' will prevent the UPS system from restarting after a shutdown until an operator manually or remotely explicitly restarts it. If the UPS is in a startup or reboot countdown, then the UPS will not restart until that delay has been satisfied.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5491.10.1.8.5 snmpwalk -v2c -c public <target> RIELLOUPS-MIB::rupsAutoRestart
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5491.10.1.8.5.1 snmpget -v2c -c public <target> RIELLOUPS-MIB::rupsAutoRestart.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5491.10.1.8.5.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5491 | rielloMIB | RIELLO-MIB |
| 1.3.6.1.4.1.5491.10 | rupsMIB | RIELLOUPS-MIB |
| 1.3.6.1.4.1.5491.10.1 | rupsObjects | RIELLOUPS-MIB |
| 1.3.6.1.4.1.5491.10.1.8 | rupsControl | RIELLOUPS-MIB |
| 1.3.6.1.4.1.5491.10.1.8.5 | rupsAutoRestart | RIELLOUPS-MIB |