All MIBs › RFC1289-phivMIB › phivEthHardwareAddr
phivEthHardwareAddr
Module: RFC1289-phivMIB
OID (symbolic): RFC1289-phivMIB::phivEthHardwareAddr
OID (numeric): 1.3.6.1.2.1.18.9.1.1.5
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: This read-only parameter is the address that is associated with the line device hardware as seen by the DECnet Software. This value is not the same as ifPhysAddress.
What is phivEthHardwareAddr?
This read-only value is the hardware address DECnet software associates with this line's device, which is not necessarily the same as the SNMP ifPhysAddress. Admins compare the two when troubleshooting an address mismatch between the DECnet and IP/SNMP views of the same interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.18.9.1.1.5 snmpwalk -v2c -c public <target> RFC1289-phivMIB::phivEthHardwareAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.18.9.1.1.5.1 snmpget -v2c -c public <target> RFC1289-phivMIB::phivEthHardwareAddr.1
Start monitoring DECnet Phase IV network nodes with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RFC1289-phivMIB::phivEthHardwareAddr OID value, configure state conditions and alerts, and monitor any DECnet Phase IV network nodes from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.18 | phiv | DECnet-iv |
| 1.3.6.1.2.1.18.9 | ethernet | DECnet-iv |
| 1.3.6.1.2.1.18.9.1 | phivEthLinkParametersTable | DECnet-iv |
| 1.3.6.1.2.1.18.9.1.1 | phivEthLinkParametersEntry | DECnet-iv |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.18.9.1.1.5 | phivEthHardwareAddr | RFC1289-phivMIB |