All MIBs › RFC1315-MIB › frCircuitExcessBurst
frCircuitExcessBurst
Module: RFC1315-MIB
OID (symbolic): RFC1315-MIB::frCircuitExcessBurst
OID (numeric): 1.3.6.1.2.1.10.32.2.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This variable indicates the maximum amount of uncommitted data bits that the network will at- tempt to deliver over the measurement interval.
By default, if not configured when creating the entry, the Excess Information Burst Size is set to the value of ifSpeed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.32.2.1.13 snmpwalk -v2c -c public <target> RFC1315-MIB::frCircuitExcessBurst
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.32.2.1.13.1 snmpget -v2c -c public <target> RFC1315-MIB::frCircuitExcessBurst.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.10.32.2.1.13.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.32 | frameRelayDTE | FRAME-RELAY-DTE-MIB |
| 1.3.6.1.2.1.10.32.2 | frCircuitTable | FRAME-RELAY-DTE-MIB |
| 1.3.6.1.2.1.10.32.2.1 | frCircuitEntry | FRAME-RELAY-DTE-MIB |
| 1.3.6.1.2.1.10.32.2.1.13 | frCircuitExcessBurst | RFC1315-MIB |