RFC1315-MIB :: frCircuitThroughput

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsRFC1315-MIBfrCircuitThroughput

frCircuitThroughput

Module: RFC1315-MIB

OID (symbolic): RFC1315-MIB::frCircuitThroughput

OID (numeric): 1.3.6.1.2.1.10.32.2.1.14

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Throughput is the average number of 'Frame Re- lay Information Field' bits transferred per second across a user network interface in one direction, measured over the measurement inter- val.

If the configured committed burst rate and throughput are both non-zero, the measurement interval T=frCircuitCommittedBurst/frCircuitThroughput.

If the configured committed burst rate and throughput are both zero, the measurement in- terval T=frCircuitExcessBurst/ifSpeed.

What is frCircuitThroughput?

Sets, in bits per second, the average rate of Frame Relay information transferred across the interface in one direction, used with frCircuitCommittedBurst or frCircuitExcessBurst to derive the traffic measurement interval; zero means no commitment.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.32.2.1.14
snmpwalk -v2c -c public <target> RFC1315-MIB::frCircuitThroughput

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.10.32.2.1.14.1
snmpget -v2c -c public <target> RFC1315-MIB::frCircuitThroughput.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.10.32.2.1.14.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> frCircuitThroughput.1

Start monitoring vendor-neutral, standards-based Frame Relay DTE MIB, router/FRAD with Frame Relay interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1315-MIB::frCircuitThroughput OID value, configure state conditions and alerts, and monitor any vendor-neutral, standards-based Frame Relay DTE MIB, router/FRAD with Frame Relay interfaces from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.10transmissionCHECKPOINT-MIB-2
1.3.6.1.2.1.10.32frameRelayDTEFRAME-RELAY-DTE-MIB
1.3.6.1.2.1.10.32.2frCircuitTableFRAME-RELAY-DTE-MIB
1.3.6.1.2.1.10.32.2.1frCircuitEntryFRAME-RELAY-DTE-MIB
Numeric OIDNameModule
1.3.6.1.2.1.10.32.2.1.14frCircuitThroughputRFC1315-MIB