All MIBs › RFC1289-phivMIB › phivRouteRoutingTimer
phivRouteRoutingTimer
Module: RFC1289-phivMIB
OID (symbolic): RFC1289-phivMIB::phivRouteRoutingTimer
OID (numeric): 1.3.6.1.2.1.18.5.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This value determines the maximum time in seconds allowed between Routing updates on non-Ethernet circuits. When this timer expires before a routing update occurs, a routing update is forced.
What is phivRouteRoutingTimer?
This sets the maximum seconds allowed between routing updates on this node's non-Ethernet (e.g. point-to-point) circuits before one is forced. Admins tune it to balance how fast topology changes propagate over serial links against update overhead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.18.5.12 snmpwalk -v2c -c public <target> RFC1289-phivMIB::phivRouteRoutingTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.18.5.12.1 snmpget -v2c -c public <target> RFC1289-phivMIB::phivRouteRoutingTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.18.5.12.1 i <value>
Start monitoring DECnet Phase IV network nodes with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1289-phivMIB::phivRouteRoutingTimer OID value, configure state conditions and alerts, and monitor any DECnet Phase IV network nodes from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.18 | phiv | DECnet-iv |
| 1.3.6.1.2.1.18.5 | routing | DECnet-iv |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.18.5.12 | phivRouteRoutingTimer | RFC1289-phivMIB |